Page 1

A big hand for compact testers

Rugged enough to withstand the toughest of on-site environments, Megger’s new MIT400 series insulation testers are compact enough to allow easy one-handed operation with either hand. They also fully meet the requirements for Cat IV 600V applications, as defined by IEC61010, ensuring safe operation in all normal electrical, service, maintenance and utility applications

In addition to versatile insulation testing facilities, all models in the MIT400 range offer timesaving fast-response continuity testing and true RMS voltage measurement that provides accurate results even when the supply waveform is non-sinusoidal.

Designed to be quick and simple to use, all models also feature a useful dual digital display plus an analogue arc

The display shows the main parameter being measured – for example, insulation resistance – in both digital and as an analogue arc, while the smaller secondary display shows a related parameter – for example, insulation test voltage – as a digital value. Users therefore save valuable time by measuring two parameters with a single test.

For general applications, Megger offers the new MIT400 tester in four versions.

The entry level MIT400 provides insulation testing at 250V, 500V and 1000V, together with continuity testing and voltage measurement. The MIT410 adds 50V and 100V insulation tests, as well as fully automatic measurement of dielectric absorption (DAR) and polarisation index (PI), while the MIT420 provides all of the facilities of the MIT420 plus internal storage for test results. Stored results can subsequently be recalled to the screen to allow easy recording.

At the top of the range is the versatile MIT430, which not only stores test results but also allows them to be transferred to a PC via a Bluetooth wireless connection. This arrangement completely eliminates the need for data cables, and also guarantees total electrical isolation between the instrument and the PC to which the data is being transferred.

In addition to the models for general applications, Megger’s new MIT400 range includes a low-voltage model, the MIT40X, with a selectable Insulation test voltage from 10V up to 100V, and three further models which are optimised for use in telecommunications applications.

All Megger MIT400-series instruments have a removable rubber over-moulding for added resilience, and all are supplied in the form of a kit, complete with test leads and a strong moulded carrying case. For added convenience and ease of use, the instruments can be stored in the case without disconnecting the test leads.

Ends - 380 words

For further information contact:

Mark Johnson, Megger

Archcliffe Road, Dover, Kent, CT17 9EN

Telephone: +44 (0) 1304 502101 Fax: +44 (0) 1304 502307

e-mail:ww:

Press enquiries:

Geraldine Cordeiro

Houston Associates PR Ltd, Media House,

181-185 Kirkdale, London, SE26 4QH

Telephone: +44 (0) 20 8778 1900

Fax: +44 (0) 20 8659 9191

e-mail:

www:

Ref: MEG000/0206/TS4

more...