BOOK: Support SECTION: Fleet Maintenance Practice Test-55 questions (SERGEANT) OCFD.com

1. According to Fleet Maintenance SOP (OPS/006), which of the following should be turned off before backing into the rig room?

  1. Lights
  2. Accessories
  3. A & B
  4. None of the above

2. According to Fleet Maintenance SOP (ADN/002), who will respond to all third alarms and remain on scene until released by the Incident Commander?

  1. The Maintenance Chief
  2. The “Stand-By” Duty Mechanic
  3. The Shop Floor Supervisor
  4. The “On Call” Duty Mechanic

3. According to Fleet Maintenance SOP (OPS/004), where are requests for repair of nozzles, small engines, and hose sent?

  1. Request is sent to Maintenance Services
  2. Request is sent to Operations Division Warehouse
  3. Request is sent to Support Division Warehouse
  4. Request is sent to the Breathing Air Shop

4. According to Fleet Maintenance SOP (ADN/001), who is responsible for enforcing regulations and guidelines for Fleet Maintenance Operating Procedures?

  1. Chief of Support Services
  2. Chief of Operations
  3. Fire Chief
  4. Maintenance Chief

5. According to Fleet Maintenance SOP (OPS/013), once a work order has been entered on Fireweb for preventative maintenance that is due, who will call to set an appointment for the vehicle to receive it’s PM?

  1. Fleet Maintenance Coordinator
  2. Field Operations Supervisor
  3. Maintenance Assistant Chief
  4. Shop Supervisor

6. According to Fleet Maintenance SOP (OPS/008),when approaching an icy grade and you don’t have the automatic chains engaged, to what speed do you slow down to engage the automatic chains?

  1. 0 mph, not moving
  2. 5 mph
  3. 25 mph
  4. 30 mph

7. According to Fleet Maintenance SOP (OPS/014), what type of motor oil is used in the power steering reservoir of Emergency One (E-One) apparatus (RL, Platforms, Engines, Telebooms, Squads, and HazMat)?

  1. 5W-30
  2. 5W-40
  3. 10W-30
  4. 10W-40

8. According to Fleet Maintenance SOP (OPS/009), if an apparatus is in danger of further damage by fire or floodwater, who can authorize the use of any towing equipment available?

  1. Company Officer
  2. District Officer
  3. Apparatus Operator
  4. A or B

9. According to Fleet Maintenance SOP (OPS/013), who is responsible for notifying Maintenance Services when a fire department vehicle becomes due for service?

  1. District Officers
  2. Station Officers
  3. Assigned Apparatus Operators
  4. Any employee

10. According to Fleet Maintenance SOP (OPS/013), which of the following informational items appear on a PM Sticker?

  1. Vehicle number
  2. Oil type
  3. Mileage
  4. All of the above

11. According to Fleet Maintenance SOP (OPS/004), which of the following can appear on the same work order as the apparatus work order?

  1. SCBA
  2. Rescue Tools
  3. K12 Saws
  4. None of the above

12.According to Fleet Maintenance SOP (OPS/015), how long should the preheat button be held on new E-One rescue ladders prior to the first attempt to start the AC generator?

  1. 15 seconds
  2. 30 seconds
  3. 45 seconds
  4. 60 seconds

13. According to Fleet Maintenance SOP (OPS/011), with whom should personnel check to ensure that they receive the right colors of paint for their respective apparatus?

  1. Supply Room Foreman
  2. Lead Mechanic
  3. Manufacturer’s Representative
  4. District Officer

14. According to Fleet Maintenance SOP (OPS/013), vehicle inspections stickers are required for which of the following vehicles?

