Teledyne Monitor Labs is a leading supplier of environmentalmonitoringinstrumentation, systems andsoftware.

APPLICATION/SETUP INFORMATION FOR SM425 OXYGEN (O2)ANALYZER

1.CUSTOMERCONTACTINFORMATION

*Name: / *Date: / (TML Use Only)
Title: / RFQ:
Quote:
P.O.:
TML Order:
*Company:
*Phone:
FAX:
Email:
*Plant Site:
*Site Address:
*Plant Contact:
*Stack Identification: / Limited to 10 characters

2.APPLICATION

A.Function(SelectOneoftheFollowing)

B.ComplianceMonitoring(ProvideDetails)

Federal (Specify):
State (Specify):

3.PLANTCHARACTERISTICS(ProvideDetails)

*CombustionSource/Process(Specify):Utility Boiler - CoalUtility Boiler - OilUtility Boiler - GasCement KilnLime PlantPaper MillSteel MillGlass ManufacturingPlastic ManufacturingCoal PreparationMunicipal Waste CombustorPetroleum RefineryAsphalt PlantLead SmelterCopper SmelterBrass/Bronze PlantZinc PlantAluminum PlantFertilizer ProductionOther ManufacturingOther
*Fuel(s) (Specify):
*Particulate Controls (Specify, If No Particulate Controls, State If Excessive Particulate Condition):
*NOX Controls (Specify):
*Flue Gas Desulfurization (Specify):
*Elevation Above Sea Level (Specify): /
*Unusual Conditions (Specify):

4.SM425EQUIPMENTINTERFACEREQUIREMENTS

A.TMLDAS,SM8XXXAnalyzer(SelectOneoftheFollowingProvideDetails)

Model (Specify):

B.OtherDataRecordingSystems(SelectOneoftheFollowingProvideDetails)

Model (Specify):

C.4-20mAAnalogSignals(SelectOneoftheFollowingProvideDetailsthatIncludetheNumberofAnalogSignalsNeeded)

D.RelayContactSignals(SelectOneoftheFollowingProvideDetailsthatIncludetheNumberofDiscreteI/ONeeded)

5.INSTRUMENTAIRAVAILABILITY

A.APollutantFree,ParticulateFree,Oil-Free,DryAirwith-4°F (-20°C)DewPoint (SelectOneoftheFollowing)

B.30to50PSIG (207 to 345 KPA)Pressure(SelectOneoftheFollowing)

C.1LPMFlowCapability(SelectOneoftheFollowing)

D.InstrumentAirtobeUsedasCalibrationAir(SelectOneoftheFollowing)

6.ELECTRICALPOWER(SelectOneoftheFollowingProvideDetails. PowerRequirementsare100-240VAC,300W,45-66Hz,SinglePhase)

*Voltage (Specify):
*Amps (Specify):
*Frequency (Specify):

7.PROBEINSTALLATIONANDOPERATINGCONDITIONS

A.Site(SelectAllthatapplyfromtheFollowingProvideDetails)

*Inner Diameter (Specify): /
*Outer Diameter (Specify in Inches): /
*Structure Material (Specify):

B.AccessPortMountingFlange(SelectOneoftheFollowing)

C.Flange Orientation(SelectOneoftheFollowing)

D.Stack or Duct Environment(Select One of the Following)

E.GasConditions(ProvideDetails)

Nominal / High / Low
O2 (%)
AmbientTemp (°F or °C)
StackGas Temp(°F or °C)
StackGas Velocity
(Ft/Sec or m/Sec)
StackGas Pressure
(In. of H2O or mm of Hg)
Dew Point (°F or °C)
ParticulateLoading
(Grains/SCF or mg/SCM)

F.Unusual Requirements(SelectAllthatApplyfromtheFollowing)

G.Installation Description(Provide Details)

GeneralDescription ofPlannedInstallation:
Describe SpecialRequirementsfor theSM425:
Describe SpecialRequirementsfor the Site:

*Please forward Checklist to your Regional Teledyne Monitor Labs Sales Manager *

Or

Email: