[Central Body]
2 - Encoded plug not programmed
1 - Encoded plug faulty
4 - Speedometer programming faulty
3 - K -number for speedometer faulty
5 - Speed limit faulty
1 - Internal fault
2 - Encoded plug is faulty
3 - Encoded plug is faulty
4 - Encoded plug is faulty
5 - Encoded plug is faulty
6 - The program of the encoded plug is faulty
7 - Over-voltage on binder R recognized
8 - K - number is faulty
9 - Tank transmitter malfunction
10 - Temperature display is faulty
11 - Brake pad sensor shows worn pads
12 - Tank reserve contact is faulty
13 - Combi knob is faulty
2 - Travel impulse number (K - number) is changed
4 - Voltage supply binder R is faulty
5 - Over supply on binder 15 is recognized
9 - Service period display (SIA)
10 - Tank-transmitter voltage not plausible
11 - Cooling liquid sensor voltage is not plausible
12 - Oil temperature sensor voltage is not plausible
14 - Resetting knob for trip-meter
15 - Travel signal from the speedometer-giver is not plausible
16 - Tachometer signal is not plausible
17 - Injection signal (TI) is not plausible
18 - Brake-Pad sensor shows worn pads
19 - Driver door contact! Function not plausible
20 - Ignition key contact! Function not plausible
1 - Diagnostic-Unit is defective
2 - DAC
3 - Diagnostic line RxD is faulty
4 - Binder 31 is faulty
5 - Temperature sensor is defective
6 - Binder 15 (12 Volt) is faulty
7 - Speed - A - signal
8 - Binder R (12 Volt) is faulty
10 - Binder 50 is faulty
11 - Drive away lock
12 - Stanchion-signal faulty
13 - Thermo-sensor
15 - Data line to the instrument panel is defective
16 - Diagnostic line TxD is faulty
17 - Binder 30 is faulty
18 - Temperature-warning gong is defective
19 - Time-warning gong is defective
20 - Parking heat system is defective
21 - Parking ventilation is defective
22 - Travel impulse is not in order
23 - Alarm horn is defective
24 - Drive-away exit is faulty
25 - Parking ventilation is defective
26 - Spare Contact Reservoir
1 - Central advice light is defective
2 - Gong T2 is defective
3 - Gong T1 is defective
4 - Code exit is faulty
5 - Alarm horn is defective
6 - Timer is defective
7 - Temperature entry is faulty
8 - Data line CLC is faulty
9 - Control line LAC is faulty
10 - Data line DATA is faulty
11 - Binder R (12Volt) is faulty
12 - Binder 15 (12 Volt) is faulty
13 - Bonnet-/Radio contact is faulty
14 - Speedometer A-signal is not plausible
15 - Injection signal DME is missing
16 - Stanchion-signal is faulty
17 - Diagnostic line TxD is faulty
18 - Diagnostic line RxD is faulty
19 - Steering-column switch not recognized
20 - Dimmer signal is faulty
21 - Brake light test switch faulty
1 - Binder R (12 Volt) is faulty
2 - Connection-fault! Please check line MID PIN 17 to Electronic-chassis-module (EKM) PIN 1!
Step 1 and interval are on at the same time. Please check to see if the ZKE-ground-module PIN D4 or D5
has a short cut to ground. You must replace or repair the connection! If the connection is O.K., you must replace the windshield-wiper switch! Blocking-security windshield-wiper-motor set!
The windshield-wiper-motor was blocked in stage II. Please delete the fault storage!
Blocking-security active!
Windshield-wiper movement is either completely or partially blocked
Power door-lock relay to SECURE defect
Please check the connections between 'BASIC-module' and 'RELAY-module. Otherwise please replace the 'RELAY-module'!
Power door-lock relay to LOCK defect
Please check the connections between 'BASIC-module' and 'RELAY-module. Otherwise please replace the 'RELAY-module'!
Power door-lock relay to UNLOCK defect
Please check the connections between 'BASIC-module' and 'RELAY-module. Otherwise please replace the 'RELAY-module'!
1 Relay for the power windows passenger-side defect
Please check the connections between 'BASIC-module' and 'RELAY-module.
Otherwise please replace the 'RELAY-module'!.
2 Relay for the power windows passenger-side front defect
Please check the connections between 'BASIC-module' and 'RELAY-module.
Otherwise please replace the 'RELAY-module'!.
3 Relay for the power sunroof defect
Please check the connections between 'BASIC-module' and 'RELAY-module.
