35 000V HIGH VOLTAGE LAMP


E101 = E101A

The patrolite is made of high quality engineering plastic which can withstand rough impact when used. Its strong and sophisticated structure incorporates the following features : (A) Search light, (B) Flash light, (C) High voltage Electric Shock and (D) Siren. The Patrolite is specially designed for the Police, Security Guards and the people who need support, rescue and defense, etc..

DESCRIPTION OF CONTROLS

  1. Push-button for Search Light/Flickering Flash Light.
  2. Push-button for High Voltage.
  3. Siren Ring.
  4. Penetrating Pins Ring.

SEARCH LIGHT/ FLICKERING FLASH LIGHT

The search Light/Flicketing Flash Light is controlled by Push-button (1) which has a 4 cycle capability, namely, OFF ® SEARCH LIGHT ON ® FLICKERING FLASH LIGHT ON ® OFF. When the Push-button (1) is switched at "SEARCH LIGHT ON" position. The Search Light is turned on. To turn off the Search Light, simply push the Push-button again. When the Push-button (1) is switched at "FLICKERING FLASH LIGHT ON" position. The Flash Light flickers within a second Push the Push-button (1) again to turn off the Flickering Flash Light. The next push will turn on the Search Light and so on.

HIGH VOLTAGE

The High Voltage is controlled by the Push-button (2). When the Push-button (2) is pushed. Sparkles will jump over the 6 stainless steel bars incorporated in the head of the Patrolite. To cut off the High Voltage, simply push the Push-button (2) and so on. A very high voltage of 35KV is induced when the Push-button (2) is switched at "HIGH VOLTAGE ON" position. Sparkles and explosives will emit and electric shock will immediately cause tremendous discomfort and loss of control to the attacker.

SIREN

Firmly hold the Patrolite and rotate the Siren Ring (3) in the left-ward direction until if stops. Siren roars when ten siren windows are completely open.

PENETRATING PINS RING

If the attacker is wearing a heavy coat. Rotate the Penetrating Pins Ring (4) in the right-ward direction and two metal pins will come out. The Penetrating Pins carry a much stronger electric shock effect than the stainless steel bats as illustrated above.

CAUTION

Do not rotate the penetrating pins ring (4) when High voltage is being induced. It may shock yourself. Rotate the Penetrating Pins Ring (4) only when the Push-button (2) is not on "HIGH VOLTAGE ON" position.

OTHER INSTRUCTIONS

  1. The Patrolite uses 2x4R6 and 2x2R14. Install the batteries in the direction as indicated in the label the Battery Compartment.
  2. To preserve battery life, remove batteries from the Battery Compartment in the Patrolite will not be used for a long period of time.
  3. The high voltage induced by the Patrolite is designed to cause an electric shock without harm to the skin, muscle and other organs of human body. However, it should be kept in a safe place without easy reach of children.


SPECIAL INSTRUCTION FOR PATROLITE-RX

RECHARGING RACK adjusts current to charge battery inside Patrolite-rx and indicates charging condition by a multicolor led (6) which becomes green when it is ready to charge, red when charging and yellow when charging is complete.

POWER ADAPTOR (9) supply dc current for RECHARGING RACK to charge battery inside Patrolite-Rx. Plug the POWER ADAPTOR (9) into nearby wall power outlet and insert plug (10) into jack (8) in RECHARGING RACK. Install RECHARGING RACK at place of easy access. Seat Patrolite-rx on RECHARGING RACK whenever it is not in use. Before inserting be sure that socket (5) of Patrolite.-rx is facing plug (7) of RECHARGING RACK.

WARNING non-rechargeable battery can be used for Patrolite-rx. But never and never try to recharge the battery inside Patrolite-Rx for it might cause danger to damage Patrolite-rx completely.

SPECIFICATION OF POWER ADAPTOR (10) output 200mA, 18-22Vdc. Size 36x360mm, weight 550gr, batteries non included 2x4R6 and 2x2R14, voltage 35 000V.

1