Release Notes: Canvas Extension
Version 4.2.38 (April 1, 2014)
Canvas: Added new textures for painted wood surfaces.
Canvas: Crashed fix on Material Legends caused from using inside of blocks.
Canvas: Fixed a crash with the reconfig tool when loading drawings.
Canvas: Updated Materials Swatches
Compose: Fixed the part number on Compose Benching Spanning Support Panels.
Compose: Spanning End Panel no longer attaches to front of worksurfaces.
Drawer Inserts: Fixed a crash when opening the drawer inserts window.
Enclose / Enclose Frameless Glass: Doors no longer forget certain pull choices.
Enclose: Stack-ons should now split into separate BOM items when appropriate.
Enclose: The General Electric Notes legend has been cleaned up.
Masters Series: Updated graphics for bookshelf with back option.
Orlando: VSU now auto adjusts to valid layout width configurations unless snapping, which has a validation check added in.
Panel & Worksurface Accessories: Added real time lighting to storage box.
Panel & Worksurface Accessories: Fixed a crash when an accessory isn't connected to a panel.
Patterns: Fixed a crash involving the suspended shelf.
Patterns: Fixed the Patterns reference manual link to the correct location.
Places: Fixed part numbers when using powered panels.
Premise: Fixed a crash in Wing Walls when placing on worksurfaces.
RACE: Added additional depth options for Mini Beam Transition.
Reside: Fixed support structure on Bent/Bent Return worksurface so that bringing in a new one will look correct.
Reside: Stanchion kits can now be placed on the right side of worksurfaces.
Screens: Prevented stretch pulling attached worksurfaces
Seating: Added Cal. 133 and Nano-Tex options to Lively Task chairs.
Systems: Single wall track button added.
Walls: Added an undecided ceiling type.
Worksurfaces: Auto-placed Cantilevers appear in correct positions.
Worksurfaces: Fixed center cantilever sticking around after the worksurface has detached from a panel.
X Series: Products no longer snap to wall track.
Version 4.2.31 (March 3, 2014)
Belong: Power tap, flush mount plate, and wall mount bracket will show part number when not connected to Beside storage or Reside worksurface.
Belong: Panel attached tool rail will no longer jump to the top of the panel.
Belong: Structural L Screen now has stretch points.
Beside: Fixed a crash in the storage top when you disconnect it from the base unit while it's also connected to a desk to storage bracket.
Canvas: Limiting Finish summary by Reconfiguration Tags added
Canvas: Fixed the transparency on the Frosted Acrylic glass material.
Canvas: Change Tile Material tool can now also change type and edges if applicable.
Canvas: Added more fields to SIF export for compatibility with ProjectMatrix.
Canvas: Panel Type Elevations now broken out by Product Line
Canvas: Text formatting for postcap & trim legends should match other legends
Canvas: Fixed a routing issue when you had doors and multiple electrical paths and not routing to all of them.
Canvas: Descriptions for UNDECIDED materials are now red in the Finish Summary.
Canvas: Links to Reference manuals have been updated, with additions to X-Series and Seating, as well as changes to the actual Enclose/EFG manual.
Canvas: Fixed the panel type reports from crashing.
Canvas: Fixed the crash when previewing Panel Type Reports.
Compose: Fixed receptacle animation to provide the correct technology tile when placing new receptacles on a non-technology tile.
Compose: Fixed the panel tags to show the correct power type when using raceway or beltline power.
Compose: Glass stack material for glass and frame can be applied through material animation.
Compose: Fixed Benching panels from preventing worksurfaces to attach while using Glass Toppers.
Compose: Added glass topper insert material scheme option to scheme manager and fixed more glass satin etched materials.
Enclose / Enclose Frameless Glass: The Door Manager now has an option for swing door plinth, and does not lose handing value.
Enclose / Enclose Frameless Glass: Endcaps for Change Of Height conditions have had their graphics corrected, and a validation warning has been added for conditions where the height change is too small for an endcap.
Enclose/Enclose Frameless Glass: Detail bubbles should no longer go missing on inline connections.
Enclose/Enclose Frameless Glass: BEST latchsets are only available with STD core. Interchangeable option removed and existing drawings mapped to Standard.
Enclose: Added an invalidation for when a double box electrical device conflicts with the SAE lockbar of a perpindicular sliding door (and also, electrical location validation messages should now be more specific).
Enclose: US Health Care electrical location now shows up in the Project Electrical Requirements Legend as such.
Enclose: Minimum frame width for two-sided Power Base PDA application has changed to 914.4mm.
Enclose: Glass Panels with Glass Stack-On Panel should no longer display an incorrect base panel height in the Panel Type Report.
Enclose: Stack-on Panels now appear the same width as the panel below them in Panel Type Reports and Panel Type Elevations, and Solid Stack-Ons now appear solid during placement.
