Aluminum-Clad-Wood Windows and Patio Doors

SECTION 08 52 13.25

ALUMINUM-CLAD-WOOD WINDOWS AND PATIO DOORS

JELD-WEN EPICVUE Series

Display hidden notes to specifier. (Don't know how? Click Here)

** NOTE TO SPECIFIER ** JELD-WEN, Inc.; aluminum-clad-wood windows and patio doors.
This section is based on the products of JELD-WEN, Inc., which is located at:
2645 Silver Crescent Dr. Suite 400
Charlotte, NC 28273
Toll Free Tel: 800-535-3936
Tel: 541-850-2606
Fax: 541-851-4333
Email: request info ()
Web: www.jeld-wen.com
[ Click Here ] for additional information.
As a JELD-WEN customer, you can count on us to provide reliable products and service. We are a comprehensive source for dependable wood, vinyl and aluminum windows; wood and wood composite interior doors; and wood, steel, engineered wood and fiberglass exterior doors.

1 GENERAL

1.1 SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

1.1.1 Aluminum-Clad-Wood Windows and Patio Doors:

1.1.1.1 Awning windows.

1.1.1.2 Casement windows.

1.1.1.3 Radius and Geometric windows:

** NOTE TO SPECIFIER ** Direct Set windows are fixed. In-Sash windows are fixed or operable and come with hardware and screen options.

1.1.1.3.1 Direct-Set.

1.1.1.3.2 In-Sash.

1.1.1.4 In-Swing patio doors.

1.1.1.5 Out-Swing patio doors.

1.1.1.6 Sliding patio doors.

1.2 REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

1.2.1 Window and Door Manufacturers Association (WDMA):

1.2.1.1 AAMA/WDMA/CSA 101/I.S.2/A440 North American Fenestration Standard / Specification for windows, doors, and skylights (NAFS)

1.2.1.2 WDMA I.S.4; Industry Specification for Preservative Treatment for Millwork

1.2.2 National Fenestration Rating Council (NFRC):

1.2.2.1 NFRC 100 - Procedure for Determining Fenestration Product U-Factors.

1.2.2.2 NFRC 200 - Procedure for Determining Fenestration Product Solar Heat Gain Coefficient and Visible Transmittance at Normal Incidence.

1.3 SUBMITTALS

1.3.1 Submit under provisions of Section 01 30 00 - Administrative Requirements.

1.3.2 Product Data: Manufacturer's data sheets on each product to be used, including:

1.3.2.1 Preparation instructions and recommendations.

1.3.2.2 Storage and handling requirements and recommendations.

1.3.2.3 Installation methods.

1.3.3 Shop Drawings: Submit shop drawings indicating details of construction, flashings and relationship with adjacent construction.

** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.

1.3.4 Selection Samples: For each factory-finished product specified, two complete sets of color chips representing manufacturer's full range of available finishes.

1.3.5 Verification Samples: For each factory-finished product specified, two samples, minimum size 6 inches (150 mm) square, representing actual finishes.

1.3.6 Quality Assurance Submittals:

** NOTE TO SPECIFIER ** Delete Design Data, Test Reports submittal requirements when a propriety specification is used and can be held. Retain Design Data, Test Reports submittal requirement when other products may be submitted as substitution.

1.3.6.1 Design Data, Test Reports: Provide manufacturer test reports indicating product compliance with indicated requirements.

1.3.6.2 WDMA Hallmark certification

1.3.7 Closeout Submittals: Refer to Section 01 70 00 - Execution and Closeout Requirements.

1.4 QUALITY ASSURANCE

1.4.1 Installer Qualifications: Minimum 2 years installing similar assemblies.

1.4.2 Certifications: WDMA Hallmark certification label indicating assemblies meet the design requirements.

** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.

1.4.3 Mock-Up: Provide a mock-up for evaluation of installation techniques and workmanship.

1.4.3.1 Mock-ups shall incorporate surrounding construction, including wall assembly fasteners, flashing, and other related accessories installed in accordance with manufacturer's approved installation methods.

1.4.3.2 Do not proceed with remaining work until workmanship is approved by Architect.

1.4.3.3 Modify mock-up as required to produce acceptable work.

** NOTE TO SPECIFIER ** Delete one of the two following subparagraphs.

1.4.3.4 At Substantial Completion, approved mockups may become part of completed Work.

1.4.3.5 Demolish mockups and remove from site.

1.4.4 Pre-installation Meeting: Conduct pre-installation meeting on site two weeks prior to commencement of installation.

