Alexander de Leon Magpayo

City Address: B60 L58 Mabuhay City Mamatid Cabuyao Laguna Philippines

ROAMING NUMBER+63-9281722354

Provincial Address: San Pedro Sasmuan Pampanga Philippines

E-mail address:

PROFILE

Experienced in GUIDEWIRES MEDICAL devices, conducting failure analysis and reliability test of semiconductor devices such as Triac, SCR, SAW Filter, SOT23/25/26 or power devices andtroubleshooting electro-mechanical equipment and had experienced in parts and components for hub and bracket of spindle motor. Also, analyzed defect or conduct failure analysis and reliability testing of Flexible Printed Circuits. Acquired substantial educational and training background in the field of expertise. Hard working, reliable, and highly productive, proving ability to deliver high quality work and excellent customer satisfaction.

PROFESSIONAL EXPERIENCE

Salalah Medical Device and Manufacturing Company

- Salalah Oman

- Product: GUIDEWIRES

Position: QA Engineer - August 10, 2009– September 22, 2011

JOB DESCRIPTION

-Establish and define Standards and Procedure of development requirements of the product.

-Formulate, implement and review work procedures to ensure effectiveness and efficiency to meet quality requirements.

-Review the verification & validation of medical device development and product evaluation according to ISO and FDA requirements and actively provide constructive feedback to development team.

-Participate in risk and hazard assessment during design & development of the product.

-Establish and maintain high quality test procedures and methods to be used in present and future software and hardware testing and development that comply with the company quality standards and deliverables.

-Work with Contract Manufacturer to specify & qualify the reliability’s and testing’s requirements for components and / or assembled parts of the incoming inspections.

-Oversee quality tests and qualify the release of products at the manufacturing side.

-Coordinate with contract manufacturer(s) on the quality trends, including the corrective and preventive actions.

-Calibrate Measurement and Test Equipment (M&TE) such as manometer, calipers, micrometers, etc.,

-Troubleshoot and perform minor repairs of instrumentation.

-Review calibration data and complete calibration certificates ensuring accuracy of calibration, dates, and completeness.

-Communicate instrumentation problems and coordinate calibration activities with user / management.

-Maintain accurate, current M&TE procedures and documentation and enter calibration data.

-Assisting Regulatory Manager with monthly reports and data collection activities.

-Ensure the proper maintenance of document control processes and devices.

First Sumiden Circuits Incorporated

- LISP Cabuyao Laguna Philippines

- Product: Flexible Printed Circuit

-QA Failure Analyst 04/18/04 – 12/28/07

JOB DESCRIPTION

  • Technical support to QA and Process Engineering Group by performing Reliability Test according to established in – house and customer requirement.
  • Writes specifications and procedures for Reliability Section.
  • Recommends changes or improvements to documentation, inspection methods and other related criteria.
  • Analyzes problems and failures to determine root cause of failure mode of all products.
  • Performs Reliability Test and Failure Analysis.
  • Prepare and submit weekly progress and accomplishment report to the immediate superior.
  • Gathering of datas, determination of the factors leading to the problem.
  • Analyzation and evaluation of each possible root cause.
  • Recommend system/procedure based on the results during evaluation for the improvement of the current process.
  • Keep his superior informed and his subordinates updated and well directed of the developments in his area of responsibility.
  • Conduct Calibration Test.

Nidec Philippines Corporation

- Laguna Technopark Binan Laguna Philippines

Product: Spindle Motor of Hard Disk Drive

- Lathe Process Engineer 04/10/03 – 06/11/03

Basic Function

The basic function of Process Engineer is to provide support in the Lathe Production line. He is responsible for the analysis of defects and the evaluation and standardization of countermeasures.

Should ensure that his line achieves the target by following established SOP and procedures.

Must monitor correction of any problems in the line especially in regards to quality.

Must be aware at all times, his lines quality and production performance through coordination with the Line Leader, In-Line Inspector or Maintenance, Technician, Production Supervisor, line Engineer and Correction Group.

Must continue to improve his group’s quality and production efficiency.

Must report all problems encountered together with the corrective action done and proposed preventive action to Manager.

Must ensure that corrective action done was proper and effective and standardized such action into the Lathe operations through changing/modifying of SOP’s and procedures. Must take the in the improvement of our groups working environment.

Principal Accountabilities:

Daily Monitoring of top scrap or discrepancy contribution per model to provide basis for problem identification.

Gathering of datas, determination of the factors leading to the problem.

Analyzation and evaluation of each possible root cause.

Implementation of corrective action and monitoring of its result.

Recommend system/procedure based on the results during evaluation for the improvement of the current process.

Monitor implementation of approved countermeasures and instruction to other support groups at the production line.

Prepare and submit weekly progress and accomplishment report.

Participate in quality meeting to be aware on any instruction and countermeasures to be implemented at the production line.

Keep his superior informed and his subordinates updated and well directed of the developments in his area of responsibility.

Review standards and conduct process line audit and notify concern persons regarding non-conformity to be found.

Fastech Electronique Inc.

