TRGT112/27/2018
L U S U N G S H O E L T D. --- P A C K I N G I N S T R U C T I O NT A R G E T -- ( T R G T )
COMMERCIAL MARKING03/28/00
MATERIAL CONTENT / COUNTRY OF ORIGIN / STK#(=DPCI#) Serially printed on both shoes, in the Right Back (Heel Seat), or on the Side (Quarter Lining), or on Tongue Lining.
** If the marking to be printed on Forepart Sock, should get Buyer‘s APPROVAL.
SIZE
1. Size "MUST" always be stamped in the MIDDLE of the Heel area of Sock Lining.
2. If Sock Lining of shoe is NOT VISIBLE, the SIZE must be MOLDED into each OUTSOLE.
TIE
16" Elastic Attachment (Factory supply) through Inside Top Eyelets / Inside Sox Tab LOOP / Backs of the Quarter Straps (Sandal) / Inside Counter Interlacing on each shoe.
LOOP FOR TIEING
SOX - TAB ® / Approximate visible: 2“ x 3/8”. Approximate total size: 4“ x 3/8”U.S. PATENT 4624060 / (1“ on each side for attachment purposes under the sock)
To be attached on Sock Edge or Shaft Top / Printing: Always in "BLACK" / Ribbon color is the discretion of the buyer. Ribbon must be printed in such a manner that the Trademark and Patent number (U.S. Patent 4624060) are totally and clearly visible on the shoe, do not deviate from the print.
PRICE TICKET TAG (PRINT SIZE)
A. Put on RIGHT shoe using a 3“ Secure-Attachment
1. For EYELET shoe: Put through right inside top eyelet.
2. For FLATS/BOOTS: Put through the Sox Tab Loop.
3. For SANDALS: Put through back of the right quarter strap.
4. For INTERLACING shoe: Put ticket around portion of interior on right inside quarter.
*** (Note: NEVER put a HOLE through the material of shoe)
B. PACKAGED shoes: Ticket may be applied to either the Front or the Back of the package, Size information should be visible on the Front of the package.
C. Boxed Shoes: Print “Shoe Name” Instead of Shoe Description on Price Ticket & Box End Label.
Non-Boxed Shoes: Still print “Shoe Description” on Price Ticket, adopt the needed information from the Top “Description” column of “Buyer Shoe Box & Label Spec Sheet” (DU393-517 09/04/98)
HANG TAG -- MUST order from Target Designated SUPPLIER
1. "School Separate" Hang Tag (2-Sided shoe Hang Tag) code: "00SHS" (Factory order from Soabar)
2. "Cherokee" Hang Tag (Factory order from Paxar) in 2 Types:
A. For Full Leather Upper.
B. For the Upper that is composed with Leather & Man-Made Material.
*** "Dept#96 & #93" will no longer require "Cherokee" Hang Tags to be included on Cherokee Leather that are being Boxed.
3. "Xhilaration with Cross Color" Hang Tag
4. TAGGING WAY -- Hang Tags to be hanged together with Price Ticket Tag, that is: -- Price Ticket - Logo Tag -- to be hanged SERIALLY.
BOX
1. End Label: Print LOGO/STYLE/COLOR/SHOE SKETCH/DPCI#/SIZE/BARCODE (Factory order from one of the four designated suppliers: Soabar/Paxar/Shore To Shore)
2. Must use specified BOX SIZE CODE#01-17, If the size is really not suitable to the shoes, must double check & reconfirm with customer.
3. SIZE TAB STICKERS: To be attached on right upper corner of POP-UP TAB of box lip. (Factory order from one of three suppliers) - IF the style is WIDE WIDTH or NON-MARK SOLE must be printed on size tab.
(a) Code: TTAB - To order from Soabar & Paxar.
(b) Code: STABP(Plain)/STABWW(+ Wide Width)/STABNW(+ Non-Mark Sole) - To order from Shore To Shore.
4. Target Owned Brand BOXES must be ordered from SHORE TO SHORE.
5. Genuine / Split Leather and Comfort Flags: The flag should be placed on the left side of the end panel, this is the same end panel where we have applied the Owned Brand Box sticker, provided by Target‘s 3 designated suppliers.