1.5 DELIVERY, STORAGE AND HANDLING

1.5.1 Deliver, store and handle materials and products in strict compliance with manufacturer's instructions and recommendations and industry standards.

1.5.2 Deliver and store assembly materials and components in manufacturer's original, unopened, undamaged containers with identification labels intact. Protect from damage.

1.6 PROJECT CONDITIONS

1.6.1 Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by Manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.

1.7 WARRANTY

1.7.1 Manufacturer's Standard Warranty: Assemblies will be free from defects in materials and workmanship from the date of manufacture for the time periods indicated below:

** NOTE TO SPECIFIER ** Delete product types not required.

1.7.1.1 Patio Door Units: 20 years.

1.7.1.2 Window Units: 20 years.

1.7.1.3 Clad Finishes: 20 years against peeling, checking, cracking caulk or color change.

1.7.1.4 Pine Wood Products: Lifetime against wood decay and termites.

** NOTE TO SPECIFIER ** Specialty glazing includes patterned and textured glass. Insulated glass that incorporates a specialty glass may be eligible for an extended warranty, but requires input from the manufacturer. Contact a JELD-WEN representative to discuss design options and their effect on the warranty. Delete glass types not required.

1.7.1.5 Glazing:

1.7.1.5.1 Insulated Glass: 20 years against seal breakage.

1.7.1.5.2 Laminated Glass: 5 years against delamination.

1.7.1.5.3 Specialty Glazing: 5 years against delamination.

2 PRODUCTS

** NOTE TO SPECIFIER ** Product information is proprietary to JELD-WEN. If additional products are required for competitive procurement, contact JELD-WEN for assistance in listing competitive products that may be available.

2.1 MANUFACTURERS

2.1.1 Acceptable Manufacturer: JELD-WEN, Inc., which is located at: 2645 Silver Crescent Dr. Suite 400; Charlotte, NC 28273 ; Toll Free Tel: 800-535-3936; Tel: 541-850-2606; Fax: 541-851-4333; Email: request info (); Web: www.jeld-wen.com

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

2.1.2 Substitutions: Not permitted.

2.1.3 Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements Product Requirements.

2.2 ALUMINUM-CLAD WOOD WINDOWS AND PATIO DOORS - GENERAL

2.2.1 Design Requirements:

2.2.1.1 Compliance: Provide assemblies capable of complying with requirements indicated, based on testing manufacturer's window that are representative of those specified.

** NOTE TO SPECIFIER ** The following subparagraph applies only to windows. Delete if not required.

2.2.1.2 Test Size: In compliance with requirements of ANSI/AAMA/NWWDA 101 I.S.2/NAFS.

** NOTE TO SPECIFIER ** Include patio door design pressure (DP) ratings as part of the performance requirements. Required DP will vary dependent on project site, the location in the building and door size. Coordinate DP with the Structural Engineer. DP ratings and related patio door size and style are available at www.jeld-wen.com or by contacting a JELD-WEN representative. Insert value or refer to drawing information.

2.2.1.3 Structural Requirements - Provide windows capable of complying with requirements indicated:

2.2.1.3.1 Performance Class: As indicated on drawings.

2.2.1.3.2 Performance Class: ______.

2.2.1.3.3 Performance Grade: As indicated on drawings.

2.2.1.3.4 Performance Grade: ______.

** NOTE TO SPECIFIER ** Include NFRC ratings as part of the performance requirements. NFRC ratings qualifying for the Energy Star program are based on the performance of whole assembly. Qualifying assemblies vary to fit the needs of different regions throughout the country. NFRC ratings and related JELD-WEN size and styles are available at www.jeld-wen.com or by contacting a JELD-WEN representative. Insert values or the phrase ' As scheduled and indicated on Drawings' as applicable. The following subparagraph applies only to windows. Delete if not required.

2.2.1.4 NFRC Requirements - Provide windows capable of complying with the following total window ratings:

2.2.1.4.1 U-Factor: ______in accordance with NFRC 100.

2.2.1.4.2 Solar Heat Gain Coefficient (SHGC): ______in accordance with NFRC 200.

2.2.1.4.3 Visible Transmittance (VT): ______in accordance with NFRC 200.

2.2.2 Installation Accessories:

** NOTE TO SPECIFIER ** Accessories compatible with windows, patio doors and required installation may be specified in this section or in related sections. Coordinate with related sections so as not to duplicate information.

