BPSX 30U 30W Solar Panel

List Price: / $401.69
Our Price: / $232.33 Save: $169.36 (42%)
Model: / BP SOLAR SX 30U
Brand: / BP Solar

Top of Form

Volts: / 12V
Amps: / 1.78A
Watts: / 30W
/ Our Code: BPS30-SX30U

There are currently no reviews. If you own this product write a review!

Product Documentation click to view

  • warranty_rev_1.pdf
  • BPSX20_30.pdf

These items are commonly used with the BPSX 30U 30W Solar Panel

Add-Ons

PV Wire by the Foot 10AWG 1 Conductor

ATTENTION: BP Solar has identified a potential problem with certain BP Solar modules operating in specific installation environments and applications. Please read this product advisory before purchasing.

BP Solar
Model: SX 20 / SX 30
Performance Multicrystalline
20/30 watts

BP SX 20 and BP SX 30 photovoltaic modules are part of BP Solar's SX module series, providing cost-effective photovoltaic power for DC loads with moderate energy requirements. With 36 multicrystalline cells in series, they charge batteries efficiently in virtually any climate. Typical commercial applications of these modules, which generate nominal maximum power of 20 watts and 30 watts respectively, include remote telemetry, instrumentation systems, security sensors, signals, and land-based navigation aids.
These modules are available in three configurations: the M configuration, which includes the versatile Multimount™ frame and an output cable; the D configuration, which mounts directly to many surfaces without additional hardware; and the U configuration, which includes the heavy-duty Universal frame and a high-volume junction box with dualvoltage output. In all configurations, cells are laminated between sheets of ethylene vinyl acetate (EVA) and high-transmissivity low-iron 3mm tempered glass.

High-Capacity Versatile Junction Box

The large (411cc, 25 cubic inches) junction box of the U modules is raintight (IP54 rated) and accepts PG13.5 or 1/2" nominal conduit or cable fittings. With its six-terminal connection block, it enables most system array connections (putting modules in series or parallel) to be made right in the junction box. Optionally, this junction box can be fitted with:

  • blocking and bypass diodes;
  • an oversize terminal block which accepts conductors up to 25mm2 (AWG #4); standard terminals accept up to 6mm2 (AWG #10);
  • a Solarstate™ charge regulator.

The BPSX 20U and 30U junction box may be field-wired to provide 12V or 6V nominal output. Six-volt modules are intended to support 6V loads, and are not recommended as series elements in higher voltage arrays. The BPSX 20U and 30U are approved by Factory Mutual Research for application in NEC Class 1, Division 2, Groups C & D hazardous locations.

Specifications

SX 20/30U Dimensions

Customers who bought the BPSX 30U 30W Solar Panel also purchased:

  • Steca Solsum8.8 8A 12/24V Charge Controller
  • MorningstarSunguard 4.5A, 12V Pwm Charge Cntrlr
  • MK 8A22NF 55 Ah (20 Hr) AGM Sealed Battery
  • Morningstar Sunlight 10-12 10A, 12V Light Controller
  • Laing D5 Solar/090B PV-Direct Circulating Pump
  • IronRidge Uni-Sp/01A Side-Of-Pole W/27" Support