IP Camera/Video Server
Brochure for IE of customerContent
When the network already knows the IP addresses after the cameras can 打开IE directly into IP addresses and then by feel, can connect to our network cameras for. Will be activated when you connect a Duihuakuang for importing user names and passwords. If managers are the initial use of admin user name, password for the space. Following chart :
Will be pressed into our operations to identify the main picture (see chart)
Introduce function of home page as bellow:
(1)play、stop 、kinescope button
(2)Hold chart
(3)View Size
(4)This part is pan control function
(5)Function
The functional set value option, divided into four categories according functional large projects, namely Basic Configuration, Advance Configuration, live View and Rec View. On the broadcast, video detailed functional information, please View the live web reference guide.
Web Page Function Interpretation
1) Basic Configuration
STATUS
Can see System Information、IP Address、Camera Information、Wireless Status from this function:
1. shows the current version of the software and network products or LAN time MAC IP gateway address, etc.
2.Two video formats : Pal-NTSC
3 shows the number of users browsing current networking products
Note: Option 1,2 is configuration of leaving factory above, Option 3 is configuration of user (set management page)
Bellow chart:
ADMINISTRATOR
In this function, users can set to change the name and Camera name, such as icon:
<1>User List
Here can add or delete user account number
<2>Add New User
After pressing Add appear a window, where the user can set user names and passwords
<3>Anonymous User Setting
Here is asked whether to open the Anonymous functions, if users do not require opening the account number and password will allow the user access. User access only the competence of the users.
<4>Camera Name
Here you can based on the needs or preferences to change your IP-Cam name. Side of the name can be changed in the use of IP quoted Gert time to see.
CHANGE PASSWORD
In this function, you can now simply change the password of users, such as icon
NETWORKING
Change IP address、Subnet mask、Default router、DNS server address and HTTP port，such as chart：
<1>IP Address Configuration
There are two ways to set IP, an IP Address through DHCP服务 to obtain another directly set its IP. When you use when clicking View DHCP服务 the click, you can know your current IP via DHCP Server received a number of locations.
<2>DNS Configuration D。
This is a DNS Server traffic. We plank allow storage two DNS Server. When you use DHCP服务, you may choose to provide DHCP Server DNS Server.
<3>HTTP
Here you can set the output signal available. Note : Http 80 port is the port transmission format, the default values 80. If you changed to 1000, when when you want to browse this page to be added in : 1000 for the position, for example IP 192.168.1.100 When Port1000 after this change to be connected to the location of 192.168.1.100:1000. Cost of : scope 1-65535 network as audio products available (default values are 80), if in the same local area network installed within two or more network products, and through routers and other network domain or Internet connections, is likely to meet with the router and the need for networking products for each different port of.
<4>DHCP Clone Mac
Mac Address can be set here. Here is to be able to use the Cable Modem.
WIRELESS LAN
In this function, we can do some Wireless settings such as channel, SSID and confidential setting, such as signs :
Basic Configuration
<a>Operation Mode
There are two models available, one is Infra (Infrastructure J.P.S.) Another is Ad-Hoc J.P.S.. If the general use of AP, then please choose Infra mode data transmission If so, please choose Ad-Hoc model. Default values are Infra.
<b>Wireless Type
There are two models with a choice of default is shared by 802.11b and g mode, another only 802.11b model. Default values are 802.11b/g mixed mode.
<d>Channel
<e>TX Rate
Here you can set the rate of transmission, a value Auto, 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54Mbps, options, default values are named.
