Diablosport
OEM Select instructions for U7140/U7145
Your new Predator for the 05-newer Mustang now includes multiple tunes designed to support the addition of an aftermarket cold air intake on your GT or V6 Mustang.
To access these tunes, follow these steps as outlined below.
1.Power the Predator up.
2.Once the tool is fully booted up, select ‘options’ from the main menu.
3.Use the arrow keys to go up once, you will see ‘OEM select’. Press enter here.
4.You will now see a list of supported cold air intake manufacturers. Select from this list the CAI you have on your car. (NOTE: If the cold air intake you have is not listed here, then you may need a custom tune to allow it to function properly.)
5.Once you have selected the appropriate manufacturer for your cold air intake, you will see a message on the Predator that reads:
”These tunes are designed by Diablosport using the XXXXX induction products”
6.The tool will offer you the option to ‘choose’ or ‘cancel’. Select choose for the induction setup you wish to use. The tool will then display the following message:
“Performance menu will now contain tunes pertaining to XXX (whichever manufacturer you chose will be displayed here).
7.Choose ‘continue’. This will take you back to the Options menu. Press escape or the left arrow button to get back to the main menu.
8.You may now install the tune. The menu containing the available tunes will now be set up for use with your specific CAI. (Example: If you chose C&L Performance, the tunes displayed will be C&L tunes. Choose the appropriate tune for your application and intended use.)
9. Follow the instructions in your owners manual to install the tune.