009蓝牙MP3
M011 is a belt five buttons, with AUX, FM, USB, SD , and Bluetooth 2.0, 2.1 or 5.1 speaker with amplifier board .
Main components :
Master : ZQL2013
Module : ZQL6013
Electrical Specifications :
Working voltage: 5V
Output Power : 2 * 3W
First, the module features:
1, Support external signal switch directly .
2, Support Bluetooth3.0EDR
3, Support USB / SD / Bluetooth / FM / LINE switch automatically.
4 , The module containing MP3/WMA music decoder chip.
5, Support USB, SD, MMC card for playback.
6, Support USB / SD card switch , the song, the next song, fast forward , rewind , adjust volume , EQ, play / pause, stop , single repeat , mute , shutdown, elections songs.
7, Support Bluetoot previous song, next song, adjust volume , EQ, play / pause , mute, shut down.
8 , Support for FAT16, FAT32 file system.
9, Support MP1 Layer3, MP2 Layer3, MP3 Layer3 version of the song .
10 , Supports 32-320kbps MP3 songs .
11, Support power and memory : Memory song played before the power and volume .
Second, the panel buttons description：
1 , "": Set long press volume down ; in USB / SD / Bluetooth status short by the previous track ; in the FM state short press on a radio station .
2 , "": In USB / SD / Bluetooth state short press Play / Pause ; in the state press and Full Channel FM station search coexist units.
3 , "": Set long press volume up ; in USB / SD / Bluetooth state short press on a track ; short press a state in the FM radio .
4, "MODE": an SD card and U disk : switching order USB → SD → Bluetooth → FM → AUX; Only U disk : switching order USB → Bluetooth → FM → AUX; only SD card : switching sequence as SD → Bluetooth → FM → AUX; no USB and SD card : FM → AUX → Bluetooth.
5, EQ: pitch conversion ;
Third, the remote control button description：
1, POWER: standby (STANDBY) This button does not switch.
2, MODE: SD card and U disk : switching order USB → SD → Bluetooth → FM → AUX; Only U disk : switching order USB → Bluetooth → FM → AUX; only SD card : Switch the order of SD → Bluetooth → FM → AUX; no USB and SD card : FM → AUX → Bluetooth.
3, PREV: in USB / SD / Bluetooth status short by the previous track ; in USB / SD state long press to rewind the song ; in the FM state short press on a radio station , press scan to search on a radio station .
4, NEXT: In USB / SD / Bluetooth status short by the next track ; in USB / SD state long press to fast forward the song ; short press a state in the FM radio , press and sweep search for the next station.
5, VOL + :: Short / Long press for music plus .
6, VOL-: Short / Long press for music minus .
7, REP: USB / SD playback Repeat cycle and switching between all key boot for the entire cycle.
8, "STOP": in USB / SD state , short press to stop music playback.
9, MUTE: Mute button , click the mute, press the lift ( press VOL-/VOL + can also be released ) .
10, EQ: sound field mode . NORMAL → BAS → POP → ROC → JAZZ → CLA → CUT → NORMAL
11, PLAY / PAUSE: In USB / SD / Bluetooth status play / pause ; press the FM state for the whole channel search Taiwan coexist units.
12,0 ~ 9: USB / SD doing direct bond , more than 10 continuous input to choose the number you can ; doing in the FM state elections key, you can directly enter the radio frequency and channel number.
Fourth, the interface description :
Note:
(1) It is not a smart machine ( Andrews ) to enter a password , as well as the module 's power and signal ground are separated, the test of the two connected.
(2) This section does with call feature.
(3) The decoder box will damage the input voltage is too high , the voltage is too low , it will not work , be careful not to pick the wrong "+ " and " - " pole ;
(4) The Bluetooth module supports most phones, very few phones because of their different system unstable or may not be supported ;
5 Bluetooth device name of the product BT-Speaker