WJT ASSOCIATES' SCIENTIFIC MOLDING SEMINARS

Bill Tobin has been a professional in Plastics for more than 30 years. Bill has written more than 20 books and 250+ published articles. He is a frequent presenter and trainer at conventions and professional functions. His consulting firm WJT Associates provides services in all areas of injection molding as well as expert witness testimony.

The seminar is designed to give a better understanding of the injection molding process. Scientific Molding is not about transducers and signal processors. It requires a full understanding of the molding process from beginning to end. The seminar is very interactive with the class. It is presented in a light-hearted manner that is enjoyable to everyone.

In-house savings:

If you are considering sending more than three people AND traveling more than 200 miles to attend the seminar; contact us. It is probably cheaper for us to come to you and put on a seminar for more than 10 people at the same cost.

We’d be glad to entertain other locations for this seminar upon your suggestions.

Ideal for:

Setup Technicians

Troubleshooting Technicians

First (possibly second) level supervision

Maintenance Technicians

Process Engineering

Quality Control

Tool and Die Personnel

Expected Outcomes:

Optimized cycles times from the beginning

Maximum utilization of your equipment

A more professional workforce focused on productivity and profit

New tooling startups that don’t need to ‘be processed in’, or start with high scrap rates

Less miscommunication on standards

Lower initial and on going defects

Repeatable Quality

Be able to put the Science in to Scientific Molding. Learn how to do the experiments to OPTIMIZE your cycle;

  • Setting the clamp pressure
  • Setting the distances
  • Optimizing fill
  • Optimizing pack
  • Optimizing cool
  • Heat profiles

Construct a universal setup sheet that gives you the process settings automatically from one machine to another without having to start from scratch. Learn how to determine if you have a robust machine.

Learn when to submit samples to your customer.

QUALITY – take out the guess work. Learn how to define

  • Cosmetics
  • Function
  • Dimensions
  • The Universal Definition of Quality

What “acceptable” REALLY is

2017

WJT ASSOCIATES' SCIENTIFIC MOLDING SEMINARS

Details

Tuition $300.00 $250.00! each

Buy 3 get 4th Free

Note: A minimum attendance must be achieved for the seminar to go forward. You will be notified by e-mail one week before as to the status. Credit cards will not be charge nor checks cashed until the seminar‘s minimum has been met.

8:30 AM to 4:30PM Breaks and lunch (pizza) provided. Please arrive 8:15 - 8:30

Each attendee will get the book SCIENTIFIC MOLDING and CD with experiments, explanations and proceduresINSTRUCTIONS: - FILL IN GREY CELLS, SAVE, E-MAIL

Scientific Molding with Bill Tobin:

Seminar we will attend (from list below)

SEMINAR LOCATION / Cutoff date / Price
15 Feb 2017Homewood Suites - Warwick33 International WayWarwick, RI02886 / 8-feb / $250

Buy 3 get 4th Free

Note: A minimum attendance must be achieved for the seminar to go forward. You will be notified by e-mail one week before as to the status. Credit cards will not be charge nor checks cashed until the seminar‘s minimum has been met. (Visa or MasterCard preferred). You are advised against booking travel reservations until the class will go forward.

Name on credit card

Card number exp date (mm/yy) CVV#

Company City State Zip code

Phone e-mail

So you can be contacted as to the status of the seminar

Date email sent (for cut-off date purposes)

Instructions: Fill in information save file and email or Print file, Scan and e-mail to

If you are concerned about giving your credit card information on the internet, send it in two separate e-mails.

e-mail - SUBJECT - SCIENTIFIC MOLDING SEMINAR Phone with questions 303 604 9592

Name of attendees Job TitleEmail

1.

2.

3.

4.

5. Use additional sheet if necessary

2017