<f>SSID
Here imported SSID to the SSID to be the same and you can link the AP. Default values are ipcam_wlan
<g>Ad-Hoc mode
Ad- Hoc here could set a pattern 802.11b and 802.11g transmission two models. Default values are 802.11b
Date & Time Setting
This function can be set to change in the date and time, such as signs :
<1>Current Server Time
Can see here the current products that time
<2>Time Zone
Can choose time zone here
<3>Time Mode
Update Server Time: Here the computer can be automatically updated with the same time, we can update the manual entry of time
Video Settings
1>Network Traffic Control
On J.P.S. provided for the PA, will automatically detect the current network environment, the light plant P/I frame rate and the ratio of value, and value to the current installed (frame rate or QP value) automatic adjustments. In other parameters are set up the same circumstances, the choice of frame rate, the code flow (that is, Bitrate) smaller; QP value of the code to choose a larger flow. Including : the choice of frame rate, frame rate, the plant will be set in the light of the conditions can not be met when P/I ratio unchanged, but will automatically reduce the time frame rate; choice QP value will be set by reference P/I ratio, When conditions did not meet the time frame rate unchanged plant, but will automatically reduce image quality.
2>Image Appearance
<a>Resolution
In this function could alter the picture resolution, we provide D1, Field, CIF, QCIF, four radio let you choose. The table is the essence of the resolution size :
D1 / Field / CIF / QCIFPAL / 720*576 / 720*288 / 352*288 / 176*144
NTSC / 720*480 / 720*288 / 352*240 / 176*144
Compression / 8 / 14 / 20 / 26 / 31
Frame rate / 170~850
kbps / 120~500 kbps / 110~360 kbps / 110~330 kbps / 110~270 kbps
<b>Compression
Image quality-depending on the image compression rate, the higher the quality of images required greater bandwidth. In this function, images can change the compression ratio and resolution to the table for the set value CIF,P/I = 29 transmission speed.
There are bright colors adjusted for contrast gradient color saturation color adjustment figures in a range between 0-255 users may actually require adjustment.
<c>Brightness
Brightness adjustment 0~255 default values is128
<e>Saturation
Saturation adjust 0~255 default value is 128
<f>Hue
Color adjust 0~255 default value is 0
3> Video stream
A frame rate video stream (frame frequency) 1-30fps located P/I see one choice for value
<a>Limit frame rate to
In this function could alter the frame rate per second transmission Zhang requirements (Zhang few more images transmitted more fluid).
<b>P/I Ratio(P frame；I frame)
In this function, and I can change the ratio P (when I picture more clearly the higher the proportion of the relative volume of data transmission will also big).
<c>New Prediction
This function can be set in light of the preceding I frame as the current I frame.
4> Motion Detection
Sensitivity testing a mobile customers (min Ling degrees) can set the value of Erosion in the 0-255 is a motion detection, small Fanggezi colour picture shows the depth Dilation is a motion detection, Fanggezi small size (to be opened to detect the movement of the option to be valid).
<a>Sensitivity
In this function could alter the picture detection sensitivity, the more sensitive areas 1~999 smaller figures.
<b>Erosion
It is in this function that will detect the picture of the dynamics of excess point deleted. 0~8,0 of scope is not deleted.
<c>Dilation
This function can be detected by dynamic picture of vacancies deleted. 0~8,0 scope is the importation of fill.
<d>Motion Detection enabled
Open or close this function
5> Water Mark Enabled
Open or closed Watermark function. Watermark marking (Water Mark) audio products such as watermarks for the network technology can prevent attempts to modify photographs and video.
6> Snap Shot
Snap a photo to match pictures interception kept trails (the hard disk can be any Panfu), and its colour labelling
<a>Path & File Name
A photo of trails and documents were stored
<b>Label Color
Juanbiao set of colours.
<c>Time Label
Open or close time label function
7> OSD
Text labels - impact images can write up a 0-255 characters, which have relatively large images help identify which words show colour (0-255 value), the letter indicated coordinates (X axis, Y axis) is the prerequisite condition for the opening of OSD to enter into force.
<a>OSD Text
You want to show images of the characters in the text frame. (limited English)
<b>Color
You can choose to show text color defaults 0~255.
<c> X
You have to show that the coordinates of the letter X axis.
<d>Y
You have to show that the coordinates of the letter Y axis.
