All Rights Reserved by Ogemray

All rights reserved by Ogemray

1 / 7

1. Product Instruction

1.1Product Overview

Under using the current WiFi control technology, our company independently developed and launched T0104 smart lamp,The product meet the basic lighting need, it could also improve the user experience by timing switch, color adjustment and dynamic effect to increase life interest and enrich application scenarios.As for human interaction, the lamp could be controlled by not only mechanical switch and appbut also voice, all this will make the operation more intelligent and convenient.

1.2 Product Function

Support speech recognition and voice control.

Embedded WiFi module, we can configure the network one step intelligently by mobile APP.

APP Control, include Android and iOS version.

Color and Brightness control.

Lighting dynamic effect (stream/gradual/breathe/flashing).

Timer switch: set timer task(on/off) through APP, execute circle: every day or every week.

Set event reminder.

Support mechanical control buttons.

Intelligent protection, user could set the working time to turn off the light automatically.

Manual factory new.

Rechargeable battery included, support the lighting work 4 hours continuously.

2.Product description

2.1Parameters

Type / Parameters / Value
Product Information / Dimension(mm) / φ165*H153
Electrical Parameter / Rated voltage / DC5V
Rated current / 2000mA
Running Power / 7W
LED Power / 3.5W
Adapter / 5V/2A
IPDegree / IP20
Optical Parameters / Luminous Flux / Min:45; Typ:50; Max:55
Color temperature / 7000-8000K
CRI / Min:60；Typ:70；Max:80

2.2 Mechanical Structure Information

2.2.1 Product appearance

Voice Control Lamp T0104 product appearance(Front; Bottom).

2.2.2 Button Features

There is a physical button on the top of the lamp, function descriptions is as the following:

Short press the button to turn on or off the light.

Double click to conduct shortcut operation

Long press 10s to reset device, Restore to factory settings (WiFi module working in STA mode), The lighting turn red.

Long press 5s, The lamp will switch work mode between AP and STA mode.

When the lamp switched to AP mode, it will turn to green.

When the lamp switched to STA mode, it will turn to white.

2.3 Software Information

APP support : Android 4.0 and iOS6.0 or above.

2.3.1 Wi-FiConfiguration

WiFi network configuration for the lamp is convenient and rapid, mobile could be connected to the designated router quickly,the configuration process is generally less than 60 seconds.

Configuration process: Turn on the device, long press the color light switch 10s to factory new the light, the color light default to STA mode, and the light will turn red. Long press the color switch 5s to switchWiFi working mode between AP and STA.When the lamp switched to AP mode, the color light will turn to green.When the lamp switched to STA mode, the color light will turn to white.

2.3.2 Wi-FiWorkingMode

T0104WiFiworking mode: STA/AP mode.

If there is WiFi network in the usage scenario, the lamp can work in the two mode. If there is no WiFi network in the usage scenario, the lamp only could be used in AP mode.

Firstly user enter the SSID and password of router in themobile APP network configuration page,and broadcast via the router,T0104 defaults to STA mode,when the broadcast data from the router is received,the connection is started,if repeatedly failed to connect,user can switch to AP mode through the physical button,at this moment, mobile phone need to be connected with T0104 by AP mode,then mobile phone will send SSID and password of router to device, after received, then try to connect.

2.3.3 System start-up

T0104 will do the following things after start-up：

1. The lamp would be connected to router with stored parameters automatically, if could not connect to the specific router,T0104 will stay in STA mode, waiting to be configured.

2.The lighting will restore configuration parameters before it is powered off.

2.3.4 System Time

In order to ensure the accuracy of system time,T0104 will synchronize with the phone or the cloudautomatically, The timing execution function is based on thesystemtime synchronization.

2.3.5 Voice Control

Before control the lighting by the voice, user need to wake up the voice identification IC in the lighting, then the lamp could be controlled by the specific voice commands. We can conduct functions via voice like on/off control, brightness and color, effect changes. Adopting specific commands to ensure voice high recognition accuracy and reduce the rate of error identification. Now we support English and Chinese version.

User can choose open or close the voice control function. In consideration of complicated usage scenarios, voice recognition is easy to be jammed by external noise, we could set sleep mode for voice function to avoid this kinds of state. Under this mode, user needs to voice control two times to control the light. Users also could set time to turn on/off the sleep mode.

2.3.6 PWMDimming Control

The lamp is 4 ways controls with PWM, theduty ratio is adjustable and the hardware has been connected,users justcontrol the lighting app.

R/G/B/W channel output is PWM dimming control mode.

T0104can control 4 PWM at the same time,PWM is adjusted in the range of0%-100%,each PWM can be controlled individually, Each channel supports slow PWM regulation,which makes the lighting effect more milder and comfortable.

2.3.6 Timer Function

T0104 has precise system clock, accuracy can reach the second level. The module can support up to 8 timers, three execution modes can be set for each timer: asingle execution,weeklylooping execution,daily looping execution.

2.3.7 Local/Remote Control

T0104 support local and remote control, when control terminal isin the same LAN with T0104,control terminal will control the device by TCP/IP protocol, when control terminal is not in the same LAN with T0104, control terminal can send commands through cloud to control T0104,main control terminal can be mobile phone,IPad or other control terminal.

3.Using environment requirements

3.1Suitable temperature and humidity range :

Suitable work temperature ：-10℃-+50℃

Suitable storage temperature ：-20℃ -+85℃

Suitable working humidity ：20%-85%

Suitable storagehumidity：20%-85%

Note：In order to maintainthe service lifeof the product and ensure the performanceof the product, please use and store this product in strictly accordance with theenvironmental requirements.

4.Product Update

T0104 protocol has good openness,there is no limit to the mobile platform,APP supportsAndroid 4.0 and iOS 6.0orabove.

T0104 supports wireless upgrade,When you need to update the device software,the cloud will push the message to APP to notify the user,Users can select to upgrade,After the upgrade operation is started,The system will complete the upgradeautomatically,no operation is required for users,Please do not turn off the lamp within the upgrade process.

5.Disclaimer

This specification is a detailed description of series productsproduced by the company,Please read carefully and fully understand the detailed specification parameters of the product.

All rights reserved by Ogemray,without permission of our company, The company donot allow to totally or partly copy, translate or simplify this specification for any other usage.

We do not provide any guarantees for the product information,parameters,photos or other links in the specification, users bear the risks.

we declare thatthis specification or otherrelevant information without any implied warranties of business assurance or business contract assurance. All information inside is only for operation,product user manual or reference,it can’t be regardedas a basis or complement for any other contract.

We have made reasonable efforts to make this document content accurate and up-to-date.

but our company reserves the right to update or revise the content and its related information at any time without additional notice.

1 / 7