NZQA unit standard / 30698 1
Page 1 of 2
Title / Charge or inflate aeronautical components using high-pressure charging equipment
Level / 4 / Credits / 4
Purpose / People credited with this unit standard are able to: prepare to charge or inflate aeronautical components; charge or inflate aeronautical components; and complete the activities related to the charging or inflating of aeronautical components.
Classification / Aeronautical Engineering > Aircraft Servicing
Available grade / Achieved

Guidance Information

1All tasks are to be carried out in accordance with enterprise procedures, the enterprise being the organisation carrying out the work. Enterprise procedures referred to in this unit standard are the applicable procedures found in the following:enterprise exposition; manufacturer publications; Government and local body legislation; airworthiness authority requirements.

2Range

Gaseous charging may include but is not limited to – air, nitrogen, carbon dioxide, but excludes oxygen.

Outcomes and performance criteria

Outcome 1

Prepare to charge or inflate aeronautical components.

Performance criteria

1.1Task is determined by reviewing maintenance documentation.

1.2Resources are obtained and checked for serviceability or status in accordance with enterprise procedures.

Rangepublications,tools, equipment, safety equipment, materials.

1.3Component to be charged or inflated is identified and matched with documentation.

Outcome 2

Charge or inflate aeronautical components.

Performance criteria

2.1High-pressurecharging equipment is matched with system to be replenished in accordance with enterprise procedures.

2.2Component is charged or inflated in accordance with enterprise procedures.

2.3Any defects are reported and documented in accordance with enterprise procedures.

Outcome 3

Complete the activities related to the charging or inflating of aeronautical components.

Performance criteria

3.1Completion activities specific to the task and work area are carried out in accordance with enterprise procedures.

Rangemay include but isnot limited to – tool control, cleanliness, tidiness, return of publications, preparation for next activity.

3.2Resources are checked for serviceability and returned to service or storage in accordance with enterprise procedures.

Rangetools, equipment, safety equipment.

3.3Documentation is completed in accordance with enterprise procedures.

Planned review date / 31 December 2022

Status information and last date for assessment for superseded versions

Process / Version / Date / Last Date for Assessment
Registration / 1 / 23 November 2017 / N/A
Consent and Moderation Requirements (CMR) reference / 0028

This CMR can be accessed at

Comments on this unit standard

Please contact ServiceIQ you wish to suggest changes to the content of this unit standard.

ServiceIQ
SSB Code 9068 / New Zealand Qualifications Authority 2018