Otherwise please replace the 'RELAY-module'!.
4 Relay for the power windows passenger-side rear defect
Please check the connections between 'BASIC-module' and 'RELAY-module.
Otherwise please replace the 'RELAY-module'!.
5 Relay for the power windows driver-side rear defect
Please check the connections between 'BASIC-module' and 'RELAY-module.
Otherwise please replace the 'RELAY-module'!.
6 Relay for the power windows driver-side front defect
Please check the connections between 'BASIC-module' and 'RELAY-module.
Otherwise please replace the 'RELAY-module'!.
7 Relay for the power windows driver-side and power
sunroof defect
Please check the connections between 'BASIC-module' and 'RELAY-module.
Otherwise please replace the 'RELAY-module'!.
8 Power window driver-side front distance and time control
Please check mechanism for difficulty in movement.
Please check the end-position-setter.
The relay-module is probably fault.
9 Power window passenger-side front distance and time control
Please check mechanism for difficulty in movement.
Please check the end-position-setter.
The relay-module is probably fault.
10 Power window passenger-side rear distance and time control
Please check mechanism for difficulty in movement.
Please check the end-position-setter.
The relay-module is probably fault.
11 Power window driver-side rear distance and time control
Please check mechanism for difficulty in movement.
Please check the end-position-setter.
The relay-module is probably fault.
12 Power sunroof distance and time control
Please check mechanism for difficulty in movement.
Please check the end-position-setter.
The relay-module is probably fault.
1
Pin contact power lock - Drive for driver door fault
Check the power lock module circuit-breaker connection and the connection to the pin contacts.
Is the mechanism working? (select power lock mode!)
2
Pin contact power lock - Drive for passenger door faulty
Check the power lock module circuit-breaker connection and the connection to the pin contacts.
Is the mechanism working? (select power lock mode!)
3
Pin contact power lock - Drive for hatch door faulty
Check the power lock module circuit-breaker connection and the connection to the pin contacts.
Is the mechanism working? (select power lock mode!)
4
Pin contact power lock - Drive for driver door fault
Check the power lock module circuit-breaker connection and the connection to the pin contacts.
Is the mechanism working? (select power lock mode!)
5
Pin contact power lock - Drive for passenger door faulty
Check the power lock module circuit-breaker connection and the connection to the pin contacts.
Is the mechanism working? (select power lock mode!)
6
Pin-contact!
Check the power lock module circuit-breaker connection and the connection to the pin contacts.
Is the mechanism working? (select power lock mode!)
7
Power lock relay is stuck!
One of the relay contacts is stuck. The relay must be
replaced!
8
Power lock relay didn't attract! A relay in the module didn't operate. Please delete the
fault in storage and lock the power lock from the driver door. In case of malfunction and if the fault is still stored, the power lock module must be replaced!
9
Power lock relay is stuck!
One of the relay contacts is stuck. The relay must be replaced!
11
Power lock relay is stuck!
One of the relay contacts is stuck.The relay must be replaced!
10
Power lock relay didn't attract!
A relay in the module didn't operate.Please delete the fault in storage and lock the power lock from the driver door. In case of malfunction and if the fault is still stored, the power lock module must be replaced!
12
Power lock relay didn't attract!
A relay in the module didn't operate. Please delete the
fault in storage and lock the power lock from the driver door. In case of malfunction and if the fault is still stored, the power lock module must be replaced!
13
CRASH-sensor was activated!
No fault!
14
CRASH-sensor or the connection is faulty! Check the CRASH-sensor for movement. The switch should not move!
Change the sensor in the near future
15
Repeat-blocking was activated!
No fault!
16
Fault in the door-lock-heater!
Check the connection to the door-lock-heater!
17
Fault in the door-lock-heater!
Check the connection to the door-lock-heater!
18
Fault in the door-lock-heater!
Check the connection to the door-lock-heater!
19
Fault in the door-lock-heater
Check the connection to the door-lock-heater!
20
Connection to the interior light is faulty! Please check!
21
Insufficient voltage appeared!
Please check the battery and the alternater!
22
Power limits were exceeded!
Check the cable between the module to the driver for diconnection. Please check the power lock drive!
23
Power limits were exceeded! Check the cable between the module to the driver for diconnection.
Please check the power lock drive!
24
Voltage supply disconnected!
Please check the circuit breaker and connections of the power lock.
You may change the power lock module!