  1. Rescue Ladders
  2. Fire Department automobiles
  3. A & B
  4. None, inspections are no longer required by law

15. According to Fleet Maintenance SOP (OPS/007), how are Oxygen Cascade System readings reported?

  1. By calling the Air Shop by 0900
  2. By calling the Maintenance shop by 0930
  3. By calling Dispatch by 0900
  4. By entering reading on Fireweb

16. According to Fleet Maintenance SOP (OPS/008), what is the maximum speed when driving with tire chains?

  1. 25 mph
  2. 30 mph
  3. 35 mph
  4. 38 mph

17. According to Fleet Maintenance SOP (ADN/002), how long are approved break times for Fleet Maintenance employees?

  1. 8 minutes
  2. 10 minutes
  3. 15 minutes
  4. 30 minutes

18. According to Fleet Maintenance SOP (OPS/009), unless a vehicle is in danger of further damage, what vehicles are allowed to tow fire department vehicles?

  1. FD Wreckers
  2. Brush Pumpers
  3. Contracted Wrecker Service
  4. A or C

19. According to Fleet Maintenance SOP (OPS/004), how can work requests submitted be checked?

  1. By clicking on Work Request Query on Fireweb
  2. By clicking on Status of Work Request on Fireweb
  3. By clicking on Submissions on Fireweb
  4. A or B

20. According to Fleet Maintenance SOP (OPS/009), at what distance or greater off the roadway does a rig have to be to require a 4-wheel drive wrecker?

  1. 50 feet
  2. 75 feet
  3. 100 feet
  4. 150 feet

21. According to Fleet Maintenance SOP (OPS/011), where can proper paint and supplies for repainting apparatus be obtained?

  1. Maintenance Services - Supply Room Foreman
  2. Maintenance Services - Lead Mechanic
  3. Operations Warehouse
  4. None of the above

22. According to Fleet Maintenance SOP (ADN/002), who provides approval to use city equipment or to store employee vehicles on city property?

  1. Maintenance Chief
  2. Chief of Support Operations
  3. Fire Chief
  4. District Chief

23. According to Fleet Maintenance SOP (OPS/010), which of the following is true of quartz floodlights mounted on the roof of auxiliary apparatus?

  1. They are made to swivel
  2. They can go up and down
  3. A & B
  4. None of the above

24. According to Fleet Maintenance SOP (OPS/008), which hook should be connected first when installing tire chains?

  1. Outside drag hook
  2. Inside speed hook
  3. Outside snag hook
  4. Inside rim hook

25. According to Fleet Maintenance SOP (OPS/013), what is the mileage at which fire department vehicles must be serviced if the yearly requirement has not been met?

  1. every 3,000 miles
  2. every 3,500 miles
  3. every 4,000 miles
  4. every 5,000 miles

26. According to Fleet Maintenance SOP (OPS/008), while using the automatic tire chains in reverse, the chains will work best above what speeds?

  1. 5 to 7 mph
  2. 7 to 10 mph
  3. 10 to 12 mph
  4. 12 to 15 mph

27. According to Fleet Maintenance SOP (OPS/011), touch-up painting applies to which of the following vehicles?

  1. Automobiles
  2. Trucks
  3. 3/4 ton vans
  4. None of the above

28. According to Fleet Maintenance SOP (OPS/015), if the AC generator on a new E-One rescue ladder does not start on the first try, what should be done before attempting to restart?

  1. Wait 30 seconds, then pre-heat again for a few seconds
  2. Wait 20 seconds, then pre-heat again for 60 seconds
  3. Wait a few seconds, then pre-heat again for 30 seconds
  4. Wait a few seconds, thenrestart

29. According to Fleet Maintenance SOP (OPS/003), who reports day emergency repairs?

  1. Rig Driver
  2. Company Officer
  3. Any employee
  4. District Officer

30. According to Fleet Maintenance SOP (OPS/009), who should you notify first of a disabled vehicle?

  1. Duty Mechanic
  2. District Officer
  3. Maintenance Chief
  4. Dispatch

31. According to Fleet Maintenance SOP (OPS/004), where should correct tire pressure be found?

  1. By calling the maintenance shop
  2. Inthe rig’s manual
  3. On the side wall of the tire
  4. All of the above

32. According to Fleet Maintenance SOP (OPS/002),how much compensation time does the Duty Mechanic receive for the “Call Week”?

  1. 21 hours
  2. 28 hours
  3. 32 hours
  4. 48 hours

33. According to Fleet Maintenance SOP (OPS/006), enginesshould be allowed to idle for at least how long to charge batteries after the daily apparatus check?