2.2.2.1 Flashing: Refer to Section 07 60 00 (07600) - Flashing and Sheet Metal.

** NOTE TO SPECIFIER ** Delete options for sealants not required.

2.2.2.2 Sealants: OSI Sealants by Henkel Corporation.

2.2.2.3 Sealants: Refer to Section 07 92 00 Joint Sealants.

2.2.2.4 Sealants: Manufacturer recommended sealants to maintain watertight conditions.

2.2.3 Materials:

2.2.3.1 Exterior Cladding: Extruded aluminum.

2.2.3.2 Interior Wood:

** NOTE TO SPECIFIER ** Delete materials not required.

2.2.3.2.1 Material: As specified by Architect.

2.2.3.2.2 Material: Western Pine (Standard).

** NOTE TO SPECIFIER ** Optional. AuraLast is a trademarked preservative treatment by JELD-WEN and is distinguished from traditional preservation methods by its minimum treatment penetration of 92 percent.

2.2.3.2.3 Material: Genuine Mahogany.

2.2.3.2.4 Material: Vertical Grain Douglas Fir.

2.2.3.2.5 Material: Primed Western Pine.

2.2.4 Finishes:

** NOTE TO SPECIFIER ** Delete options for finishes not required.

2.2.4.1 Interior Finishes for Windows:

** NOTE TO SPECIFIER ** Delete finishes not required.

2.2.4.1.1 Finish: Unfinished (Standard).

2.2.4.1.2 Finish: Primed finish.

2.2.4.1.3 Finish: Pre-finished paint.

** NOTE TO SPECIFIER ** Delete colors not required.

2.2.4.1.3.1 Color: As selected by Architect.

2.2.4.1.3.2 Color: Brilliant White.

2.2.4.1.3.3 Color: Desert Sand.

2.2.4.1.3.4 Color: Ivory.

2.2.4.1.3.5 Color: Black Licorice.

2.2.4.1.3.6 Color: Steele Gray.

2.2.4.1.3.7 Color: Smoke.

2.2.4.1.4 Finish: Pre-finished stain finish.

** NOTE TO SPECIFIER ** Delete colors not required.

2.2.4.1.4.1 Color: As selected by Architect.

2.2.4.1.4.2 Color: Cider.

2.2.4.1.4.3 Color: Cordovan.

2.2.4.1.4.4 Color: Fruitwood.

2.2.4.1.4.5 Color: Walnut.

2.2.4.1.4.6 Color: Wheat.

2.2.4.1.4.7 Color: Warm Mocha.

2.2.4.1.5 Finish: Pre-finished clear lacquer finish

2.2.4.2 Exterior Finishes for Windows:

** NOTE TO SPECIFIER ** Delete finishes not required.

2.2.4.2.1 Finish: 0.050 inch (1.27 mm) thick extruded aluminum cladding with fluoropolymer, 3-Coat finish in accordance with AAMA #2605.

