10x18 Sara’s Mansion – Check of List

Downloadable instructions are available at

www.cottagekits.com/manualsvm.htm

Page (1)

__________1 – 84 x 99 Pallet

__________1 – 12’ x 12’ Wrap

__________1 – 7’ x 8’ Floor

__________1 – R-Panel Face Up

__________1 – O-Panel Face Down

__________1 – Q-Panel Face Down

__________26 – 19” Top Bottom 15 L To L

__________34 – 21” Side Window Trim

__________3 – Bayside Rear Rafters

__________1 – Bayside T-bar 50 ¼”

__________1 – Bay Side T Bar 81” 2x4

__________4 – Bayside Rafters 2x4

__________4 – Bay Side Rafter Truss Gussets

__________2 – 1 ½” x 1 ½” x 21 7/16” Porch Brace

__________6 – Rafters Behind Turret 2x4

__________6 – Behind Turret Gussets

__________1 – Behind Turret Rear Rafter

__________1 – Behind Turret T Bar 38 7/8”

__________1 – Turret T Bar 48 ¾ “ L. P. 22 ½ Degree 2x3

__________1 – Door Latch

__________2 – Barrel Bolts

__________3 – Door Pulls

__________1 – Small Door Knob

__________7 – Turret Rafters

__________1 – 30”Turret Rafter (Installed on turret rafter)

__________1 – Turret Rafter 38 1/8”

__________1 – Turret Rafter 39 7/8”

__________1 – Turret Ball

__________1 – 3” x 48” Strip Siding Under Door

__________1 – #1 25” S.Q. To L. P. 22 ½ Degree

__________4 – #2,3,4,5, 21 7/8”, L.P. To L.P. 22 ½ Degree

__________1 – #6 21 ¾” L. P 22 ½ Degree to L. P 45 Degree

__________1 – #7 62” S.Q.

__________1 – #8 33 ½” SQ

__________8 – Roof Top Fancy Trim

__________2 – 83 7/8” S.Q. To L.P. 37 Degree Adult Door Stud

__________1 – 81 7/8” O Panel Stud S.Q.

__________2 – 2x3 Roof Braces Angled Left

10x18 Sara’s Mansion - Check of List

Page (2)

__________2 – 2x3 Roof Braces Angled Right

__________4 – V-Channels 70 ½” 67 ½” 43 ½” 24”

__________1 – E Panel Face Up

__________1 – D 1 Panel Face Up

__________1 – B 1 Panel Face Up

__________1 – S Panel Face Up

__________1 – H Panel Face Up

__________1 – A1-Panel

__________1 – Turret Corner 45 Degree 83 ¼”

__________1 – I-Panel Roof Trim 13”

__________1 – Above Porch Turret Corner

__________5 – 2x6 With Gingerbread

__________1 – E-D Panels Corner Trim 70 ¼ “

__________3 – Outside Corner 71 ½ “

__________1 – Turret Corner 47” 22 ½ Degree

__________2 – Bayside Corner Trim 71” 15 Degree

__________2 – Bayside Corner Trim 71 ½ “ 60 Degree

__________2 – Porch Corner Trim 47 ½ “

__________1 – Top Of Porch Roof – 55”

__________1 – 32 5/8” L. To S. 37 Left Porch Roof Trim

__________1 – 26 1/8” L. To S. 37 Right Porch Roof Trim

__________OSB – #10,13,14,15,16,3,12,21,8,9,4,2,7,23,1,22,18

__________1 – 5’x 8’ Floor Turret End

__________1 – M-Panel

__________8 – Flowerboxes

__________1 – 3’x 8’ Floor

__________1 – D-Panel

__________1 – L-Panel

__________2 – Wall Braces 79 ¼ “

__________2 – Beside Adult Door Trim 73 ¾ “

__________4 – Turret Corners 83 ¼ “ 22 ½ Degree

__________1 – K-Panel

__________1 – J-Panel

__________1 – B-Panel

__________1 – I-Panel

__________1 – N-Panel

__________1 – C-Panel

__________2 – Door Panel

__________2 – Lofts

10x18 Sara’s Mansion – Check of List

Page (3)

__________1 – V- Panel Porch Roof

__________1 – W- Panel

__________1 – X- Panel

__________OSB – #6,19,17,11

__________1 – 42 ¼ “ L.P. 45 Degree 2x3 Loft Post

__________1 – 2x6 Block For Loft Post 18 ½ “

__________1 – G- Panel

__________1 – T- Panel

__________1 – F- Panel

__________1 – Loft Railing

__________1 – Ladder

__________1 – Dormer Siding

__________1 – P- Panel

__________1 – Porch Deck

__________1 – 56”x 79 ¼ “ Floor

__________1 – 40”x 2’ Floor

__________1 – A- Panel

__________1 – OSB #20,5

__________2 – Screwboxes 8x10 8x12

__________7 – Flashing #1,2,3,4,5,6,7

__________1 – Ice guard 18”x 18”

Downloadable instructions are available at

www.cottagekits.com/manualsvm.htm for manual

List checked by _________ Batch_ 1018-SM-7__

Thanks for buying from Little Cottage Co. PO Box 455 Berlin OH 44610

Jesus loves you! Phone 330-893-4212

Little Cottage Co.

You will need to buy the following to complete your 10*18 kit.

9 – Bundles shingles (There are usually 3 bundles per square if the want to sell it by the square)

8 – 10’ foot long pieces drip edge with 1” face

2 – 4x4x192” pressure treated runner

2 – 4x4x210 ¾ ” pressure treated runners

Hardware Box (included with kit)

Use:

¾” Roofing nails for main part of roof.

7/8” Roofing nails for the ridge cap.

2 ½” Screws to fasten main parts of playhouse.

1 ¼” Black headed screws to fasten roof and doors.

1” White aluminum nails for outside corner trim.

Downloadable instructions are available at www.cottagekits.com/manualsvm.htm

Be sure to download manual before starting!