(a) GUFLG - Genuine Leather with Man Made Components.
(b) SFLG - Split Leather with Man Made Components.
(c) AFLG - Genuine Leather with Man Made Components COMFORT.
(d) BFLG - Split Leather with Man Made Components COMFORT.
(e) CFLG - COMFORT.
6. NATIONAL/LICENSED BRAND:
(A) Use vendor‘s National-License brand color/design but adhere to Target’s required shoe box dimensions.
(B) There are TWO OPTIONS for Size Tab Stickers:
(1) Adjust the shoe box design to incorporate a pop-up size tab into vendor‘s box design and apply a size stickers (TTAB) provided by Target‘s designated suppliers, or other CODES provided by Shore To Shore. (See above item 3: size tab stickers)
(2) Order a peel and stick size flag (GTAB) from SOABAR. The flag is anchored to the upper inside right corner of the box on the same end panel where we are applying the “E” Gum-Ticket.
UNBOXED SHOES
1. Inners of 1
A. Polybags must be used to define inners in the following required styles: Boots / Prewalk / Animal slippers / Sock tops / Slippers
(1) Shoes must be ticketed and attached together as a pair using a 16“ Elastic attachment before placing them in polybag.
(2) Secure the polybag using a rubber band, elastic or fabric strip. DO NOT use metal or tape.
B. Rubber bands must be used to define inners on the following required styles: Beach combers / Beach socks / Jellies / Soccer slides / Flip flops.
(1) Use a strong, wide rubber band around each pair of shoes. DO NOT polybag individual pairs.
(2) Shoe must be ticketed and attached together as a pair using a 16“ elastic attachment before banding.
2. Multi-Unit inners (i.e. case pack of 6/3)
Polybags must be used to define inners on the following required styles: Boots / Animal slippers / Sock tops / Prewalk / Slippers / Beach combers / Beach socks / Jellies / Soccer slides
(1) Shoes must be packed tightly in a single polybag to prevent shifting, DO NOT band or polybag individual pairs.
(2) Shoes must be ticketed and attached together as a pair using a 16“ elastic attachment before placing them in polybag.
(3) Secure the polybag using a rubber band, elastic or fabric strip. DO NOT use metal or tape.
3. Assortment Item/Full Case Flow
Boots / Animal slippers / Sock tops / Prewalk / Slippers / Beach combers / Beach socks / Jellies / Soccer slides / Flip flop.
(1) Shoes must be packed in an eggcrate carton. NOTE: If needed, may use a plastic lined master carton or one large outer polybag.
(2) DO NOT polybag or band individual pairs.
(3) Shoes must be ticketed and attached together as a pair using a 16“ elastic attachment.
BOX LABEL
1. TARGET OWNED BOX: The Label to be attached on one Box End, must order from different supplier by different logo. [Including LOGO / SHOE NAME / COLOR / SKETCH (LEFT Shoe Facing LEFT) / DPC# / SIZE / BARCODE] - Box Label in "L“ or ”S" Size to fit box size.
2. National Brand Box: Barcode Gum-Ticket (code "E") to be attached on lower right hand corner of the display end of the box (Same panel of size tab), order from one of four designated suppliers.
BREAKPACK FLOW ORDER (INNERPACK ORDER)
1. 12 Master / 4 Inner: 12 PRS In the carton, 4 PRS packed in Inner Groupings, there will be 3 INNER PACKS of 4 pair of shoes.
2. 6 Master / 2 Inner: there will be 3 INNER PACKS OF 2 pair of shoes, case packs of 2 boxes tie together: 2 Shoe Boxes should be STACKED in shipable inners, one on TOP of the other , do not stack the boxes side by side. Boxes must be packaged together using one large POLYBAG. Secure the polybag using Rubber Bands, Elastic or Fabric Strips, DO NOT use metal or tape. Cinched part of the bag Standing upright.
** Use a polybag with some small air holes to allow air to circulate.
3. 6 Master / 1 Inner: Secure box top to base by banding the box together with a Strong, Wide Rubber Band.
CARTON
1. Cartons must be Taped, Glued or Stapled (Tape must not cover any carton markings)
2. Bands must not be used unless carton weight or any one of the dimensions exceeds the maximum listed below.
3. Carton Measurement:
LENGTH / WIDTH / HEIGHT / WEIGHTMINIMUM / 9"(22.9CM) / 6"(15.2CM) / 2"(5.1CM) / 3# LBS (1.36KG)
MAXIMUM: / 42"(107CM) / 24"(61CM) / 30"(76CM)) / 60# LBS(27.2KG)
4. Cardboard Quality: 175-200# Test Corrugated Cardboard.
5. Carton Bursting Test: 15 kgs/cm (Swire Inspection Standards -- Per Robert Lin fax dated 09/02/97)
6. Inners must be stacked vertically in the master carton.
7. The Owned Brand box sticker or price ticket must be facing up.
8. Assortment Pack orders: Started from 02/01/99, the first order shipment of the National/Licensed Brand (Not Target Ownd Brand) orders, every carton of this order must include extra 4 pcs Flat shoe boxes.
CASE MARKS
(A) MUSICAL PACK / (B) SOLID PACKTARGET STORES CARTON
P.O.# 0XXXXXX (7-digit) LABEL
DPC-ITEM# 0XX-0X-0XXX
STYLE#
COLOR: SIZE: (5-10)
CASE PACK: 6 (or 12,18)
MADE IN CHINA
CARTON# ___ OF ___
CARTON DIMENSIONS in CM
H= __cm / W=__cm / L=__cm / TARGET STORES CARTON
P.O.# 0XXXXXX (7-digit) LABEL
DPC-ITEM# 0XX-0X-0XXX
STYLE#
COLOR: SIZE: ( 6 )
CASE PACK: 6 (or 12,18)
MADE IN CHINA
CARTON# ___ OF ___
CARTON DIMENSIONS in CM
H= __cm / W=__cm / L=__cm
(C) ASSOREMENT PACK / PLS NTE FOLLOWING POINTS FOR ALL CASE MARK :
TARGET STORES CARTON
P.O.#: XXXXXXX (7-digit) LABEL
DPC-ITEM# 0XX-0X-0XXX
STYLE#
COLOR: SIZE: (5-10)
CASE PACK: 1
MADE IN CHINA
CARTON# ___ OF ___
CARTON DIMENSIONS in CM
H= __cm / W=__cm / L=__cm / ** REMOVE “ GENDER” from case mark. (5/11 e-mail from CE)
** 4/12/99 Inform the item#/size/pair no need to print anymore.
** Add two rows on the bttm of main & side mark:
CARTON DIMENSIONS in CM
H=__cm / W=__cm / L=__cm
** Add DPC-ITEM CARTON LBL on upper right hand corner
of adjacent side of carton.
** Add N.W. & G.W. information on side mark. (DU564-001)
1. LANDED ORDERS: Must print “STYLE CODE + SIZE CODE” under all case marks, other informations are the same as above.
2. The Case Marks should be printed on EACH of Main & Side Marks of carton. (One Vertical Side & one adjacent Vertical End), if the size of the carton does not allow this, the information may be placed on One Main Mark.
3. Print Specifications: The Size of print must be 3/16“(6mm) or Larger. Print Typeface must be BOLD.
SPECIAL INSTRUCTION:
1. LASTING TACK - PENALTY US$5,000 FOR EACH ITEM.
2. Sock label should be centered in shoe lining, factory must order SOCK LABEL from the supplier that buyer specified, i.e. ALKHAN.
3. For WIDE WIDTH patterns, print “WIDE WIDTH” on HEEL between SIZE & HEEL EDGE.
4. STUFFING CODE:
A. No Stuffing B. One Piece Pull Cardboard Stuffing
C. One Piece Paper Pull And Form Stick
H. Clam Shell Boxes For Pre-Walks or Hanging Boxed Presentation
I. J Hook, J Card or J Hook Package For Peg Presentation T. Tissue
** Effective from BTS/FALL99 all leather “casual” (non athletic) shoes are required to have 1 tissue wrap.
5. Target Softlines Owned Brands include Honors, Merona, Cherokee, Pro Spirit, Xhilaration, Utility, Circo, Lullaby Club, Gilligan & O‘Malley, GreatLand and Sostanza.