2.2.4.2.2 Finish: AAMA 2605 PVDF Standard Colors.

2.2.4.2.2.1 Color: As Selected by Architect:

2.2.4.2.2.2 Color: Brilliant White.

2.2.4.2.2.3 Color: Chestnut Bronze.

2.2.4.2.2.4 Color: Desert Sand.

2.2.4.2.2.5 Color: French Vanilla.

2.2.4.2.2.6 Color: Hartford Green.

2.2.4.2.2.7 Color: Mesa Red.

2.2.4.2.2.8 Color: Arctic Silver.

2.2.4.2.2.9 Color: Black Licorice.

2.2.4.2.2.10 Color: Dark Chocolate.

2.2.4.2.3 Finish: AAMA 2605 PVDF Colors.

2.2.4.2.3.1 Color: As selected by Architect.

2.2.4.2.3.2 Color: Hunter Green.

2.2.4.2.3.3 Color: Redwood.

2.2.4.2.3.4 Color: Heirloom White.

2.2.4.2.3.5 Color: Sage Brown.

2.2.4.2.3.6 Color: Smoke.

2.2.4.2.3.7 Color: Black Emerald.

2.2.4.2.3.8 Color: Bone White.

2.2.4.2.3.9 Color: Cascade.

2.2.4.2.3.10 Color: Dark Buckskin.

2.2.4.2.3.11 Color: Ivory.

2.2.4.2.3.12 Color: Luxury Bronze.

2.2.4.2.3.13 Color: Mocha Cream.

2.2.4.2.3.14 Color: Sea Foam.

2.2.4.2.3.15 Color: Steele Gray.

2.2.4.2.3.16 Color: Buckskin.

2.2.4.2.3.17 Color: Luxury Cambridge.

2.2.4.2.3.18 Color: Capri Blue.

2.2.4.2.3.19 Color: Luxury Champagne.

2.2.4.2.3.20 Color: Clover Mist.

2.2.4.2.3.21 Color: Dark Ivy.

2.2.4.2.3.22 Color: Deep Summer.

2.2.4.2.3.23 Color: Garnet.

2.2.4.2.3.24 Color: Haverstraw.

2.2.4.2.3.25 Color: Hudson Blue.

2.2.4.2.3.26 Color: Ivy.

2.2.4.2.3.27 Color: Liberty Blue.

2.2.4.2.3.28 Color: Mosaic Green.

2.2.4.2.3.29 Color: Pueblo Tan.

2.2.4.2.3.30 Color: Rosewood.

2.2.4.2.3.31 Color: Scarlett Haze.

2.2.4.2.3.32 Color: Teal.

2.2.4.2.3.33 Color: Wedgewood.

2.2.4.2.3.34 Color: Luxury White.

2.2.4.2.4 Finish: Anodized Finish.

2.2.4.2.4.1 Color: As selected by Architect.

2.2.4.2.4.2 Color: Clear Anodized.

2.2.4.2.4.3 Color: Luxury Champagne Anodized.

2.2.4.2.4.4 Color: Light Bronze Anodized.

2.2.4.2.4.5 Color: Medium Bronze Anodized.

2.2.4.2.4.6 Color: Dark Bronze Anodized.

2.2.4.2.4.7 Color: Extra-Dark Bronze Anodized.

2.2.4.2.4.8 Color: Black Anodized.

2.2.4.3 Interior Finishes for Patio Doors:

** NOTE TO SPECIFIER ** Delete finishes not required.

2.2.4.3.1 Finish: Unfinished (Standard).

2.2.4.3.2 Finish: Primed finish.

2.2.4.3.3 Finish: Pre-finished paint.

2.2.4.3.3.1 Color: As selected by Architect.

2.2.4.3.3.2 Color: Brilliant White.

2.2.4.3.3.3 Color: Desert Sand.

2.2.4.3.3.4 Color: Ivory.

2.2.4.3.3.5 Color: Black Licorice.

2.2.4.3.3.6 Color: Steele Gray.

2.2.4.3.3.7 Color: Smoke.

2.2.4.3.4 Finish: Pre-finished stain finish

** NOTE TO SPECIFIER ** Delete colors not required.

2.2.4.3.4.1 Color: As selected by Architect.

2.2.4.3.4.2 Color: Cider.

2.2.4.3.4.3 Color: Cordovan.

2.2.4.3.4.4 Color: Fruitwood.

2.2.4.3.4.5 Color: Walnut.

2.2.4.3.4.6 Color: Wheat.

2.2.4.3.4.7 Color: Warm Mocha.

2.2.4.3.5 Finish: Pre-finished clear lacquer finish.

2.2.4.4 Exterior Finishes for Patio Doors:

** NOTE TO SPECIFIER ** Standard. Delete finishes not required.

2.2.4.4.1 Finish: AAMA 2605 PVDF Colors.

2.2.4.4.1.1 Color: As Selected by Architect:

2.2.4.4.1.2 Color: Brilliant White.

2.2.4.4.1.3 Color: Chestnut Bronze.

2.2.4.4.1.4 Color: Desert Sand.

2.2.4.4.1.5 Color: French Vanilla.

2.2.4.4.1.6 Color: Hartford Green.

2.2.4.4.1.7 Color: Mesa Red.

2.2.4.4.1.8 Color: Arctic Silver.

2.2.4.4.1.9 Color: Black Licorice.

2.2.4.4.1.10 Color: Dark Chocolate.

** NOTE TO SPECIFIER ** Optional. Delete finishes not required.

2.2.4.4.2 Finish: AAMA 2605 PVDF Colors.

2.2.4.4.2.1 Color: As selected by Architect.

2.2.4.4.2.2 Color: Hunter Green.

2.2.4.4.2.3 Color: Redwood.

2.2.4.4.2.4 Color: Heirloom White.

2.2.4.4.2.5 Color: Sage Brown.

2.2.4.4.2.6 Color: Smoke.

2.2.4.4.2.7 Color: Black Emerald.

2.2.4.4.2.8 Color: Bone White.

2.2.4.4.2.9 Color: Cascade.

2.2.4.4.2.10 Color: Dark Buckskin.

2.2.4.4.2.11 Color: Ivory.

2.2.4.4.2.12 Color: Luxury Bronze.

2.2.4.4.2.13 Color: Mocha Cream.

2.2.4.4.2.14 Color: Sea Foam.

2.2.4.4.2.15 Color: Steele Gray.