Issue 35
Page 1 of 4
Application for BABT Certification under Annexes III and/or IV of the R&TTE Directive /
Section A:Contact Details
A. 1Main Contact Detail
Name of the main contact:
(Thisperson must be within the certificate holders organisational structure and must not be a consultant)
Title:
First Name: / Last Name:
Job Title and/or Department Reference
Company Name:
Address:
Postcode/Zip Code:
Country:
Telephone Number:
Fax Number:
E-Mail Address:
VAT Number:
(All UK and European Applicants must include their company VAT Number with the first application)
A. 2Other Contact Information
Normally all contact is directed through the main contact. If you wish to involve others for particular roles please advise
BABT with their contact details and relationship with the main contact.In particular please indicate below if you require any of the following and supply the supporting information.
A different Company name or address to appear on the certificate from that of the main contact
A Consultant to be involved {Copy of authorisation from applicant company must be provided on letterhead}
Section B:Your Certification Requirements
B. 1Type of Assessment
Please mark the type(s) of assessment required:
R&TTE Annex III Test Schedule
R&TTE Annex IV Article 3.1 (a) [Health & Safety]
R&TTE Annex IV Article 3.1 (b) [EMC]
R&TTE Annex IV Article 3.2 [Spectrum Usage]
R&TTE Annex IV Article 3.3 [Particular requirements]
B. 2Type of Application
Original
Modification / Where this is a Modification please identify the original Certificate number and provide brief details of modification in the TCF.
Original Certificate Number:
Section C:Product Details
C. 1Product(s) Submitted
Please enter the Product name(s), and model(s) of each product and the TCF document/file number.
Product Name(s) / Model(s)
TCF Overall Document File number (or the identity of the TCF Index):
C. 2Product Type
Please refer to Annex B of BABT 725 and select which product type most closely matches your product. We have listed the most popular types in a drop down box: If not included in the shortlist please complete the “Other” line:
Type of Product (Shortlist) / Choose an itemGSM/3G Cellular Phone2G GSM Cellular Phone3G WCDMA Cellular PhoneCDMA or Analogue Cellular PhoneBasestationGPS ReceiverMarine Radio EquipmentAir Traffic Management EquipmentSatellite EarthstationCordless TelephoneShort Range DeviceWireless LAN EquipmentGround Searching RadarOther
If Other (Please specify)
If you would like to append this with any brief additional Product Information (e.g. With Bluetooth) please complete the
following:Additional Information:
C. 3Radio Interfaces
Please indicate the following for each radio interface the apparatus is intended to use:
Type of Interface(i.e. EGSM900) / Frequency bands to be used(i.e. Tx/Rx Freq. Range)
Where the frequency is not harmonised the product is subject to the notification process. If you wish
BABT to progress the notification on your behalf please indicate. There is a separate fee for this service
C. 4Related Products
Please tick if applicable:
If your TCF covers more than one model, please explain the differences between products in a separate document
Where your product is an OEM (Brandname) of a product for which BABT have issued an opinion please provide details of any differences, and a letter from the holder of original product certificate listing their certificate number and permitting use of their results
Section D:Payment Details
Work is carried out on receipt of either payment in advance or a valid purchase order number. Clients applying directly to BABT (i.e. not through any other TÜV SÜD Group office), who do not currently have approved credit facilities with either BABT or TÜV SÜD Product Service UK must include a completed Credit Details Form with the application. Alternatively payment in advance is accepted. The appropriate forms may be downloaded from via the Fast Access Certification page.
Where you wish the invoice to be sent to a different person to the main contact please tick the box and provide the full details in supporting information
Where you wish to pay in advance please either provide details of your credit cardor indicate you wish to select this type of payment and to arrange for the payment. We regret that BABT do not accept Amex cards.
Where you select to use a purchase order please provide your company’s Purchase order number.
Section E:Agreement
The applicant named in A1 must complete this section:
I (We) hereby apply for a Certificate in relation to the specified product and agree to conform to the Certification Regulations; and
I(We) authorize BABT to discuss details related to this certification with the test facility, and consultant (where I/We have named one) identified in this application; and
I (We) declare that the Technical file supporting this application has been agreed by the manufacturer who
accepts the on-going responsibility for its maintenance ; and
I (We) declare that the specified product is* / is NOT the subject of an application under Directive 1999/5/EC Annex III or IV with another notified body acting in a similar capacity to BABT
* This notified Body is:
© TUV SUD BABT 2019 / BABT 500
Issue 35
Page 1 of 4
Signed for on behalf of the applicant
Authorised Signatory:
© TUV SUD BABT 2019 / BABT 500
Issue 35
Page 1 of 4
Title:
First Name:
Last Name:
Company Name:
Date:
Where the application form or notification of a change is signed by an authorised representative instead of a member of the applicant company a letter from the applicant company appointing them must be included with the request.
All work is undertaken under BABT’s standard terms & conditions and the specific conditions:
- Certificates only relate to the product and build level of that product identified in the certificate.
- Certificates are not transferable.
- Changes to the Holders name or address must be notified to BABT Customer Services in writing.
A copy of BABT’s standard terms & conditions can be found on our website.
This application form must be accompanied by the required information as detailed in BABT 725 ‘A Guide to the BABT Implementation of Annexes III and IV of the R&TTE Directive’
Please return your application to
TUV SUD BABT
Forsyth House
Churchfield Road
Walton-on-Thames
Surrey
KT12 2TD
UK
Tel: +44 (0) 1932 251200; Fax: +44 (0)1932 251201
E-Mail:
Website:
Note: References to BABT mean TUV SUD BABT.
© TUV SUD BABT 2019 / BABT 500
Issue 35
Page 1 of 4
Annex A: Information Provided within the TCF
Each TCF is unique accordingly there is no fixed structure or mandated set of contents. The following checklist identifies Information which is frequently required within a TCF. The use of this list is not mandatory but may assist in readily identifying required elements.
Including the following details / Provided / Identity
TCF Index: (Either a structured contents list or Index to the information within the TCF)
DESCRIPTION OF APPARATUS
Overview purpose of apparatus including Description, any Variants and any naming/revision differences within the TCF
Identification of Equipment including Model Numbers, brandnames and manufacturer details
Block Diagram with
All points of connection (inc Earthing)
Key Functions
Where not self evident details of interactions at ports
Circuit Diagrams
PCB Layout Diagrams
Parts List(s)
Data sheets for any Network/Radio/Safety critical components
Software/Firmware Versions
Photographs /Illustrations showing external features
PROCEDURES USED TO ENSURE CONFORMITY
Documentation describing compliance strategy including measures for externally supplied sub-assemblies
List of Standards applied
Justifications for:
using a standard which is not listed for the R&TTE
For using test data from a different standard
For omitting tests
TEST DATA
Test Reports broadly following guidelines of ISO/IEC 17025 Clause 5.10
Results of Design calculations
Test Methods where not included in Standards
Justification for Applying results to other variants
Justification for validity of results obtained prior to engineering changes
OTHER DOCUMENTATION
User/Installation/Special Instructions
In English
Include D of C (or reference)
Include regulatory information
Declaration of Conformity (may be draft)
Opinions of any other Notified Body