Enclose: Change-of-height End-of-runs (vertical trim) now always specify the correct depth.
Enclose: The Solid Stack-On Panel has a new part number.
Enclose: Single sided sliding doors no longer try to force a transom on neighbour panels that aren't supporting the door track.
Enclose: The transom height AFF is now correctly constrained for the Solid/Glass Combi panel with 3 frame segments.
LifeSPACE - Change QuickProperties (green box) for doors should now correctly be reflected in the graphics immediately.
LifeSPACE: Clear Post Caps in older drawings no longer have the possibility of showing a fake finish in the BOM.
LifeSPACE: Fixed crash when placing end of run postcaps.
LifeSPACE - All glass choices should now have the appropriate treatment options associated with them.
LifeSPACE: Markerboard applications must now be double sided.
Orlando: Scheme options should now apply to Orlando Vertical Storage correctly.
Panel & Worksurface Accessories: Fixed the height property on the tackboards.
Panel & Worksurface Accessories: Fixed crash caused from stretching external tiles like tackboards.
Panel & Worksurface Accessories: Fixed crash caused from tackboard not being connected to the panel.
Patterns: Glass materials no longer show as red material.
Patterns: Crash fixed that was caused from electrical in File Enclosures.
Patterns: Fixed crash when trying to place Wing Walls.
Premise: Fixed Super Base panel electrical routing for vertical routing.
Premise: Full Height connector material options fixed.
Premise: Fixed the top cap material animations to allow their application onto off-modular t-mount panels.
Premise: Fixed crash when applying Materials using the Material animations on tiles.
Premise: Fixed a crash in the Receptacle animation and fixed the Receptacle material to properly apply.
Planes: Removed double sided cutout option from all Collaborative tables.
Planes: Fixed tables surface in 3D from appearing sunk in when using a COM.
Seating: Improv tables have metallic finish option in green box. Also added a caster material option to go with the metallic option.
Seating: Seating Manager should now apply the options properly.
Tables: Fixed table surface 3D issue when using the Simple Graphics Engine.
UniGroup/UniGroup Too/Places: Fixed Clerestory kits to attach above panels.
Unigroup/Unigroup Too/Places: Fixed location of receptacles in 3D at raceway position.
Unigroup: Some glass surfaces refracted the reflections badly, fixed
Walls: Electrical wiring diagrams have had wire colours updated (3-3-2), and erroneous IG triangles removed from non-IG schematics.
Worksurfaces: Changed the support visible height in 2D.
Worksurfaces: Updated support tags so they no longer reset position on refresh.
Worksurfaces: Side/Corner bracket for worksurfaces should now place correctly.
Worksurfaces: Fixed a crash caused from placing supports on worksurfaces.
Worksurfaces: Fixed a crash caused from stretching Countertops.
X Series: Fixed Return with Ped to default to a layout.
X Series: Storage configuration text on X-Series attached storage moved to make it visible.
X Series: Removed wood front option from five-high personal storage towers with upper storage.
Version 4.2.17 (January 20, 2013)
Belong: Power tap, flush mount plate, and wall mount bracket will show part number when not connected to Beside storage or Reside worksurface.
Canvas: Updated Canvas custom titles so they should now be linked to the text visibility setting.
Canvas: Added Panel Elevation and Panel Elevation Dimension text style for changing the panel text font in panel type elevation. It is located in the Text Styles in the Tools tab.
Canvas: Finish codes appear in panel type elevations when loading drawing.
Canvas: Finish summary boxes recheck on their own.
Canvas: Maharam Messenger additional materials added.
Compose: Compose tiles no longer have unknown finish options available and will no longer block finish from being applied to top trim.
Compose: Fixed 3-way intersecting, no corner, no top cap to change to the correct material type.
Enclose: Using a Solid Stack On above Power Base electrical should now result in the correct pass-through spec.
Enclose: It should be easier to type in starting AFF and height when inserting the Plywood Backer.
Enclose: 4-Way Posts should no longer appear to take panel positions in the Enclose Summary Report.
Enclose: Glass Corners are no longer invisible in 2D Ceiling Track / Centerline view.
Enclose: Fixed a bug where righthanded Power Base receptacles were not allowed opposite a glass tile.
Enclose: Fixed crash when using the Conventional Electric Remover animation.
Enclose: Fixed a crash in the Change Wire Cfg animation.
Enclose: Fixed crash when changing the circuit type in Conventional Electrical circuits.
Enclose: Fixed the placement of the Conventional Electrical Buttons in the tab.
Enclose: Fixed the placement of glass on an angle.
Enclose / Enclose Frameless Glass: The default Wall Starter is now the Compressible variant.
Enclose / Enclose Frameless Glass: There is now better support for pre-SAP drawings that included inline posts (4inch or 6inch).
Enclose / Enclose Frameless Glass: Added Half Reveal to Manual Details.
