EAST
2018
UNLOADER TRAILER
061424 - 061438
BODY SPECIFICATIONS
WIDTH: 102"
LENGTH: 48"
HEIGHT: 100”
SIDE MATERIAL (Outboard): 3/16” S & P
TOP RAIL: Unloader
ROOF: None
ROOF MAT’L: None
BULKHEAD 3/16" (1)
TARP HOOK: None
TARP BASKET: None
TARP: None
CATWALK: Yes
B.H. LADDER: Rung – D/S
CROSSMEMBER: “I” Beam -12” C/L
FLOOR MAKE: Keith (2)
FLOOR MATERIAL: TBD
WEAR PADS: TBD
HORZONTALS: NONE
45 DIRT SHEDDERS 8” Smooth
TARP BAR: Yes
TAPE COLOR: Blue
LIGHT PANEL: In Tailgate LED
MARKER LIGHTS: Note (3)
MIDMOUNT SIGNALS: Yes LED
MUDFLAPS: Yes
HOSE HANGER: Yes
TIRE CARRIER: None
TAILGATE
HEIGHT: Full
TYPE: Single
STYLE: Sheet & Post
MATERIAL THICKNESS: 3/16”
S/S HINGE ON: P/S 4-3-4
GATESEAL: None
GATE LADDER: Cast / Center
TARP HOOKS: None
WINDERS: One
GATE GUIDE: Yes
GATE CONTROL: Mechanical
POCKETS: Fabbed / Extruded
CROSS PIPE(S): Two - Tube Type
HYDRAULICS:
HOSES: Two – 4000 PSI
LENGTH: 144”
FITTINGS: Push-Pull
HP: 1” Male
LP: 1” Female
CHASSIS:
MODEL: Tandem
TYPE: Aluminum sub frame
AXLE-TO-AXLE: 49
REAR AXLE SETTING: 26-1/2”
5TH WHEEL HEIGHT: 49"
PIN SETTING: 36”
SUSPENSION: Reyco 21B
SPRINGS: Single Leaf
AXLES: TP Spindles, (4)
BRAKES: 16 ½” x 7”
DUST SHIELDS: Yes
BRAKE CHAMBERS: Top of Axle
ABS: 4S / 2M
HUBS: 10 S Steel/Cast
PIL – East Elite
WHEELS: 8.25 x 24.5
Steel Disc
TIRES: 11R 24.5 R250ED 16 Ply
DOLLIES: 2 SPD Holland Mark V
LOCATION: D/S Crank
BUMPER: Steel
TOW HOOKS: Two
PUSH BLOCKS: Yes
PAINT: Silver
REMARKS:
1. Add acess hole for future access to steel hydraulic lines.
2. Install sub deck only. Hale to install steel hydraulic lines, drive unity and floor slats.
3. 3 PR top and bottom, all LED all boxed in. Make sure to install rubber grommets everywhere wire passes through aluminum.
3. GAWR to be #23,000 for New York “R” Permit 46,000#.
Empty Weight: 17,129 Overall height (ft.) 12.92 Cubic Yards 115
Disclaimer
Specifications are believed to be correct, but may contain errors and/or omissions. Photographs are representative of the subject equipment, but may not be identical. Equipment availability, prices and specifications are subject to change without notice.
1