  1. 3 minutes
  2. 5 minutes
  3. 7 minutes
  4. 15 minutes

34. According to Fleet Maintenance SOP (OPS/001), when can the Duty Mechanic trade call weeks with another mechanic?

  1. If Deputy Chief approves it
  2. If Battalion Chief approves it
  3. If Maintenance Chief approves it
  4. If District Chief approves it

35. According to Fleet Maintenance SOP (OPS/006), by what time is an apparatus operator responsible for ensuring the apparatus is in working order?

  1. 0700
  2. 0715
  3. 0730
  4. 0800

36. According to Fleet Maintenance SOP (ADN/002), when can Fleet Maintenance personnel make personal phone calls?

  1. Any time, 15 minute time limit on phone
  2. Any time, 5 minute time limit on phone
  3. Any time, 2 minute time limit on phone
  4. Only during breaks, lunch hour, or non-work hours

37. According to Fleet Maintenance SOP (OPS/002), what is the procedure for notifying Duty Mechanic of an after hours repair?

  1. Company Officer gets approval from District Officer, then contacts Dispatch
  2. Company Officer gets approval from Station Officer, then contacts Dispatch
  3. Company Officer gets approval from District Officer, then contacts Duty Mechanic by phone or MDT
  4. Station Officer gets approval from Dispatch, then contacts Duty Mechanic by phone

38. According to Fleet Maintenance SOP (OPS/001), what is the normallunch hour for Maintenance Services employees?

  1. 11am to 12pm
  2. 11am to 1pm
  3. 11:30am to 12:30pm
  4. 11:30am to 1:30pm

39. According to Fleet Maintenance SOP (OPS/002), during what times does the Duty Mechanic drive a shop vehicle to and from their residence for after hours repairs?

  1. 5pm Monday through 8am the following Monday
  2. 4pm Monday through 7am the following Monday
  3. 7am Sunday through 7am the following Sunday
  4. 7amMonday through 7am the following Monday

40. According to Fleet Maintenance SOP (OPS/008), when tire chains are laid out in front or rear of tires prior to installation, what direction should the hooks be facing?

  1. Inward (curved portion of hook faces toward the tire sidewall)
  2. Outward (curved portion of hook faces away from tire sidewall)
  3. Forward (curved portion of hook faces forward of tailboard)
  4. Backward (curved portion of hook faces backward from tailboard)

41. According to Fleet Maintenance SOP (OPS/008), for maximum efficiency while using the automatic tire chains, what minimum speed should be maintained?

  1. 5 mph
  2. 7 mph
  3. 10 mph
  4. 15 mph

42. According to Fleet Maintenance SOP (OPS/013), where is a vehicle's PM Sticker located?

  1. On the edge of the driver's door
  2. Under the cab on the engine plate
  3. On the left upper portion of the windshield
  4. On the left lower portion of the windshield

43. According to Fleet Maintenance SOP (OPS/003), when calling Maintenance Services for a day emergency repair, into what system is the repair entered to generate a work request?

  1. F-4 System
  2. M-4 System
  3. T-4 System
  4. Q-4 System

44. According to Fleet Maintenance SOP (OPS/001), what are the normal hours of operation for Maintenance Services?

  1. 8am to 4pm
  2. 8am to 5pm
  3. 7am to 4pm
  4. 7am to 5pm

45. According to Fleet Maintenance SOP (OPS/008), with whom should arrangements for repairs of tire chains be made?

  1. Call the MaintenanceCenter (297-1300), and make arrangements with shop foreman to have tire chains picked up
  2. Contact District Officer
  3. Contact Duty Mechanic through Dispatch
  4. A or B

46. According to Fleet Maintenance SOP (OPS/004), how are work order requests submitted to Maintenance Services?

  1. With a completed Request for Service form
  2. With a completed Request for Repair form
  3. Entered into a Work Request form on Fireweb
  4. None of the above

47. According to Fleet Maintenance SOP (OPS/009.1), when using a brush pumper to get another brush pumper unstuck, what gear should both vehicles be in?