- LISP Cabuyao Laguna Philippines

Product: Power Device

- QA Failure Analyst and ReliabilityJunior Engineer 01/10/99-03/15/02

JOB DESCRIPTION

  • Provides technical support to QA and Process Engineering Group by performing Failure Analysis and Reliability Test according to established in – house and customer requirement.
  • Writes specifications and procedures for the Failure Analysis and Reliability Section.
  • Provides tests results regularly.
  • Recommends changes or improvements to documentation, inspection methods and other related criteria.
  • Conducts quality selection for the qualification of new devices, process changes and raw materials.
  • Performs test product/ component qualification for new device.
  • Troubleshoots machine, identify and analyzes problems and failures to determine root cause of failure mode of all products.
  • Replaces defective parts and components.
  • Performs Failure Analysis on Test Engineering evaluation for yield improvement.
  • Provides Failure Analysis Laboratory Support, conduct minor repairs and preventive maintenance.
  • Performs troubleshooting to ensures good quality and performance of the electrical and electronics equipment, and ensures that it conforms to the specifications of the clients.
  • Prepare and submit weekly progress and accomplishment report to the immediate superior and customer.
  • Sets up and runs test equipment to evaluate the performance and reliability of each equipment and its components.
  • Review standards and conduct process line audit and notify concern persons regarding non-conformity to be found.
  • Gathering of datas, determination of the factors leading to the problem.
  • Analyzation and evaluation of each possible root cause.
  • Implementation of corrective action and monitoring of its result.
  • Recommend system/procedure based on the results during evaluation for the improvement of the current process.
  • Monitor implementation of approved countermeasures and instruction to other support groups at the production line.
  • Participate in quality meeting to be aware on any instruction and countermeasures to be implemented at the production line.
  • Keep his superior informed and his subordinates updated and well directed of the developments in his area of responsibility.
  • Makes recommendations as may be warranted and adjustment, repairs and making procedures to be undertaken in cases of defects and abnormalities.
  • Review standards and conduct process line audit and notify concern persons regarding non-conformity to be found.

MACHINE USED:

  • X-Ray Machine (FEIN Focus)
  • SONIX (Scanning Acoustic Microscopic)
  • Hirayama (PCT- Machine)
  • TS 130 WEISS (TCT- Machine)
  • Programmable Curve Tracer
  • Auto Decapsulator (PS 101)
  • High Power Microscope (Olympus BX 60M)
  • Tesec Test System
  • Comparator
  • SEM / EDX – S-3000N / Rontec
  • Quickscope Mitutoyo – XYZ Measuring Scope
  • Microfine Measuring Instruments
  • Liquilaz and Rion for Liquid Particle Analysis
  • Peel Strength Tester (IMADA)
  • Ion Chromatograph (DIONEX)
  • Temperature and Humidity Chamber (ozone)
  • Grinder and Polisher (Topper)
  • Crack Test and Bond Strength Test (West Bond)
  • Endurance Tester ( MIT-D)
  • CMM – have knowledge on application.
  • HANDYSURF E-35A/B – roughness tester on plating surface.

Reliability and Failure Analysis Tests Performed:

  • Temperature Cycle Test
  • Pressure Cooker Test
  • Solderability Test
  • Resistance to Solvent Test
  • Resistance to Soldering Heat Test
  • High Temperature Storage Life Test
  • Dimensional Test
  • Crater Test
  • Die Metallization Etching
  • Bake Test
  • IR – Reflow Test
  • High Temperature Humidity Chamber
  • Liquid Particle Analysis Test
  • Hard Particle Analysis
  • Airborne Particle Analysis
  • Grinding, Plane Section and Polishing Test
  • Peel Strength Test
  • Quantitative and Qualitative Analysis Test (EDX)
  • Topographical Analysis Test (SEM)
  • Ion Chromotographical Analysis Test
  • Wire bonding and Crack Test for gold plating.
  • Endurance Test
  • Tensile Test
  • Flexibility Test
  • Three Point Bent Test

Calibration Test Instruments Performed:

  • Temperature Controller (omron)
  • PH level meter
  • TDS Controller
  • Steel Rule
  • TENSILE Machine
  • Flexibility Tester
  • Pressure Gauge
  • Digimatic Caliper
  • Micrometer
  • Caliper
  • Hygometer
  • Weighing Eqquipment

Seminar Attended

  • Statistical Process Control

Fastech Electronique Inc.

  • 7-QC Tools

Fastech Electronique Inc.

  • FMEA

Fastech Electronique Inc.

  • 8D

Fastech Electronique Inc.

  • QIT (Presentation of Six Sigma Project)

ASEMEP - Westin Philippine Plaza Hotel Manila.

  • Failure Analysis and Reliability Concepts

SEIPI / ASEMEP / ARCDI – Northgate Cyberzone, AlabangMuntinlupaCity.

  • Ultimate Scanning Electron Microscopic for the Millennium from HITACHI

SIGMATECH – BellevueAlabangMuntinlupaCity.

  • Industrial Calibration / Uncertainty of Measurement

Lab Industries Testing and Calibration Laboratory – Los Banos Laguna.

  • Sterilization of Medical Devices by ETO – ISO 11135

SGS – Salalah Medical Device and Manufacturing Company

  • Medical Devices Risk Management System 14971:2001

SGS – Salalah Medical Device and Manufacturing Company

  • Technical Documentation under Medical Device Directive 93/42/EEC

SGS – Salalah Medical Device and Manufacturing Company

Organization

Institute of Electronics and Communications Engineer of the Phils., Inc.

(IECEP-member)

Skills

Computer Literate (MS-Office and MINITAB) / Have knowledge in DMAIC Principles.

EDUCATION

1993-1998 Adamson University

Bachelor of Science in Electronics and Communication Engineering

Birthday:May 13, 1976

Sex: Male

References

Lino Lopez

Engineering Manager

First Sumiden Circuits Inc.

Juvy Zacarias

QA Manager

First Sumiden Circuits Inc.

Mildred Hechanova

QA Manager

Salalah Medical Device Manufacturing Company

Alexander L. Magpayo

Applicant