Specifications
Last updated 02/11/04
These specifications are to be used with Diversified Woodcrafts, Inc standard product line. Any modifications to a unit would render the particular specification invalid. Use the find option in Microsoft Word to find the particular specification you are looking for.
1516K 54” Octagon Workstation with Pedestal Base
Unit shall be constructed of solid oak, oak and hardwood veneers using dowel construction. Octagon shaped unit shall provide space for four people. Unit shall have a pedestal base to support the 54” solid epoxy top, which is 1” thick.
Molded epoxy resin tops shall consist of modified epoxy resin that has been especially compounded and cured to provide the optimum physical and chemical resistance properties required of a heavy-duty laboratory tabletop. Tops shall be a uniform mixture throughout their full thickness, and shall not depend upon a surface coating that is readily removed by chemical and/or physical abuse. Tops shall be non-glaring. Tops shall be 1" thick, with 1/8” drip grooves provided on the underside at all exposed edges. Further, all exposed edges shall be a 1/8" bevel or a 3/16” radius at front top edge and at vertical corners.
The aprons shall be 4-1/2”H x 13/16”D and hold 4 drawers and 4 GFI protected AC duplex electrical receptacles.
Unit shall have four drawers. Drawers shall be dovetailed and glued on all four sides, have 3/4” oak veneer core fronts with 1/8” edge banding and 1/2” plywood box, wire pulls and locks. Drawer glides for the small drawers shall be 100# epoxy coated steel dynamic glides with nylon bearings. Inside drawer measurements shall be 18”W x 11”D x 3-1/2”H.
Unit shall include an epoxy resin sink (16”W x 16”D x 7”H) with strainer, stopper and chemical resistant trap, two multi-service fixtures (water and gas), and four each rod sockets. Unit shall have a removable panel to access the utilities. Base shall have rubber base molding.
Unit shall be finished natural with waterborne finish.
Overall dimensions shall be 54”W x 54”D x 36”H.
1546K 54” Octagon Workstation with Drawer Base
Unit shall be constructed of solid oak, oak and hardwood veneers using dowel construction. Octagon unit shall provide space for four people. Unit shall have a drawer base to support the 54” solid epoxy top, which is 1” thick.
Molded epoxy resin tops shall consist of modified epoxy resin that has been especially compounded and cured to provide the optimum physical and chemical resistance properties required of a heavy-duty laboratory tabletop. Tops shall be a uniform mixture throughout their full thickness, and shall not depend upon a surface coating that is readily removed by chemical and/or physical abuse. Tops shall be non-glaring. Tops shall be 1" thick, with 1/8” drip grooves provided on the underside at all exposed edges. Further, all exposed edges shall be a 1/8" bevel or a 3/16” radius at front top edge and at vertical corners.
The apron rails shall be 4-1/2” H x 13/16”D and hold 4 GFI protected AC duplex electrical receptacles.
Unit shall have 16 drawers. Drawers shall be dovetailed and glued on all four sides, have 3/4” oak veneer core fronts with 1/8” edge banding and 1/2” plywood box, wire pulls and locks. Drawer glides for the small drawers shall be 100# epoxy coated steel dynamic glides with nylon bearings. Inside drawer measurements shall be 20-1/2”W x 11”D x 5-1/2”H.
Unit shall include an epoxy resin sink (16”W x 16”D x 7”H) with strainer, stopper and chemical resistant trap, two multi-service fixtures (water & gas), and four each rod sockets. Unit shall have one of the base cabinets removable to access the utilities. Base shall have rubber base molding.
Unit shall be finished natural with waterborne finish.
Overall dimensions shall be 54”W x 54”D x 36”H.
1616K 60” Octagon Workstation with Pedestal Base
Unit shall be constructed of solid oak, oak and hardwood veneers using dowel construction. Octagon shaped unit shall provide space for four people. Unit shall have a pedestal base to support the 60” solid epoxy top, which is 1” thick.
Molded epoxy resin tops shall consist of modified epoxy resin that has been especially compounded and cured to provide the optimum physical and chemical resistance properties required of a heavy-duty laboratory tabletop. Tops shall be a uniform mixture throughout their full thickness, and shall not depend upon a surface coating that is readily removed by chemical and/or physical abuse. Tops shall be non-glaring. Tops shall be 1" thick, with 1/8” drip grooves provided on the underside at all exposed edges. Further, all exposed edges shall be a 1/8" bevel or a 3/16” radius at front top edge and at vertical corners.
The aprons shall be 4-1/2”H x 13/16”D and hold 4 drawers and 4 GFI protected AC duplex electrical receptacles.
Unit shall have four drawers. Drawers shall be dovetailed and glued on all four sides, have 3/4” oak veneer core fronts with 1/8” edge banding and 1/2” plywood box, wire pulls and locks. Drawer glides for the small drawers shall be 100# epoxy coated steel dynamic glides with nylon bearings. Inside drawer measurements shall be 24”W x 11”D x 3-1/2”H
Unit shall include an epoxy resin sink (16”W x 16”D x 7”H) with strainer, stopper and chemical resistant trap, two multi-service fixtures (water and gas), and four each rod sockets. Unit shall have a removable panel to access the utilities. Base shall have rubber base molding.
Unit shall be finished natural with waterborne finish.
Overall dimensions shall be 60”W x 60”D x 36”H.
1646K 60” Octagon Workstation with Drawer Base
Unit shall be constructed of solid oak, oak and hardwood veneers using dowel construction. Octagon unit shall provide space for four people. Unit shall have a drawer base to support the 60” solid epoxy top, which is 1” thick.
Molded epoxy resin tops shall consist of modified epoxy resin that has been especially compounded and cured to provide the optimum physical and chemical resistance properties required of a heavy-duty laboratory tabletop. Tops shall be a uniform mixture throughout their full thickness, and shall not depend upon a surface coating that is readily removed by chemical and/or physical abuse. Tops shall be non-glaring. Tops shall be 1" thick, with 1/8” drip grooves provided on the underside at all exposed edges. Further, all exposed edges shall be a 1/8" bevel or a 3/16” radius at front top edge and at vertical corners.
The apron rails shall be 4-1/2” H x 13/16”D and hold 4 GFI protected AC duplex electrical receptacles.
Unit shall have 16 drawers. Drawers shall be dovetailed and glued on all four sides, have 3/4” oak veneer core fronts with 1/8” edge banding and 1/2” plywood box, wire pulls and locks. Drawer glides for the small drawers shall be 100# epoxy coated steel dynamic glides with nylon bearings. Inside drawer measurements shall be 20-1/2”W x 11”D x 5-1/2”H.
Unit shall include an epoxy resin sink (16”W x 16”D x 7”H) with strainer, stopper and chemical resistant trap, two multi-service fixtures (water & gas), and four each rod sockets. Unit shall have one of the base cabinets removable to access the utilities. Base shall have rubber base molding.
Unit shall be finished natural with waterborne finish.
Overall dimensions shall be 60”W x 60”D x 36”H.