  1. High 2WD
  2. Low 2WD
  3. High 4WD
  4. Low 4WD

48. According to Fleet Maintenance SOP (OPS/002), which of the following constitutes an emergency repair?

  1. 1 headlight out
  2. 2 warning lights out
  3. A & B
  4. None of the above are emergency repairs

49. According to Fleet Maintenance SOP (OPS/011), what is the proper color scheme for vehicles with rear dual wheels?

  1. Wheels painted RED with the bead painted ALUMINUM
  2. Wheels painted RED with the bead painted RED
  3. Wheels painted ALUMINUM with the bead painted ALUMINUM
  4. Rear duals do not require painting

50. According to Fleet Maintenance SOP (ADN/001), what happens if a policy matter is not covered by bargaining agreement or department policies?

  1. City Manager will make a policy decision
  2. Personnel Policies are enforced
  3. The City council rules on the matter
  4. The Fire Chief rules on the matter

51. According to Fleet Maintenance SOP (OPS/004), which of the following are acceptable for reporting repairs NOT of an emergency nature?

  1. Paper work order request through interdepartmental mail
  2. Calling maintenance shop
  3. Work order submitted through Fireweb
  4. B or C

52. According to Fleet Maintenance SOP (OPS/002), when does the duty mechanic determine if a rig should be traded out?

  1. If repairs can NOT be made within 30 minutes
  2. If repairs can NOT be made within 1 hour
  3. If repairs can NOT be made within 2 hours
  4. If repairs can NOT be made within 3 hours

53. According to Fleet Maintenance SOP (OPS/007), on what days are Oxygen Cascade Systems readings taken for reporting?

  1. Mondays and Wednesdays
  2. Tuesdays and Thursdays
  3. Mondays and Thursdays
  4. Wednesdays and Fridays

54. According to Fleet Maintenance SOP (OPS/006), at what rpm range should the engine be allowed to idle after the daily check?

  1. 1,000 to 1,200 rpm
  2. 1,200 to 1,500 rpm
  3. 1,250 to 1,500 rpm
  4. 1,500 to 2,000 rpm

55. According to Fleet Maintenance SOP (OPS/005), when can an apparatus operate in the rig room if an adequate number of overhead doors are open?

  1. When testing lights
  2. When testing PTO generators
  3. When testing pump
  4. Maintenance repairs

Answer Sheet
1 / 31
2 / 32
3 / 33
4 / 34
5 / 35
6 / 36
7 / 37
8 / 38
9 / 39
10 / 40
11 / 41
12 / 42
13 / 43
14 / 44
15 / 45
16 / 46
17 / 47
18 / 48
19 / 49
20 / 50
21 / 51
22 / 52
23 / 53
24 / 54
25 / 55
26
27
28
29
30
Answer Key
1 / C / 31 / C
2 / D / 32 / C
3 / B / 33 / B
4 / D / 34 / B
5 / B / 35 / A
6 / C / 36 / D
7 / D / 37 / A
8 / D / 38 / A
9 / C / 39 / B
10 / D / 40 / B
11 / D / 41 / A
12 / D / 42 / C
13 / A / 43 / B
14 / C / 44 / C
15 / D / 45 / D
16 / B / 46 / C
17 / C / 47 / D
18 / A / 48 / D
19 / D / 49 / A
20 / C / 50 / B
21 / C / 51 / C
22 / C / 52 / C
23 / B / 53 / C
24 / B / 54 / A
25 / D / 55 / D
26 / B
27 / D
28 / C
29 / B
30 / D

Page 1 of 8 Unauthorized Duplication Prohibited FireNotes® 2005 (revised 3/19/05)

Disclaimer: These test questions were created for informational purposes and are not actual promotional exam questions. They are designed to assist in studying the OCFD SOPs. These questions are in no way related to, or approved by the City of OKC. FireNotes®.com, OKCFire.com, and Mike Nikkel are in no way liable for any errors in content, grammar, or other errors. Use at your own risk.