Electric Transmission Information Sheet: Appendix L
All Source Long-Term Request For Offers
Participants should supply the following information to allow PG&E to assess the transmission impact.
A. For new generators, with a current and completed SIS/FS PG&E will extract the interconnection and generator data from the System Impact Study/ Facility Study (SIS/FS). The interconnection and generator data required for SIS/FIS can be found in Appendices M and N of the PG&E Interconnection Handbook. The web links to all the references can be found under item D of this document.
B. For new generators that do not have a current and completed SIS/FS, please provide the following information, in the sequence requested:
1. Project Name:
2. Please state who will perform your SIS and FS study:
3. Proposed interconnection point (substation or transmission line with voltage level):
4. List the approximate distance from the project to the electric interconnection point:
5. Please identify your queue position on the CAISO queue. If not listed on the CAISO Queue, please identify the following the queue information:
a. Name of queue management organization:
b. position on queue (as of June 2008):
c. Size: Location: Substation:
6. Describe current land usage of the property required for the proposed project interconnection including any environmental concerns:
7. Does the project require use of any new or existing rights-of-way?
Yes No
If so, who will obtain these rights for the transmission interconnection, and have these rights been obtained:
8. Generator Characteristics
a. Number of generators in project and rated output and net output (MW) of each:
b. Interconnection voltage:
c. Other relevant characteristics (please specify):
9. Specify the proxy bus that will be used to determine the proxy costs for the project:
a. If the substation chosen from the transmission proxy report is not the nearest proxy bus from a geographical perspective, please explain why this is the approximate proxy busy.
C. For existing generators (QFs only), please provide the following information, in sequence requested:
a. Project Name:
b. Interconnection Point with existing PG&E grid:
i. Name:
ii. Address:
c. If the generator is currently interconnected with the transmission grid, please provide the applicable power generation agreement, power purchase agreement and/or interconnection agreement with PG&E.
d. Generator Characteristics:
i. Number of generators in the project and the rated output and the net output (MW) of each:
ii. Interconnection voltage:
iii. Other relevant characteristics (Please specify):
D. Generation Interconnection Web Links and References:
North American Electric Reliability Corporation (NERC)
§ Planning Standards and Operating Policies (NERC)
http://www.nerc.com/~filez/standards/Reliability_Standards.html
Western Electricity Coordinating Council (WECC)
§ WECC Reliability Criteria
http://www.wecc.biz/modules.php?op=modload&name=Downloads&file=index&req=viewdownloadcid=33
http://www.wecc.biz/modules.php?op=modload&name=Downloads&file=index&req=viewsdownload&sid=202
§ WECC information for Generators
http://www.wecc.biz/modules.php?op=modload&name=Downloads&file=index&req=viewdownload&cid=1
§ WECC Progress Report Policies and Procedures
http://www.wecc.biz/documents/library/publications/PCC/PCC_Handbook_Section_III.pdf (page III-78)
California ISO
§ New Generator Interconnection
http://www.caiso.com/docs/2002/06/11/2002061110300427214.html
§ Grid Planning Standards (Applicable Planning Criteria)
http://www.caiso.com/1c63/1c63de754c0a0.html
§ Grid Coordinated Planning Process
http://www.caiso.com/1bda/1bdab40d5960.html
PG&E
§ Interconnection Handbook
http://www.pge.com/about/rates/tariffbook/ferc/tih/
Wholesale Generator Interconnections
http://www.pge.com/b2b/energytransmissionstorage/wholesalegenerators/
All Source RFO: Revised 03-31-08 Page 3 of 3
Appendix M_ETInformationSheet.doc