Marking & Labeling Systems Product Submittal Form

Overlaminations

Section 1: Basic Information
Instructions:
Please complete all sections and save this form electronically when possible.
Applicant Company and Preferred Contact Information:
Company Name:
Preferred Contact Name:
Email:
Telephone:
Do you have a current UL File for this submittal?
Yes, provide File and Volume information:
No, a new File will be established. Provide complete company and manufacturing location information in a separate document.
Is the submitter of this form acting as an Agent (third company) in this request?
Yes, provide contact information:
No
Request Type:
New Overlamination
Revised Construction/Rating of Existing Recognized Overlamination, Provide Section Number:
Product/Model Name:
If supplying this label construction as printed and unprinted, provide two model names to distinguish between them.
General Product Category/Use:
Unprinted Overlamination suitable for Additional Printing by End-User (PGJI)
Unprinted Overlaminations (PGGU)
This form covers overlaminations that are sold by label material suppliers in bulk roll/sheet form. The products may also be investigated to receive additional printing by end-use product manufacturers using thermal transfer, laser, hot stamping, or other types of simple printing equipment. These products are intended for use by label printers and converters in fabricating finished printed labels bearing information, instruction, or identification.
Section 2: Product Construction
Overlamination Style:
Shipped with a single release liner
Shipped with no release liner and self-wound
Layers of Construction:
Example:
Top Coating
Overlamination Film -
Adhesive -
Release Liner / 0.005 mm thick
0.025 mm thick
0.020 mm thick
N/A / Your Label
Total Thickness,
excluding release liner - / Nominal Thickness or Range:
Additional Comments about Layers of Construction or optional/alternate components if needed:
Does the label incorporate tamper evident or other security features? No, Yes, please describe:
Section 2: Product Construction (Continued)
Printing
Secondary Printing performed by End-User –
Printing Process:
Thermal Transfer Laser Hotstamp
Ink:
Color(s): Black
Supplier and supplier’s designation for ink:
Use printing inks based on the top layer UL Recognized Component overlamination? No, Yes
If alternate printing processes or inks will be used, please explain:
Additional Comments about printing, if needed:
Top Coat (applied by label manufacturer)
Supplier: / Supplier’s Designation:
Application thickness:
Finish: Glossy Matte
Additional Comments about top coat if needed:
Overlamination Stock and Adhesive Material
Obtained as single label stock component:
Supplier: / Supplier’s Designation:
Yes, UL File Number if yes:
No, include technical specification sheet of the component and complete characteristics section below / or / Adhesive & film obtained as separate components:
Film:
Supplier: / Supplier’s Designation:
Adhesive:
Supplier: / Supplier’s Designation:
Is this a UL Recognized Component adhesive?
Yes, UL File Number if yes:
No, include technical specification sheet of the component and complete characteristics section below
Overlamination Characteristics:
Finish : Top Coated, Print Treated / Glossy Matte
Material: Polyester Vinyl Polypropylene Polycarbonate
Adhesive: Acrylic Rubber / Emulsion (Water) Based Solvent Based
Additional Comments about overlamination material, if needed:
Please include all information for any alternate materials/components on a separate page, if necessary.
Section 3: Surfaces and Uses
Evaluate to:
UL 969, “Marking & Labeling System” Standard, complete table below
CSA C22.2 No. 0.15 “Adhesive Labels” Canadian Standard, complete table below
- Recognition Table
Face Stock Types: / Maximum Temp (°C) / Minimum Temp (°C) / Indoor Use* / Outdoor Use / Additional Conditions
LABEL ADOPTION - Use surfaces and uses of the Recognized Overlamination
OR indicate specific Face Stock Types and Uses below when you are not using Recognized Materials
or if you wish to evaluate for additional Face Stock Types
Face Stock Types: / Maximum Temp (°C) / Minimum Temp (°C) / Indoor Use* / Outdoor Use / Additional Conditions
Polyester
Vinyl
Polypropylene
Other:
Other:
* - Evaluate to Indoor Dry Use only. By default UL tests labels for Indoor Use which is suitable for high humidity and occasional exposure to water, if you would like to evaluate for the alternate rating of Indoor Dry Use, please indicate so
Additional Comments if needed:
- Canadian Recognition Table
Face Stock Types: / Maximum Temp (°C) / Indoor Use* / Outdoor Use / Additional Conditions
LABEL ADOPTION - Use surfaces and uses of the Canadian Recognized Overlamination.
OR indicate specific Face Stock Types and Uses below when you are not using Recognized Materials
or if you wish to evaluate for additional Face Stock Types
Face Stock Types: / Maximum Temp (°C) / Indoor Use / Outdoor Use / Additional Conditions
Polyester
Vinyl
Polypropylene
Other:
Other:
* - Evaluate to Dry Locations only. By default UL tests labels for Indoor Wet Locations, if you would like to evaluate for the alternate rating of Indoor Dry Locations, please indicate so.
Additional Comments if needed:
Section 4: Other Required Items
Also provide the following required information when it is available:
è  Technical specification or sell sheets for all unrecognized materials/components in the label (e.g. overlaminations, varnishes, stocks, adhesives)
è  Technical specification or sell sheets for all printing inks used (e.g. flexographic, screen, thermal transfer ribbons, etc.)
è  Any additions or changes in manufacturing locations
è  Any changes to the company name or contact information
Page 3 of 3
Last Saved by Ryan J Houle on 2011-12-11, 13:51