VMPT 2018: Program
Monday, May 7
5:00- 7:30pm Welcome Event & Registration- Phoenix Bar and Grill (McMaster)
Tuesday, May 8
8:00amRegistration/ Breakfast- MDCL
9:00amOpening Ceremony & Conference Keynote- Prof. Dr. Ing. Zaeh
MDCL 1110
10:00amBreak & Posters
10:30amOral Presentations
MDCL 1110 / MDCL 1116A new method of rapid rigid-body parameter identification of MIMO systems
Niels van Tuijl, Chia-Pei Wang, Tom Oomen, KaanErkorkmaz / Process-Structure-Property Relationship for Selective Laser Melting of Aerospace Alloys
Mostafa Yakout, M. A. Elbestawi and Stephen Veldhuis
A machine tool design methodology integrating FEM analysis and CNC controller model
Chia- Pei Wang, Tzuo-Liang Luo, Shuo-Peng Liang / Metal Additive Manufacturing for Automotive Applications
MortezaNarvan and M. A. Elbestawi
Harmonic Positioning Error Correction and MIMO Based Identification of Ball Screw Drives
HessamKalbasiShirvani, Patrick Bevers, KaanErkorkmaz / Investigation of Thermomechanical Properties of unidirectional CFRP using Dynamic Mechanical Analysis
Chaneel Park, Simon Park, Yuan Wei
A 3D Ultrasonic Vibration Tool Holder for Cutting Carbon Fiber Reinforces Plastics
Jian Gao, Yusuf Altintas / Strategies for Post-Machining of High Valued Additive Manufacturing Components
Yanli Zhu, MihaelaVlasea
Surface Texturing of Bulk Metallic Glass using Vibration Assisted Inclined Milling
Naresh Kumar Maroju, XiaoliangJin / Geometric Modeling of Powder Fed Laser Fusion Process with 2D Toolpathsand five- axis operation
Deniz Sera Ertay, KaanErkorkmaz, MihaelaVlasea
12:10pmNetworking Lunch- MDCL
1:10pm Oral Presentations
MDCL 1110 / MDCL 1116Chatter detection using Operational Modal analysis
MartinJuul, Keivan Ahmadi, Ole Balling / Control built- up edge formation and chip breakability when machining austentic stainless steel using high pressure coolant supply
YassminSeid Ahmed, Stephen Clarence Veldhuis
Real- time Energy-based Detection of Milling Chatterwith 2D Toolpaths and five- axis operation
HakanCaliskan, Zekai Murat Kilic, Yusuf Altintas / Assessment of Tribological properties of DLC, TiN and CrN coated drills for machining of Inconel 718
Muhammad Zafarullah Khan, Sukanta Bhowmick, Ahmet Alpas
Dynamics and Stability of Turn Milling Operations with Varying Time Delay
AlptuncComak, Yusuf Altintas / Tribological and wear performance of nanocomposite PVD hard coatings deposited on aluminum die casting tool
Pietro Stolf, Edinei Locks Junior, Jose de Paiva, German Fox-Rabinovich and Stephen Veldhuis
Stability analysis of time- periodic milling dynamics using Extended Multi-Frequency Solution
Keivan Ahmadi, YaserMohammadi / Reduced Parameter GMS Friction Model
Mustafa HakanTurhan, Ginette Tseng, KaanErkorkmaz, BarisFidan
Graphical and Model- Based Vibration Control for Machine Tools Using an Inertial Actuator
Jason Zeng, KaanErkorkmaz, Xavier Beudaert, Oier Franco / Assessment of surface integrity during machining of superduplex stainless steel obtained with three different PVD hard coatings
Edinei Locks Junior, Jose de Paiva, Pietro Stolf, German Fox-Rabinovich and Stephen Veldhuis
3:10 pm Break & Posters
3:30pm Oral Presentations
MDCL 1110 / MDCL 1116Two- Stage Feedrate Optimization for Freeform Toolpath Contouring
