COURSE SYLLABUS

DT 100 B01

BASIC SHOP PRACTICES Fall Semester 2008 Instructor: Thomas Broadway 1.5 credit hour

Office Phone: 775-635-5436 (BMHS school)

775-635-9601 (cell)

Email:

PHILOSOPHY

Student and instructor are working toward common and practical goals which are discussed at the onset. Student and instructor will be actively involved in the process of learning. Guidelines for the course are specified but latitude is given to explore new ideas and concepts. Learning is a change in ones behavior; the road to change is marked by the instructor, and the student’s responsibility is to understand.

PURPOSE & COURSE GOALS

This course is designed to teach practical shop skills used in equipment repair facilities. Emphasis will be placed on hand and power tool identification, usage and maintenance. Shop procedures and measuring devices will be covered.

PREREQUISITE

None

COURSE OUTLINE

1. Shop Safety

2. Basic Shop Tools

3. Measuring Devices

4. Fasteners

5. Electric tool operation

REFERENCE MATERIALS

Required Text: TBA

Handouts:

- Course Outline

- Job Assignments

INDIVIDUAL STUDENT MATERIALS AND SAFETY EQUIPMENT

A.1)SAFETY GLASSES

2)HEARING PROTECTION

3) CLOTHING - a) COVERALLS; b) HARD-SOLE SHOES;

4) NO OPEN TOED SHOES

5) TAPE MEASURE

6) FLASHLIGHT

GRADING POLICY

LECTRUE ------ 50%

  • Notebook ------ 100 Points
  • TESTS & QUIZES ------ TBA
  • FINAL TEST------ 150 Points

LAB ------ 50%

LAB TASKS ARE 25 points each.

A = 90 to 100 %

B = 80 to 89 %

C= 70 to 79 %

D = 60 to 69 %

F = 59 % & below

Note Book Requirements

1.Each notebook should be in a three (3) ring binder.

2.Contents within the notebook are:

A.Cover sheetPage 1

1.Course name & number

2.Instructors name

3.Semester

4.Student name

B.Task Sheet------With SignaturesPage 2

C.Notes

Shop Practices Tasks

Completed / Competency
Wears protective clothing
Uses common shop courtesy
Keeps work area clean
Reports hazards and correct them
Sharpen drill bit
Drill holes with a drill press
Drill holes with a hand drill
Dress a grinding wheel
Check torque wrench for accuracy
Use outside micrometer “Standard”
Use outside micrometer “Metric”
Use inside micrometer “Standard”
Use inside micrometer “Metric”
Use depth micrometer “Standard”
Use depth micrometer “Metric”
Use dial indicator “Standard”
Use dial indicator “Metric”
Cut external threads with a die
Cut internal threads with a tap
Cut copper tubing & single flare
Double flare steel tubing
R & R two items that are interference fit together Ex: “gear on a shaft”
Use a tape measure

Shop Practices Tasks

Completed / Competency
Use a steel rule
Identify fasteners by strength, size and torque
Remove broken bolts by welding a nut on stud
Remove broken bolts by drilling – use easy out
Install pop rivet
Remove pop rivet
Use thread file and chasers
Install one thread insert
Install one helicoil

Page 1