MSP430F5438
$149
· 100-pin socket for MSP430F5438
· Power Supply sources: USB, FET, 2x AA batteries
· Digital I/O Pins: 34
· Accessible analog inputs (12-bit ADC): 5
· PWM outputs: 12
· Flash Memory (MSP430F5438): 256KB
· RAM (MSP430F5438): 16KB
· Clock Speed (MSP430F5438): 18MHz
· Communication (MSP430F5438):
o 4x UART/LIN/IrDA/SPI
o 4x I2C/SPI
· 5-position joystick (up, down, left, right, push down)
· 2 push buttons
· 2 LEDs
· 138x110 grayscale, dot-matrix LCD
· 3-Axis Accelerometer (ADXL330)
· Microphone (Amplified by TLV2760)
· 3.5mm audio output jack (Features TPA301, 350mW Mono Audio Power Amplifier)
· Support for TI Low Power RF Wireless Evaluation Modules and eZ430-RF2500T. Currently supported modules:
o CC1100/CC1101EMK – Sub-1GHz radio
o CC2500EMK – 2.4 GHz radio
o CC2420/CC2430EMK – 2.4 GHz 802.15.4 radio
o CC2520/CC2530EMK – 2.4 GHz 802.15.4 radio
· USB connectivity for data transfer
· JTAG header for real-time, in-system programming
MSP430F5529
$149
· Integrated MSP430F5529:
o 128KB Flash / 8KB SRAM (10kB if USB is disabled)
o Full-Speed USB 2.0
o 16-Bit RISC Architecture up to 25-MHz
o 3x Timer_A Blocks, 1x Timer_B Block
o 2x USCI (UART/SPI/I2C) Blocks, 16Ch 12-Bit ADC12_A, 12Ch Comp_B, 63 I/Os
· USB Development Platform
· 5-pad capacitive touch strip (button or slider functionality)
· microSD Card Slot with 1GB card included.
· 102x64 grayscale, dot-matrix LCD with backlight.
· 4 push buttons (2x User Configured Pushbuttons, 1x Reset Pushbutton, 1x USB Bootstrap Pushbutton)
· 3 general purpose LEDs, 5 LEDs for capacitive touch buttons, and 1 LED Power indicator.
· Scroll wheel/Potentiometer
· Integrated EM headers allow support for TI Low Power RF Wireless Evaluation Modules and eZ430-RF2500T. Currently supported modules:
o CC1100/CC1101EMK - Sub-1GHz radio
o CC2500EMK - 2.4 GHz radio
o CC2420/CC2430EMK - 2.4 GHz 802.15.4 radio
o CC2520/CC2530EMK - 2.4 GHz 802.15.4 radio
· Integrated eZ-FET for Spy-Bi-Wire (2-wire JTAG) programming and debugging.
· JTAG header for full 4-sire JTAG programming and debugging.
· Multiple power supply options, including USB, JTAG, batteries, or external power supply.
· Easy access to F5529 I/O pins for prototyping. Port mapping available for additional flexibility.
MSP430FG4618
$99
· Devices Featured: MSP430FG4618, MSP430F2013
· Integrated peripherals: 12-bit Digital-to-Analog Converter, 12-bit SAR Analog-to-Digital Converter, 16-bit Sigma Delta Analog-to-Digital Converter, Operational Amplifiers, DMA, Multiplier, LCD Controller, Communication Interfaces: SPI, UART, I2C, IrDA
· Programming and Debugging: Can be programmed using any MSP430 Flash Emulation Tool (MSP-FET430UIF)
· Wireless expansion: Compatible with the following TI Wireless Evaluation Modules: CC1100, CC1101, CC1150, CC2500, CC2550, & CC2420
· Board Features: Microphone, buzzer, LCD, capacitive touch-pad, 2x push buttons, prototyping space, RS232 communication interface, 2x JTAG Programming Interfaces, 3.5mm headphone jack (audio output)
MSP-EXP430FR5739
$29
· Integrated MSP430FR5739 :
o 16KB FRAM / 1KB SRAM
o 16-Bit RISC Architecture up to 8-MHz
o 2x Timer_A Blocks, 3x Timer_B Block
o 1x USCI (UART/SPI/IrDA/I2C ) Blocks, 16Ch 10-Bit ADC12_B, 16Ch Comp_D, 32 I/Os
· 3 axis accelerometer
· NTC Thermister
· 8 Display LED's
· Footprint for additional through-hole LDR sensor
· 2 User input Switches
· Connections
o Connection to MSP-EXP430F5438
o Connection to most Wireless Daughter Cards (CCxxxx RF)
· User Experience
o Preloaded with out-of-box demo code
o 4 Modes to test FRAM features:
§ Mode 1 - Max write speed
§ Mode 2 - Flash write speed emulation
§ Mode 3 - Fast sampling with writes using accelerometer
§ Mode 4 - Fast sampling with writes using Thermistor
§ Mode 1 & Mode 2 include ULP option to turn off display & optimize for power management
MSP-EXP430G2
$4.30
· The LaunchPad development board features:
o 14-/20-pin DIP (N) socket
o Built-in flash emulation for debugging and programming
o 2 programmable LEDs
o 1 power LED
o 1 programmable button
o 1 reset button
· Enables development on any MSP430 Value Line device with 14- or 20-pin DIP (N) packages.
· The LaunchPad's integrated emulator interface connects flash-based MSP430 Value Line devices to a PC for real-time, in-system programming and debugging via USB.
· Includes one mini USB cable to interface with a PC.
· Included MSP430G2xx device features:
o MSP430G2211IN14 - 2kB Flash, 128B RAM, 10 GPIO, 1x 16-bit timer, WDT, BOR, Comparator A+
o MSP430G2231IN14 - 2kB Flash, 128B RAM, 10 GPIO, 1x 16-bit timer, WDT, BOR, 1x USI (I2C/SPI) 8ch 10-bit ADC
o Included MSP430G2xx devices feature preloaded sample programs.
· Free downloadable versions of IAR Kickstart and Code Composer Studio Ver 4 integrated development environments are available and include an assembler, linker, simulator, source-level debugger, and C-compiler. These free IDEs are unrestricted on MSP430 Value Line devices.
· RoHS compliant
DRV8412-C2
$199
DRV8412 power module base board with controlCARD interface (2x H-Bridge)- C2000 Piccolo F28035 controlCARD (pre-flashed with code to spin all motors using GUI)- GUI- Isolated XDS100 Emulation and Serial Connectivity- 2 Brushed Motors (38mm)- 1 Stepper Motor (23Y Square)- 24 V power supply- USB Cable- Wiring for Motors- USB Stick with Quick Start GUI, Documentation, and CCStudio v4.x Integrated Development EnvironmentAll software, hardware documents (schematics, gerbers, BOM) and updates are freely available through the C2000 development desktop tool: controlSUITE
http://www.ti.com/tool/drv8412-c2-kit
http://www.ti.com/lit/sg/slab034u/slab034u.pdf
http://www.ti.com/sitesearch/docs/universalsearch.tsp?searchTerm=DRV8412-C2&linkId=1