D&C WPB:lmm RESIDENTIAL VERSION
SECTION 077200
ROOF ACCESSORIES
PART 1 GENERAL
1.01 RELATED WORK SPECIFIED ELSEWHERE
A. Finish Carpentry: Section 062000.
B. Asphalt Shingles: Section 073113.
C. Stationary Metal Wall Louvers: Section 089100.
1.02 SUBMITTALS
A. Product Data: Catalog sheets, specifications, and installation instructions for each material specified.
PART 2 PRODUCTS
2.01 MATERIALS
A. Aluminum Ridge Vents: No. 650 by Leigh Products, 411 64th Avenue, Coppersville, MI 49404, (800)253-0361, VENT-A-RIDGE by Alcoa Building Products, P.O. Box 716, Sidney, OH 45365, (513)492-1111, or No. RV-10 by AMPCOR, Anderson Metal Products Corp., 111 Fellowship Rd., Taylorsville, MS 39168, (800)647-7063.
1. Accessories: Manufacturer’s standard or recommended straps, connectors, and end plugs.
2. Finish: Manufacturer’s standard paint finish, color as selected.
CONTINUOUS HALF RIDGE VENT SYSTEMS FOR CLEARSTORIES, SINGLE SLOPE ROOFS, AND SHED ROOFS ARE AVAILABLE FROM MOST OF THE MANUFACTURERS LISTED IN ABOVE AND BELOW, CHECK MANUFACTURER’S LITERATURE FOR DETAILS AND NUMBERS.
B. Shingle Over Ridge Vents: Highpoint Vent, Series 5, by North American Building Products Inc., 749 E. Mandoline, Madison Heights, MI 48701, (800)521-9920, V-400 Ridge Vent by Cor-A-Vent Inc., 16250 Petro Dr., Mishawaka, IN 46544, (219)255-1910, or Ridge Filter Shinglevent by Air Vent Inc., 4801 N. Propect Rd., Pedria Heights, IL 61614, (800)247-8368.
1. Accessories: Manufacturer’s standard or recommended straps, connectors, and end plugs.
2. Color: As selected from manufacturer’s standard colors.
C. Drip Edge: Prefinished .019 inch thick Aluminum.
D. Soffit System: Prefinished Aluminum traditional solid or perforated soffit panel, “F” and “J” channel and fascia cladding by Alcoa Building Products, Sidney, OH 45365, (937) 498-6441, Atas International,Inc. Allentown, PA 18106, (800)468-1441.
E. Continuous Soffit Vents: Model No. 649 by Leigh Products, Model 97 Vent-A-Strip by Alcoa, or Model No. SA-8W by AMPCOR.
1. Color: White.
BROWN AND MILL FINISH ALSO AVAILABLE, CHECK MANUFACTURER’S LITERATURE AND CHANGE NUMBERS AS REQUIRED.
F. Insulation Baffles: Guard-A-Vent by Leigh Products, BV Series Bafflevent by AMPCOR, or VC-N Series Insul-Gard Ventilation Channels by N.H. Rudeen Co., Inc., 2721 Nevada Avenue North, Minneapolis, MN 55427, (800)328-3802.
G. Pipe Flashing: Molded one-piece elastomeric pipe boot, by Portals Plus, Inc., 639 Thomas Dr., Bensenville, IL 60106, (630)766-5240.
PART 3 EXECUTION
3.01 INSTALLATION
A. Install the Work of this section in accordance with the manufacturer’s printed instructions for weather tight installation.
END OF SECTION
Updated 07/07/2009
Printed 4/16/2015 077200 - 2 Project No.