PROD_0002

DECLARATION OF PERFORMANCE

1.  Unique identification code of the product-type :

Rigips Type F

2.  Type, batch or serial number or any other element allowing identification of the construction product:

Rigips Type F

Width: 1200mm

Edge: AK, VK, HRAK, HR

Thickness: 12.5mm, 15mm

Lengths: 2000mm,2500mm,2800mm,3000mm

3.  Intended use or uses of the construction product, in accordance with the applicable harmonised technical specification, as foreseen by the manufacturer :

Plasterboard Lining

4.  Name, registered trade name or registered trade mark and contact address of the manufacturer:

SAINT GOBAIN HELLAS

KLISSOURAS 5, METAMORFOSSI, 14452

Tel : +30 2102831804

Plant: Agia Paraskevi, 30400 Etoliko

Tel : +30 26320 22657

5.  Where applicable, name and contact address of the authorised representative whose mandate covers the tasks specified in Article 12(2):

N/A

6.  System or systems of assessment and verification of constancy of performance of the construction product :

System 4

System 3

7.  In case of the declaration of performance concerning a construction product covered by a harmonised standard:

EN 520

8.  In case of the declaration of performance concerning a construction product for which a European Technical Assessment has been issued:

N/A

9.  Declared performance :

The characteristics in the table below apply to all products mentioned in 2 above.

Essential Characteristics / Performance / Harmonised technical specification
Thermal Conductivity / 0,25 W/ (m.K) / EN 520
Shear strength / NPD / N/A
Reaction to fire / A2-s1-d0 (B1) / EN 520
Water vapour resistance factor / 10 / EN 520
Air permeability / 1,4 x 10-6 m3/m2.s.Pa / EN520
Impact resistance / NPD
Direct airborne sound insulation
Acoustic absorption
Longitudinal flexural strength / 550N (12.5mm) / EN 520
650N (15 mm) / EN 520
Transverse flexural strength / 210N (12.5mm) / EN 520
250N (15 mm) / EN 520

10.  The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 9.

This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4.

Certified in accordance with:

Quality Management System ISO 9001:2008

Signed for and on behalf of the manufacturer by:

George Tatas, Managing Director Saint Gobain Hellas

…………………………………………………. …………………………………..

Place and date of issue Signature