VCC-9250P Architect & Engineer Specification

Bid Spec

1.0  Description

The colour video camera described shall be a Sanyo Model number VCC-9250P or equivalent. The Camera described shall be an industrial grade, high sensitivity, high-resolution colour Dome-shaped camera .

2.0  Bid Specifications

The camera shall incorporate an interline transfer method 1/3” charge coupled device (CCD) with approx. 470,000 picture elements (795Hx596V, 752Hx582V effective). The camera shall produce a picture with more than 450 lines of resolution and have a minimum light requirement of 3.5 lux with F1.8 lens (50 IRE) or approx. The camera shall have a video signal to noise ratio of more than 48dB. The video output level shall be 1.0Vp-p (75 ohms, composite) with a BNC type connection.

The camera shall have come with 360°endless panning and 95°tilt function.: When operated manually through the arrow keys, the camera will pan and tilt at variable speed while setting the sight of the desired location. When a preset position is input on the keypad or when an alarm signal is received, the camera will move horizontal direction and vertical direction.

The camera shall have x96 zoom function by the combination of x12 zoom optical zoom and x8

electronic zoom.

The camera shall have up to 255 positions (determined by the values for pan, tilt, zoom, and focus) peset positions, and can be registered for the camera.

The camera shall have programmed six preset positions sequential display function, and also available is Auto-pan watch, a sweeping motion between two preset positions on the same holizontal line.

The camera shall come with 8 alarm inputs. An alarm signal will set the camera to

automatically focus on the preset location corresponding to the alarm.

The colour video camera (up to 128 units) shall have controlled via RS485 (SSP protocol).

The camera shall not exceed a dimension of φ130x200(H) mm and weigh no more than 1.6 kg.

Power & Alarm receiving unit (included) shall not a dimension of 188.2 x 82 x 210(mm) and weight no more than 3.0kg.

Power requirements for the camera shall be 24V AC, 50hz and shall consume approx. 42W .

The camera shall feature solid state components to resist shock and vibration. The video camera shall be ISO9001 certified and CE listed.

3.0  Minimum Performance Specifications

Specifications
model / VCC-9250P
Scanning system / PAL Standard: 625 lines, 25 frames/sec.
Image device / Interline transfer method CCD
Image size / 1/3” (Approx. 4.8mm x 3.6mm)
Picture element / 795(H)x596(V):All picture elements
752(H)x582(V):Effective picture elements
Geometry / No Geometric Distortion
Synchronizing system / Internal sync/Line Lock sync switchable
Resolution / Horizontal: 450 TV lines
Vertical: 400 TV lines
Video output level / 1.0Vp-p(75W, composite)
Video S/N ratio / More than 48dB
Minimum Illumination / High: Approx. 3.5 lux at F1.8, 50 IRE
Electronic Shutter / 1/50, 1/120, 1/500, 1/500, 1/2000, 1/2000
Controlled by VSP-7000
White Balance / ATW/AWC
Backlight compensation / Center-zone light measuring system
ON/OFF controlled by VSP-7000
Zoom / Electronic:x8,Optical:x12
Rotation angle / Horizontally 360°endless, vertically +5 to -90°
Rotation Speed / Horizontally
Manual:approx.0.6°/sec(telephoto) to
approx.40 °/sec (wide angle)
Preset:240°/sec
Auto pan:approx.9°/sec
Vertical
Manual:approx.0.3°/sec(telephoto) to
approx.20 °/sec (wide angle)
Preset:120°/sec
Preset Position / 1～255
Lens Functions / Focus length: f=5.4 to 64.8 (mm) (x12 zoom)
Aperture ratio: F=1:1.8(wide angle) to 1:2.7(telephoto)
Iris Range:F1.8～F28
Picture angle: Horozontally 48.8°(wide angle) to
4.3°(telephoto)
Vertically 37.6°(wide angle) to
3.3°(telephoto)
Minimum distance:10mm(wide angle) to
800 mm(telephoto)
Communication method / RS485,operation via SSP
Communication speed(band rate) / 2400,4800,9600,19200bps
Address Setting / 1～127
Sockets / Video Signal : VIDEO OUT BNC Rear
SSP: RS-485(A,B) Pushbotton Terminal x2 Rear
Power Supply:24V AC Pushbotton Terminal x2 Rear
Environmental Conditions / Temperature: 0°C to 45°C (32°F to 113°F)
Humidity: Within 35% to 90% relative humidity
Size (WxHxD) / φ130x200mm
Weight / 1.6kg
Power & Alarm receiving unit (included)
AC 24 V input terminal / 2
AC 24 V output terminal / 1
RS-485 Band rate switch / Communication speed (2400,4800,9600,19200 bps)
Alarm Duration time(5 sec./30 sec.),Alarm list setting
Alarm Input terminal / No voltage, Make-contact switch input x8(Low input)
RS-485 Control terminal(DATA) / Pushbotton terminal x5(A,B,A,B,Ground)
Power consumption / 42W
Weight / Approx.3.0kg