About the luminous wheel hub cover:

Luminous wheel hub cover, is an innovative dedicated wheel hub decorated cover, which is used on the center of the car's wheel hub. When the vehicle's speed reaches at 35km/hr(22miles/hr)), the wheel cover can be magnetic induction to light up to give warning signal to the other driving vehicles. It will reduces collision between your car and the parallel or vehicles(especially at night).And make your driving safer!The decorative cover will never need batteries, it is LED lighting, energy saving and environmental. The cover work as well as normal weather at raining days for using high-sealing waterproof technology.

Luminous wheel hub cover, with good technology, maintain the emblem on the wheel hub of the vehicle in driving speed of 135km/hr(85miles/hr) upright still. It brings a touch of beauty and character and brand prominence!

Notes and Warranty:

1．The luminous wheel cover use high sealing waterproof technology, with a better dust-proof function. If the cover rotates together at low speed for driving at mud road or dust accumulation, rinse it with clean water.

2．When the light is too bright in daytime, the luminous wheel hub cover may be not so obvious due to the effect of daytime strong light.

3．The luminous wheel hub cover's bracket is made of ABS + PC, with good hardness and toughness, can firmly tighten the hub. Please be carefully examine the bracket and buckle before installation. If find out any crack on the buckle, please do not install, and contact with the manufacturer for replacement.

4．This product's warranty(non-human factor)is 12 months. Any malfunction and damage of the product and its effect caused by customer's improper operation is on customer's duty; Any malfunction and damage caused by natural disasters is out of the warranty. Please keep this manual and warranty card well, and show them while asking for warranty.

luminous wheel hub cover installation instructions

Thank you very much for choosing the luminous wheel hub cover, Please read this manual carefully before using the product, and install it according to the installation method and order. It is recommended that the product be installed by a professional in service shop.

Warning lightBracket

Emblem suspension Buckle

Product Name / Luminous wheel hub cover
Applicable models
Product accessories / Luminous wheel hub cover / Quantity / 4 pc /set

Installation method and order:

1 Installation Preparation:

Prepare a small straight screwdriver. Point the head of the screwdriver to the original wheel hub cover's gap, gently tilt it out, and then clean the wheel hub installation hole clearly.

2 The Installation Process of the luminous wheel hub cover：

Open the package and take the wheel hub cover out, check if the product buckle is abnormal, rotate the work light. If no abnormalities, then aim the product at the wheel hubhole, use palm to press the product into the hole (pictured above).The product will be installed perfectly with a pa sound, which indicates that the product firmly hold the wheel hub slot and installed successfully.

3 Examinationafter installationcompleted:

After the luminous wheel decoration cover is installed, check whether the edge of the decorative cover fit well with the edge of the wheel hub, and then rotate the LOGO surface to check if the internal LED light up.

General fault handling：

Fault phenomenon / Fault cause / Eliminating methods
The emblem rotate together with the car wheel in normal situation / Dust accumulation / Rinse with water