Enclose / Enclose Frameless Glass: Updated Tolerance Legend.
Enclose / Enclose Frameless Glass: Rotation of auto-details now works the same as manual details.
Enclose / Enclose Frameless Glass: Starters no longer switch types to try to connect to panels that don't quite reach (or overreach).
Enclose / Enclose Frameless Glass: Satin Chrome is now the default finish for D352 pulls instead of Bright Chrome.
Enclose / Enclose Frameless Glass: Compressible starters can now be freestanding, and the allocation of compressible starter brackets has been updated to support this.
Enclose / Enclose Frameless Glass - 2D and 3D graphics have been added to represent the Off-Module T-Mount and associated Reveal Connectors.
Enclose Frameless Glass: Stretching runs with even glass module spread should no longer attempt glass sizes larger than the preferred module width specified in the toolbox.
Enclose Frameless Glass: Changing horizontal frame member oversizing should no longer recalculate glass pane widths.
LifeSPACE - Drawing and measuring tools can now snap to wall panel centerlines
LifeSPACE - A new part number, upcharge, and length restriction are now in effect for Chinook Beams.
Lighting: Free-placed Task light will produce light when rendered.
Panel and Worksurface Accessories: All external mounted tiles can stretch after being placed.
Panel and Worksurface Accessories: Overheads should now span much better when placing them initially.
Panel and Worksurface Accessories: Compose Storage Box no longer tries to snap to panels when wall mounted.
Panel and Worksurface Accessories: Monitor arm shows same rotation in 2D and 3D.
Panel and Worksurface Accessories: Overhead storage no longer moves when adding task light.
Panel and Worksurface Accessories: Fixed bug that changed the elevation when selecting the tasklight option.
Panel and Worksurface Accessories: Pencil drawer now has free place option.
Panel and Worksurface Accessories: Wall mount overhead back can be specified separately from overhead storage unit.
Panel and Worksurface Accessories: Can now place 54, 66, and 72 inch open shelf.
Panel and Worksurface Accessories: Crash fixed that was caused by empty meshes on monitor arm models.
Panel and Worksurface Accessories: Removed task light option from overhead storage units with laminate flipper doors.
Patterns: Fixed a crash with workwall missing it's part list
Premise: Finishes can be applied to top feed.
Premise: Canvas will try to used as many NX4-16 parts before trying to use NX4-10 parts.
Premise: Warning message added for 120 degree full-height connectors not in available sizes. Straight pre-configured connectors will create correct full-height and extended connector parts.
Premise: Task light brackets no longer appear past shelf edge in 3D when attached to overhead shelf.
Seating: Limited the Nano-Tex option on Zody task chairs to Fabric only.
Seating: Very seating has Shell material picker in Chair Materials section.
Seating: X99 Guest Chair can be rotated.
Seating: Improv table 2D graphics improved.
Tables: Fixed a crash in UniGroup square tables while loading old drawings.
Tables: Fixed the Premise 90 table from crashing for not having an edge.
Tables: Fixed the extension header for tables.
Unigroup: Top feeds will place for 4 circuit for UniGroup, UniGroup Too, and Places.
Unigroup: Added 56” panels to allow wood top caps.
Unigroup: Changed the 2D and 3D in doors so they appear the same.
Unigroup Too: Top infeed graphics fixed.
Unigroup Too: UniGroup Too door 3D matches 2D.
Unigroup Too: High Acoustical panel can now be specified using green box.
Unigroup Too: Finish post materials can be applied in the calculations.
Unigroup Too: Finish post shows correct material in 3D.
Walls: Movable text for Details should now stay oriented readable despite the orientation of the Detail itself.
Walls: Categories for Walls lines now appear in the Discount Dialog.
Walls: Negative Price Variants will now calculate as a negative to align with SAP.
Worksurfaces: Countertop now show available widths when stretching.
Worksurfaces: Support End now autosizes to width of rectangular convergent when not free-placed.
Worksurfaces: Manually placed supports will show in 2D.
Worksurfaces: Compose P-Leg autosizes correctly for all worksurfaces.
Worksurfaces: Countertop bracket finishes can be changed using Support Trim color on the worksurface scheme or through the calculations.
X Series: Added the leg option to the Open/File Combination Unit.
X Series: Top finish changes to wood on PST when wood top is selected.
Tables: Fixed a crash when loading old drawings that contained a UniGroup square table.
Belong: Fixed the center screen from causing a crash when it is changed to an editable.
Belong: Fixed the center screen from causing a crash when it is changed to an editable.
Worksurfaces: Z*FS supports now show their correct elevation in 2D so they remain visible while under worksurfaces.
Planes: Crash fixed on quick connect pass-through connectors.
Version 4.2.12 (December 16, 2013)
950 Series: Fixed material option on the lateral units.
Belong: Fixed a crash when modifying system tiles.