Christina Chen, Katie DiCola, KaanErkorkmaz, Xavier Beudaert / Development of a nanocomposite-based strain and force sensors for machining operations
Allen Sandwell, Mehdi Sanati, Hamid Mostaghimi, Simon Park
Extraction of Uncut Chip Geometry in Gear Hobbing
MiladAzvar, Jacob H Van Dorp, KaanErkorkmaz / Machining of Inconel 718 using Nano-Fluid Minimum Quantity Lubrication
HussienHegab, HossamKishawy
Machine Tool Volumetric Error Feature Extraction and Classification Using Principal Component Analysis and K- means Methods
Kanglin Xing, SofianeAchiche, Rene Mayer / Superabsorbent Coolant, A New Approach to Semi-Dry Machining
Yousef Shokoohi, Jose Mario Paiva and Stephen Veldhuis
Memory- Efficient Multi-Level Voxel Representation for Workpiece Models in Machining Simulation
Jimin Joy, Jack Szu-Shen Chen, Hsi-Yung Feng / Minimum time trajectory generation of 5- axis percussion laser drilling
Kyongjae Wo, KaanErkorkmaz, William Cook
Study of Multi- Sensor Tool Wear Monitoring System with Modified Recurrent Hidden Markov Model in the Milling of Inconel 718
Ming-Chyuan Lu, Chung-Ying Wang, Shean- JuinnChiou / Chip Geometry for Force Predication in a Virtual Power Skiving
Pierce McCloskey, KaanErkorkmaz, Fathy Ismail
5:30- 8:30pm Banquet Dinner- University Club
Wednesday, May 9
8:00 amLight continental Breakfast
9:00 am Official McMaster Welcome MDCL 1305/1307
Ishwar Puri, Dean Faculty of Engineering, Master of Ceremony
9:05 am Introduction
Morning Keynotes: MDCL 1305/1307
9:15 am Jason Myers, CEO, Next generation Manufacturing Canada
- Introduction to NGM Canada, its role in the AMS and its current plans
9:35 am Don McIntosh,Senior Fellow of Manufacturing Technology, Pratt and Whitney Canada
- Industry 4.0 - Experiences from the Shop Floor
10:15amNetworking Break
Expert Panels: MDCL 1305/1307
10:35 am Expert Panel I- Innovation- Transitioning Ideas into Production in a Globally Competitive Market
Moderator: Irene Sterian, CTO, NGM Canada and Director, ReMAP
Panelists: Tony Valeri, VP Corporate Affairs, Dofasco
Patricia Hawkins, Strategic Partnerships & Innovation Services, Xerox Res. Centre of Canada
Yusuf Altintas, Professor, NSERC-CANRIMT Network PI, UBC
11:30-11:40 John Jackson, Regional Representative, NSERC
- NSERC’s role in funding innovation in Canada
11:40 am Expert Panel II- Collaboration- Drawing together Canada’s Innovation Resources
Moderator: David Muir, Director, Research and Development, NRC-London
Panelists: Michele Davies, Director, Partnership Development, OCE
Mo Elbestawi, Professor and Director (W Booth SEPT), McMaster
12:30 pm Stephen Veldhuis, Professor and Director (MMRI)
- Instructions for the industry Open House which follows
12:35 pmNetworking LuncheonMDCL(Walk or bus to events on Campus and at MIP)
1:00 pm 6th Annual Industry Open House and Main Poster Session
MMRI, HATCH, CCEM, MARC, BTech, W Booth SEPT, CanmetMATERIALS, CANS + more
5:00 pm Optional Social Activities
Thursday, May 10
8:00 amBreakfast
8:30 amCANRIMT Group Meeting (all CANRIMT students and faculty) MDCL 1110
10:00 am CANRIMT SCI. Committee Meeting JHE 265
or
Optional Student Workshops
-Technical Workshop CutProMachPro JHE 109A
-Technical Workshop Materials Characterization JHE 112
12:00 pm CANRIMT Board Meeting JHE 265
1:00pmOptional Student Workshop - Technical Workshop MT Connect JHE 109A
Poster Submissions