25
Ground-connection to the power lock is disconnected!
Please check the power lock module cable connection.
26
Internal fault!
There is an internal fault. Please delete the fault storage
and lock the power lock from the driver door.
In case of malfunction and if the fault is still stored, the power lock module must be replaced!
27
Driver-door-contact active for over 16 minutes! The door was open longer than 16 minutes.
No fault! Please delete the fault storage!
28
Passengers-door-contact active for over 16 minutes! The door was open longer than 16 minutes.
No fault! Please delete the fault storage!
29
Rear-door-contact active for over 16 minutes!
The door was open longer than 16 minutes.
No fault! Please delete the fault storage!
1 Base-module (GM) faulty
2 Data exchange driver door module with base-module (GM) faulty
3 Data exchange passenger door module with base-module (GM) faulty
6 Data exchange power sunroof module with base-module (GM) faulty
7 Driver door module faulty
8 Passenger door module faulty
11 Power sunroof module faulty
12 Standing current relay module: Limits exceeded
14 Data exchange power window switch block with base-module (GM) faulty
15 Incoming signal clamp R at the base module (GM) faulty
21 Signal from wiper reset contact faulty
22 Signal from windshield-pressure knock switch faulty
23 Relays wiper park position faulty
24 Relays wipestage 1 faulty
25 Relays wipestage 2 faulty
26 Relays washing pump faulty
27 Windshield intensive cleaning relays faulty
28 Windshield-pressure module faulty
29 Headlight cleaner module faulty
35 Selection Mode Doorlock heater faulty
45 Fault during activity of central locking solenoids
46 Central locking shut! Fault in selecting the central locking solenoids
47 Central locking open! Fault in selecting the central locking solenoids
48 Crash-sensor
50 Faulty power window switch for power window driver side front
51 Faulty power window switch for power window passenger side front
52 Faulty power window switch for power window driver side rear
53 Faulty power window switch for power window passenger side rear
54 Power window driver side front faulty
55 Power window passenger side front faulty
58 Fault by selecting: Open power window driver side front
59 Fault by selecting: Open power window passenger side front
60 Fault by selecting: Open power window driver side rear
61 Fault by selecting: Open power window passenger side rear
62 Fault by selecting: Close power window driver side front
63 Fault by selecting: Close power window passenger side front
64 Fault by selecting: Close power window driver side rear
65 Fault by selecting: Close power window passenger side rear
66 Connection from relay module to power window driver side front faulty
67 Connection from relay module to power window passenger side front faulty
80 Fault power sunroof switch
81 Fault power sunroof engine or module
82 Select power sunroof engine faulty
95 Electronic power cut: over power in driver side circuit
96 Electronic power cut: over power in passenger side circuit
97 Over power at the base-module (GM) exist
98 Over power at the relay-module (RM) exist
<OFF: <ENTER> > <POWER>
Open power window left-front-driver-side......
Close power window left-front driver-side.....
Open power window right-front passenger-side..
Close power window right-front passenger-side.
Open power window left-rear driver-side......
Close power window left-rear driver-side......
Open power window right-rear passenger-side...
Close power window right-rear passenger-side..
CLOSE/LIFT power sunroof......
OPEN/LOWER power sunroof......
Close power door-lock......
Open power door-lock......
Secure power door-lock......
Indoor - light......
Windshield wipers ON/OFF......
Windshield wash-pump ON/OFF......
Intensive headlight cleaner ON/OFF......
Hatch back OPEN......
Central lock module ZVM 2
Central-body-electronic
Power door-locks
Power window and power sunroof
Windshield wiper-control
Central lock passenger-door Open......
Central lock hatch door Close......
Central lock hatch door Open......
Central lock driver-door Close......
Central lock driver-door Open......
Central lock passenger-door Close......
Windshield-wiper...... (ON/OFF)......
ZKE/ZVM Component-contact
The faults in storage of ZKE/ZVM was deleted!
ZKE/ZVM
W a r n i n g !
In the next part of the diagnosis (the ZKE/ZVM), you may close the power windows, the power sunroof, and the windshield wipers. The blocking function is not in operation when using this part of the program. Keep all items, and hands and fingers out of the range of these parts of the car, especially when you close the windows with the ZKE function. The window, sunroof or wiper will not stop moving!!! You can cause injury or even lose fingers!!!
I have read this warning, and I am aware of this danger. To continue, you must confirm with <Y> To return to the main menu, press <ESC>