TENSOR MARKETING LTD SAFETY DATA SHEET

REVISION: 1 According to 1907/2006/EC, Article 31

Revision Date: 13-06-2011 Page 1 of 3

MOULD & MILDEW GENIE

1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND THE COMPANY

Product name Mould & Mildew Genie

Company Tensor Marketing Ltd

Yarm Road Business Park

Darlington

DL1 4XX

United Kingdom

www.goodideas.uk.com

Telephone 01325 469181

Fax 01325 381386

Emergency telephone number 01325 469181 (Office hours only 09.00am – 17.30pm)

Intended use Automotive cleaning product.

2. HAZARDS IDENTIFICATION

Main hazards Causes Burns. Contact with acids liberates toxic fumes.

3. COMPOSITION / INFORMATION ON INGREDIENTS

Hazardous ingredients

Component / Conc. / CAS / EINECS / Symbols/Risk
Sodium Hypochlorite / 1-10% / 7681-52-9 / 231-668-3 / C; R34, R31 N; R50
Sodium Hydroxide / 1-10% / 1310-73-2 / 215-185-5 / C; R35
4. FIRST AID MEASURES

Inhalation Move injured person into fresh air and keep person calm under observation. If necessary,

seek hospital and bring these instructions.

Ingestion Immediately rinse mouth and provide fresh air. Get medical attention. Do not induce

vomiting. NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRINK FLUIDS!

Skin Contact Remove contaminated clothes and rinse skin thoroughly with water. Get medical attention if

irritation persists after washing.

Eye Contact Promptly wash eyes with plenty of water while lifting the eye lids. Continue to rinse for at

least 15 minutes and get medical attention.

5. FIRE FIGHTING MEASURES

Extinguishing media Carbon dioxide (CO2), Dry chemical, Foam, water fog.

Fire hazards This product is non-combustible. If heated toxic vapours may be formed (Chlorine)

Protective equipment Self-contained breathing apparatus and full protective clothing must be worn in case of fire.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions Ensure adequate ventilation of the working area. Wear suitable

protective equipment.

Environmental precautions Do not allow product to enter drains. Prevent further spillage if safe.

Clean up methods Absorb with inert, absorbent material. Sweep up. Transfer to suitable, labeled

containers for disposal. Clean spillage area thoroughly with plenty of water.

7. HANDLING AND STORAGE

Handling Avoid contact with eyes and skin. Ensure adequate ventilation of the working area.

Adopt best Manual Handling considerations when handling, carrying and dispensing.

Storage Keep containers tightly closed. Store in correctly labelled containers.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Exposure Limits Sodium Hydroxide

WEL 15 min limit mg/m3: 2.0

Engineering measures Ensure adequate ventilation of the working area.

Hand protection Chemical resistant gloves (PVC)

Eye protection Use approved safety eyewear where splashing is probable

9. PHYSICAL AND CHEMICAL PROPERTIES

Description Liquid.

Colour Clear, pale yellow.

Odour Chlorine

pH 12 - 14

Relative density 1.07 +/- 0.02

10. STABILITY AND REACTIVITY

Stability Stable under normal conditions.

Conditions to Avoid Avoid contact with acids.

11. TOXICOLOGICAL INFORMATION

Inhalation May cause irritation to the respiratory system.

Ingestion Irritating. May cause nausea, stomach pain and vomiting.

Skin Contact Irritating to skin.

Eye Contact Irritating to eyes.

12. ECOLOGICAL INFORMATION

Ecotoxicity The product is not expected to be hazardous to the environment.

Mobility The product is soluble in water.

13. DISPOSAL CONSIDERATIONS

General information Dispose of in compliance with all local and national regulations.

14. TRANSPORT INFORMATION

Normally packaged in limited quantities for ADR/RID/IMDG

UK ROAD CLASS 8

PROPER SHIPPING NAME HYPOCHLORITE SOLUTION

UN NO. 1791 ADR PACK GROUP III

ADR CLASS NO. 8 HAZARD No. (ADR) 80

15. REGULATORY INFORMATION

Labelling The product is classified in accordance with 67/548/EEC.

Symbols C - CORROSIVE

Risk phrases R34 – Causes Burns.

R31 – Contact with acids liberates toxic gas.

Safety phrases S1/2 - Keep locked up and out of the reach of children.

S13 - Keep away from food, drink and animal feedingstuffs.

S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical

advice.

S28 - After contact with skin, wash immediately with plenty of water.

S36/37/39 - Wear suitable protective clothing, gloves and face protection.

S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)

S46 - If swallowed, seek medical advice immediately and show this container or label.

16. OTHER INFORMATION

Text of risk phrases in Section 3

R22 - Harmful if swallowed.

R31 - Contact with acids liberates toxic gas.

R35 - Causes severe burns.

R36 - Irritating to eyes.

R50 - Very toxic to aquatic organisms.

Further information

The information supplied in this Safety Data Sheet is designed only as guidance for the safe use, storage and handling of the product. This information is correct to the best of our knowledge and belief at the date of publication however no guarantee is made to its accuracy. This information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any other process.