2015 Scac Amendment Subcommittee Meeting

2014 SCAC Sub-Committee Meeting Agenda

May 8, 2014

Page 2

2015 SCAC AMENDMENT SUBCOMMITTEE MEETING

10:00 AM – Room 302

May 13, 2015

AGENDA

WELCOME …………………………………………………………...... Ted Miltiades, Director

Codes and Research

·  Introduction of Sub-Committee Chairman and Members

Chairman: Gregori Anderson, CBO, Representing Code Enforcement Officials

Members: Morgan Wheeler, CBO, Representing Code Enforcement Officials

William Guinade, Representing Licensed Plumbing Contractors

Windell Peters, Representing Designee, DCA

Tim Williams, Representing Home Builders

·  Introduction of DCA Staff and Guests

·  Turn meeting over to Chairman Gregori Anderson

BUSINESS SESSION…………………………………………………. Gregori Anderson, Chairman

Review of Proposed State Code Amendments

1.  2009 IECC 402.4.2.1 Testing required - Revise to read. By David Goulding & Mike Barcik.

2.  2009 IECC 402.4.2.2 Low-rise multifamily testing protocol - Revise to read. By David Goulding & Mike Barcik.

3.  2009 IECC 401.2 Compliance - Add new section. By Ryan Taylor.

4.  2012 IRC M1901.3 Prohibited location - Revise to read. By Stan Everett.

5.  2012 IRC G2447.2 (623.2) Prohibited location – Revise to read. By Stan Everett.

6.  2012 IMC 917.2 Prohibited location – Revise to read. By Stan Everett.

7.  2012 IFGC 623.2 Prohibited location – Revise to read. By Stan Everett.

9.  2014 NEC 210.12 Arc Fault Circuit-Interrupter Protection – Add new section. By Bettie Sleeth/ Stanley Richardson, Home Builders Association of Georgia.

10.  2012 IPC 1002.1 Fixture traps – Revise to read. By Ronald George, Plumb-Tech Design & Consulting Services, LLC.

11.  2012 IPC 1002.3 Prohibited - Revise to read. By Ronald George, Plumb-Tech Design & Consulting Services, LLC.

12.  2012 IPC 1002.4 Trap Seals – Revise to read. By Ronald George, Plumb-Tech Design & Consulting Services, LLC.

13.  2012 IPC 3201.1 Design of traps - Revise to read. By Ronald George, Plumb-Tech Design & Consulting Services, LLC.

14.  2012 IPC 3201.2 Trap seals and trap seal protection – Revise to read. By Ronald George, Plumb-Tech Design & Consulting Services, LLC.

15.  2012 IPC 3201.3 Trap setting and protection – Revise to read. By Ronald George, Plumb-Tech Design & Consulting Services, LLC.

16.  2012 IPC 3201.5 Prohibited trap designs – Revise to read. By Ronald George, Plumb-Tech Design & Consulting Services, LLC.

17.  2012 IPC Chapter 44 References – Revise to read. By Ronald George, Plumb-Tech Design & Consulting Services, LLC.

OLD BUSINESS

NEW BUSINESS

CONCLUSION OF MEETING…………………………………………..Gregori Anderson, Chairman

ADJOURN

The Georgia Department of Community Affairs is committed to providing all persons with equal access to its services, programs, activities, education and employment regardless of race, color, national origin, religion, sex, familial status, disability or age.

For a reasonable accommodation please contact Annette Henson at 404-679-3119 or email