6. Effective January 1, 1998 Target will enforce a new Counterfeit Trim policy as follows:
In the event Target receives shipment with graphic tags or woven labels that have NOT been purchased from one of designated suppliers, Target shall, at its discretion, assess a penalty against the Vendor:
a) First offense - a penalty in the amount of $.15/unit for each incorrect graphic tag and $.30/unit for each incorrect woven label.
b) Second offense - a penalty in the amount of $1.00/unit for either an incorrect graphic tag or woven label and management review of the Vendor‘s status as a Target resource.
c) Third offense - a penalty in the amount of $2.00/unit for either an incorrect graphic tag or woven label and possible termination of the Vendor relationship.
7. TARGET DESIGNATED SUPPLIERS
Target has designated six suppliers to provide Price Tickets, Attachments, Size Strips, Box Stickers and Owned Brand Graphic Tags and Sock Labels to the vendors. Following is a summary of the products available from each supplier.
(1) SOABAR - Price tickets, attachments, graphic tags and size strips. Exclusive supplier of Merona, Pro Sprit, Gilligan & O‘Malley, Xhilaration graphic tags.
(2) ALKAHN - Woven labels. Exclusive supplier of Honors, Merona, Pro Spirit, Xhilaration, Utility and In Due Time woven labels.
(3) PAXAR - Price tickets, attachments, woven labels, graphic tags and size strips. Exclusive supplier of Honors Intimates, Lullaby Club, Starring Me! and Cherokee graphic tags and woven labels. Exclusive supplier of Gilligan & O‘Malley, Lullaby Club and 1998 Snowden woven labels. / Honors graphic tags.
(4) SHORE TO SHORE - Price tickets, attachments, graphic tags and size strips. Exclusive supplier of Utility & In Due Time graphic tags.
(5) PAX - Price tickets and attachments.
8. For all LACED athletic shoes - Laces MUST be tucked inside, not tied.
9. Print our FACTORY#“ on insole board for all the shoes.
10. LOADING CONTAINER
DHC Containers must be Loaded -- LEFT to RIGHT -- BOTTOM to TOP -- NOSE to TAIL -- of Container, PO#‘S and ITEM#‘S must FACE TAIL of Container, All Loads Must be STABILIZED. -- As Attachments (A & B)
11. Charge backs -- In the event that a shipment is late, incomplete, or miss-ticketed, the following charges will be incurred at the factory‘s expense:
a. Pos 1-3 days late may need to be air shipped to the U.S. If it does not air to the U.S., it may need to be air shipped from Target‘s Import DC to the Regional Dcs.
b. Pos 4+ days late must be air shipped.
c. Any goods being shipped after the ship/cancel window are subject to being canceled.
d. Partial shipments will result in a 2% charge back of the cost of the partial shipment in addition to air-freight charges incurred on the late portions of the PO.
e. Pos with incorrect item numbers, retails and/or unscannable UPCs will result in a charge back of $0.15 per unit on-hand and on-order for all items involved, as well as, a charge back of missed sales.
f. Any miss-ticketed item caught before shipping must be re-ticketed correctly prior to shipping. If this causes the PO to ship late, following the above rules for expediting the product.
12. Non-Compliance Charge backs:
Item / Charge backTicketing / US$ 0.15 per pair
Size Strips / US$ 0.15 per pair
Excess Packaging / US$ 0.20 per pair
Missing or Incorrect Shoe Box / US$ 0.35 per pair
Improperly Marked Cartons / US$ 0.25 per carton (Minimum)
Improperly Loaded Container / US$ 0.32 per carton (Minimum)
Late Documents / Deduct US$ 500.00 from L/C
13.Lately we HV sent trgt w/shts w/po# of 4 or 5 digits. Go ahead to add 0s in front of each # so they WL all be in 7 digits. (10/23/00 from DU928-202 CE)