Condition-based monitoring using artificial intelligence applied to the aerospace industry
Gabriel Bernard, SofianeAchiche and Rene Mayer
Using Ball Dome artefact to evaluate five-axis machine tool measuring performance
Ali Hashemi
Fractal analysis applications for improving monitoring and prediction systems in machining
Xavier Rimpault, Marek Balazinski and Jean-Francois Chatelain
The effects of initial conditions on entire too life in milling of TI-MMCs
Saeid Kamalizadeh and Marek Balazinski
Effectiveness of special compensation grid table for three and five-axis operation
SarehEsmaeili and René Mayer
Gripping force measurement in boring and turning operations using nanocomposite-based strain sensor
Mehdi Sanati, Allen Sandwell, Hamid Mostaghimi, Chaneel Park and Simon Park
Estimation of Loop Stiffness for Multi-axis Machine Tool
Sungcheul Lee, Hyunsoo Kim, Jooho Hwang and Chun-Hong Park
Multi-tool milling for reduced cutting force and high material removal rate
SegonHeo, Jongyoup Shim and Seung-Kook Ro
Selection of machining parameters using a correlative study of cutting tool wear in high speed turning of AISI 1045 steel
Luis Wilfredo Hernández González, YassminSeid, Ahmed, R. Pérez Rodríguez, P.C. Zambrano Robledo and Stephen Veldhuis
Investigation of tool wear geometry changes and measurement in the machining process
Baoquin (Sophia) Deng. Khalid Saifullah, Wanting Wang, Jose Mario Paiva and Stephen Veldhuis
Evaluation of the cutting performance of mono and multi-layered nanocomposite PVD coatings during machining of Inconel DA 718
Silvio Capasso, Luca Settineri, Giovanni Belingardi, Jose de Paiva and Stephen Veldhuis
Assessment of CBN tools during High-speed Dry Machining on low carbon steel
Kan Zhang, Stephen Veldhuis, Jose de Paiva and Simon Oomen- Hurst
Influence of different edge preparation methods on cutting edge performance
Wanting Wang, Stephen Veldhuis and Jose de Paiva
Wear performance of new self-lubricating PVD coatings during machining of Ti6A14V alloy
Mohammad Chowdhury, JM Paiva and SC Veldhuis
Performance of low-stress thick AlTiNPVD coating for turning of compacted graphite iron (CGI)
Majid Abdoos, Sushant Rawal, Bipasha Bose, Jose de Paiva and Stephen Veldhuis
A Neuro- Fuzzy Approach based Tool Condition Monitoring in AISI H13 Milling
Md. ShafiulAlam, Mayam Aramesh, Jose de Paiva and Stephen Veldhuis
Effect of metal working fluids on drilling and tapping of die-cast Al-12Si alloy engine blocks
Rohan Barooah, Yousef Shokoohi, Jose de Paiva and Stephen Veldhuis
Bimetallic Engineering Applications and Machinability Challenges
Adbulellah Hbbani
Study of Varying Machinability of GCI
Yesong Liu, Simon Oomen-Hurst, Ahmed Sweed and Stephen Veldhuis
Selective Laser Melting of Lattice Structures used in Biomedical Implants
Dalia Mahmoud and M.A. Elbestawi
Review of Selective Laser Melting Modeling and Simulation
M. A. Balbaa, M. A. Elbestawi and Jeff McIsaac
Additive Manufacturing of Metal Matrix Composites (MMCs) using Selective Laser Melting (SLM) Process
Eskandar Fereiduni and M.A. Elbestawi
Post-processing of the additively manufactured AlSi10Mg parts produced by Selective Laser Melting
Ahmed Maamoun, Mohamed Elbestawi and Stephen Veldhuis
A FEM- based approach for tool wear estimation in machining of Ti-6A1-4V
MD Khalid Saifullah