REFERENCES

[1] Theodore, W. (2002)“ElectricalMachines, Drives, and Power Systems”. Fifth Edition, New Jersey, Prentice-Hall International.

[2] Wikipedia, the free encyclopedia, “Generation”, “ on October 2, 2006.

[3] TVA, TennesseeValley Authority,“Coal-Fired Power Plant”.“ on October 25, 2006.

[4] Wikipedia, the free encyclopedia, “Steam turbine”, “ on September 29, 2006.

[5] Wikipedia, the free encyclopedia, “Cooling tower”, “ onOctober 25, 2006.

[6] Jerry C., W. (1999) “Power Distribution and Control”, AC Power Systems Handbook, 2nd Edition,CRC Press LLC,Boca Raton.

[7] Wikipedia, the free encyclopedia, “Hydropower”, “ onOctober 2, 2006.

[8] Wikipedia, the free encyclopedia, “Hydroelectric”, “ onOctober 2, 2006.

[9] WVIC,Wisconsin Valley Improvement Company, “Hydropower Facts”, “ on October 25, 2006.

[10]UMR, University of Missouri-Rolla,“Hydroelectric Power”,“ onOctober 25, 2006.

[11] Wikipedia, the free encyclopedia, “Nuclearpower”, “ onSeptember 29, 2006.

[12]Wikipedia, the free encyclopedia, “Nuclearfission”, “ onOctober 4, 2006.

[13] Wikipedia, the free encyclopedia, “Windpower”, “ onOctober 3, 2006.

[14] EERE,Energy Efficiency and Renewable Energy, “Wind and Hydropower Technologies”,“ on November13, 2006.

[15] EERE,Energy Efficiency and Renewable Energy, “Wind and Hydropower Technologies”, “ on November13, 2006.

[16] Wikipedia, the free encyclopedia, “Solar power”, “ onOctober 3, 2006.

[17] Wikipedia, the free encyclopedia, “Photovoltaic”, “ onNovember 14, 2006.

[18]Wikipedia, the free encyclopedia, “Photovoltaic array”, “ array”.Retrieved onNovember 14, 2006.

[19]EIA, Energy Information administration,“Solar Energy - Energy from the Sun”, “ Retrieved on November 13, 2006.

[20]Grigsby, L.L. (2001) “The Electric Power Engineering Handbook”. CRC Press LLC, Alabama.

[21] PCS, Public Service Commissionof Wisconsin,“Electric Transmission Lines”,Technicalreport,2004,“

[22] Meier,A. (2006)“Electric Power Systemsa Conceptual Introduction”, IEEE press,Hoboken, New Jersey

[23] Sanders,M., and Ray, R.,“Power Line Carrier Channel Application Considerationsfor transmission Line Relying“, Pulsar Technologies, Inc. 4050 NW 121 Avenue.

[24]Sclater, N., and Traister, J.,(2003) “Hand Book of Electrical Design Detail”, second edition , McGraw-Hill Companies, Manufactured in the United States of America.

[25]Harlow, J. (2004)“Electric power transformer engineering”CRC Press LLC,Boca Raton

[26] Anjan Bose. “Power System Stability: New Opportunities for Control”, Chapter in

Stability and Control ofDynamical Systems and Applications, Derong Liu and PanosJ. Antsaklis, editors, Birkhäuser (Boston), 2003.“

1

[27]Wikipedia, the free encyclopedia, “Powersystemprotection”, “ onDecember 3, 2006.

[28] Khudai, J. (2006), American Transmission Company,“3M Aluminum Conductor Composite Reinforced Application (ACCR)”,

“

[29]University of Washington, Electrical of Engineering. “Voltage Security Assessment”, “ Retrievedon January10, 2007.

[30]Larsson, M.(2002) “The ABB Power Transmission Test Case”. Technical report. Corporate Research, ABB Schweiz AG.

[31]Tomsovic, K., (2001) “Automated Operating Procedures for Transfer Limits”. Technical report. “PowerSystemsEngineeringResearchCenter in School of Electrical Engineering and Computer Science”,Washington State University.

[32]Zima, M.(2002) “Special Protection Schemes in Electric Power Systems”.

Technical report. Swiss Technical Institute of Technology, Zurich.

[33]Zhu, D. (2003),“Power System Reliability Analysis with Distributed Generators”,“master thesis”faculty ofVirginia Polytechnic Institute.

[34]PSNH, PublicServices of New Hampshire,power quality information,

“

[35]Negnevitsky, M. and Tan Loc Le. (1996) “An Expert System Based Aid for Clearing Overloads on Power System Plant”. IEEE International Conference on Intelligent Systems Applications to Power Systems Proceedings, p.p:242 – 246. Florida.

[36]Begovic, M., Milosevic B., and Novosel ,D.,(2002), “A Novel Method for Voltage Instability Protection” IEEE 35th Annual International Conference on System Sciences,p.p:802- 811. Hawaii.

[37]NPC, National Productivity Council,“Electrical System”, chapter 1,Technology Menu on Energy Efficiency.

[38]EIA, Energy Information Administration,“Upgrading Transmission Capacity for Wholesale Electric Power Trade”,“ on February18, 2007.

[39]ARVA,Network Protection & Automation Guide,“Power Quality”, chapter 23,

“ Product_Detail2_1056536208199.html”.

[40]Knazkins, V. (2004) “Stability of Power Systems with Large Amounts of Distributed Generation”. Doctoral Thesis Stockholm,Sweden.

[41] Dommel,H and Meyer, S. (1974)“Computation of Electromagnetic Transients”

Volume: 62,Issue: 7,p.p983- 993

[42] Kulkarni ,S.V. and Khaparde,S.A.(2004) “Transformer Engineering Design and Practice”.Indian Institute of Technology, BombayMumbai, India

[43]Shandilya, A. Gupta, H. and Sharma, J.(1993) “Method for generation rescheduling and load shedding to alleviateline overloads using local optimization”. IEE Proceedings: Generation, Transmission and Distribution, Volume: 140,Issue: 5, p.p 337-342.

[44] El-Ela, A.A.A. Tweig, N.T.. (2004) “Line switching reconfiguration corrective action for overloads in power systems”. Universities Power Engineering 39th International Conference, Volume: 3, p.p:992 – 998.

[45] Mohamed, A., and Jasmon, G.B. (1988)“Realistic Power System Security Algorithm”Department of Electrical Engineering, Volume: 135,p.p:98-106,Kuala Lumpur

[46]Abrantes, H.D.andCastro, C.A.(2000) “New Branch Overload Elimination Method Using Non Linear Programming”.IEEE Meeting,Power Engineering Society,and Volume: 1,p.p: 231-236.

[47] Kib Tek, (T.R.N.C)Electricity Authority of Turkish Republic of North Cyprus

1