<e>OSD Enabled
Whether opening OSD functions.
AUDIO
1> Audio Compression
Voice compression quality, we provide 16, 24, 32, 40kbit/s these four compression quality.
2>Data Format
Voice compression format, we provide A-law, U-law both voice compression format.
3>Audio Volume
Voice volume adjustment in the scope 0~4
4>Audio Enabled
Whether open voice
LOG
In this single persons can check the name, IP Address and changes in the entire time, such as signs :
1>Log Configuration
<a>Mode
Can choose storage records. We have to provide records in the purchase or Flash storage records both ways.
<b>Flash write time
When you set them to be stored in Flash, you can set the record in Flash, how frequently. Defaults 1~65535 minutes.
LOGOUT
When you press the Logout, will be cancelled log figure below :
2）Advance Configuration MAINTENANCE
1> Maintain Server
<a>Restart
Reset function of the hardware to do.
<b>Restore
In addition to IP addresses, the other set is set to default values.
<c>Default
Will be all set to default values are restored.
2> Upgrade Server
Press the browse button, select Firmware (ruling stalls) files, the press after the Upgrade button you will begin to do the Firmware update moves.
DDNS
In this function can be set DDNS service, such as signs :
To use DDNS service, and you must have support from our two free DDNS Server so registered movements, otherwise unusable. Related information can go to their website for details.
1> Chose Server
You may choose to use your DDNS Server, we are providing DYN DNS Server and Peanut Hull provide you choose two.
2> DNS Account
When you apply for DDNS Server services to the account. Host Name of your website, such as your application is out of the Host SZDONGXIANG.VICP.NET then this is your Name.
3> User Name
Please input your name for the account number.
4> Password
Please input your account number for the password.
5> Manual_ Up data
Press this button to manually update to inform you of new IP DDNS Server location.
SMTP E-MAIL
This function can be set in a simple letter transmission functions, such as signs :
When a mail server, you can set the ISP you use for mail server operators, regardless of what type you use mailboxes, as long as a good mail server can use the function. For example, the network is used to connect the circuits provided Hinet, you have to send the mail is So-net, at the mail server will fill Hinet the mail server.
1> SMTP Settings
<a>Primary mail server
mail server。
Enactment Primary mail server
<b>secondary mail server
A deputy to the mail server, this is not a negative, but the main mail server must have.
<c>From E-Mail address
Use any mail sent out letters.
<d>Authentication
If the mail when you need to send a letter to the accreditation, please trouble here lay Yes, and the importation of your User name and Password column in the following input box.
2> Test
Input mail box you will send
Support 3）Live View
We live View menu count will start coming into see the home page, here is the live View of the screens.
Introduce function of live View of screen
Play:
Stop:
REC:
The current account recorded photographic images, then two of the video will be stopped (the files stored in the C plate acquiescence catalogue)
Snap Shot: Currently photographic picture taken (this picture will be stored in the C plate underneath)
View Size: enlarged images of Beilu:, here we provide such as the four multiple x1/2,x1,x2,x4 For your choice.
Killers keys in a row following a button, I agree with the control button Goldwin
Up: Camera x units of time will be adjusted upwards
Down: Camera x units of time will be adjusted downwards
Left: Camera x units of time will be adjusted left
Right: Camera x units of time will be adjusted right
Zoom-: Camera will be near x units of Windows-time
Zoom+: Camera will be far units of Windows-time
Focus-: Adjust focus of camera near from x units of Windows-time
Focus+: Adjust focus of camera far from x units of Windows-time
Example:
figures in the right column appear Up "6" to press the "Up" button Want Camera focal length adjustment enlarged move ahead, in Focus+ right column of figures appear "2" then press the "Focus+" Niu
4）REC View
Here, the page only broadcast the video recording, when pressed button will begin broadcasting games before the video recording, press the Stop button when the video stopped. If the stop button is automatically video has been broadcast back.