BLUETOOTH PORTABLE SPEAKER

User Manual

(VERSION 1.0)

User Manual

  1. Before you use this device, please make sure that you:
  2. Fully charge the device at least 3 hours before you use it the first time. Afterward it takes approximate 2 hours to fully recharge power. (Please refer to 3.1 showed below for details.)
  3. Before using the speaker you should pair it with a Bluetooth mobile phone or other Bluetooth devices. The Bluetooth connection between the speaker and your device can be established by setting up a PAIRED link. (Please refer 3.2 showed below for details.)
  1. Introduction
  2. Product Specification

Certifications / BQB, CE, FCC, UL, DGT
Bluetooth / Bluetooth® v1.2, class 2, up to 10 meters
Supported profiles / HSP / HFP / A2DP / AVRCP
Frequency Band / 2.4~2.4835GHz (ISM)
Autonomy / 5 hours : playing mode
48 hours : standby mode
Battery / 3.7V Li-Polymer rechargeable battery
Environment / Operating temperature : -10°C ~ + 70°C
Storage temperature : -40°C ~ + 80°C
Dimensions / 180mm x 78mm x 36mm
Weight / 360g
Power / 2 x 2 watt

2.2Product Outlook

  1. Prepare to use the product
  2. Power Supply and Charging
  3. As soon as power jack have been connected, the device charging can be progressed under “ON” or “OFF” circumstance.
  4. The battery must be charged with the appropriate charger, one AC5V adapter is enclosed in the package.

3.2Pairing and establish a connection

Please make sure you have paired the product with Bluetooth AV sources before you start to use. Please follow the pairing procedure shows hereunder:

1)Turn on the speaker using the “On/Off” button and hold button (about 6 seconds) till LED blinks rapidly. You will hear a bip. At this moment, the speaker is in the pairing mode.

2)To activate Bluetooth connection from the device you would like to connect to the speaker, please follow the user manual instruction. The pass key to establish connectionis 0000.

3)The speaker supports two audio connections. Please select HEADSET/HANDSFREE (headset) profile if you like to connect to the mobile phone. Or A2DP/AVRCP (speaker) profile for stereo sound effect to your audio sourcing.

4)Once connected, the LED will blink twice every second.

Note: If the pairing can not be established within 60 seconds, the blue LED turns to regular blinking once every 2 second automatically. A re-pairing procedure is needed. Please repeat pairing procedure listed above.

3.3Audio Streaming via Bluetooth

3.3.1To play music via a Bluetooth AV Transmitter, please make sure the speaker has been connected with the transmitter, blue indicator will be blinked rapidly 2 times per second.

Note: If the device connected does not support AVRCP profile (remote control) function button will act as “mute” function.

3.3.2To play music via a Bluetooth USB Dongle, please complete AV pairing and then activate intended audio player interface afterward, the music will be transmitted to the speaker automatically.

Note: The Bluetooth USB Dongle should support AVRCP profile to activate “remote control” function.

3.4Mobile phone operation

3.4.1Check your mobile phone’s user manual to find out the paragraph about Bluetooth Connectivity and follow the instruction to complete pairing with the speaker. If your mobile phone supports only HANDSFREE profile, please activate connection from the mobile phone.

3.4.2Mobile phone will always be the top priority, since an incoming/outgoing has been progressed, it interrupts actively and the on-going music will be muted. As soon as the call has been hangs up, the music rebound afterward.

3.5Connecting Audio players directly by 3.5mm AV cable

Equipped a rear line-in jack to directly connect to audio sources (MP3 player, laptop…). Please disconnect Bluetooth Connection with audio sources firstly. Simply plug the 3.5mm AV cable into the line-in jack and the other end to audio sources, then press button to play music. All functional buttons on the device will be disable as soon as line-in jack has been connected, please operate function from the audio sources directly.

3.6Connecting external Microphone with 2.5 mm jack

Equipped a Mic-in jack for external microphone, simply plug the connector into the jack and turn the Mic on.

  1. LED : Blue (B) Green (G) Amber (A)
  2. (B) Blink tardily for 4 times = Power On
  3. (B) Blink rapidly = Pairing
  4. (B) Blink rapidly 3 times per second = During Communication
  5. (B) Blink rapidly 2 times per second = Playing Music
  6. (B) Blink tardily once per second = Connected and Standby
  7. (B) Blink rapidly once every 2 second = Standby without Connected
  8. (A) continuing blinking = Low Battery
  9. (A) light on = Charging
  10. (G) light on = Charging completed
  1. Operation Button and Symbol Definition
  2. Six Buttons:
  3. (+) Clip and release less than 1 second
  4. (++) Press and release for 2 seconds
  5. (vv) Click twice within 0.5 second
  6. 「(+++) Press and hold for more than 6 seconds

5.2Function Matrix

Function / Button / Operation / Condition
Pairing / / (+++) / Standby
Cancel Pairing / / (+++) / Pairing mode
Pick Up / / (+) / Incoming call
Hang Up / / (+) / During Communication
Voice Dialing / / (+) / Phone connected
Refuse Answering / / (++) / Incoming call
Last Call Redial / / (vv) / Phone connected
Switch to Handset / / (++) / Phone connected
Cancel Voice Dialing / / (+) / During Voice Dialing
Volume Up / / (+) / During Communication
Volume Down / / (+) / During Communication
Connect To Handset / / (+) / Disconnected
Play / / (+) / Stop or Pause
Pause / / (+) / Playing music
Stop / / (++) / Playing music
Forward / / (+) / Playing music
Backward / / (+) / Playing music

User Manual / Manuel d’utilisation

Version 1.0

REF:C02010023

© All rights reserved.

All trade names are registered trademarks of respective manufacturers listed.

The Bluetoothname and the Bluetoothtrademarks are owned by BluetoothSIG,Inc.

This manual may not be copied in any media or form without the written consent of original maker.