1. PREFACE
1.1 Orders are accepted in accordance with ArcelorMittal South Africa's General Conditions of Sale and prices VAT exclusive.
1.2 All prices and transport tariffs (road or rail) are subject to a settlement discount of 2,5%, provided payment is made in accordance with ArcelorMittal South Africa’s General Conditions of Sale.
1.3 All items are subject to “overage” and “underage”. Refer paragraph 3.2 (page 2).
1.4 Material addressed by this price list is sold at a price per metric ton (1000kg) on gross mass as recorded on the assized mass meter or weighbridge at the works.
1.5 Unless otherwise stated, extras or deductions quoted in this price list are per metric ton and each extra or deduction is separate and explicit.
1.6 Normal testing and inspection as outlined in the specifications are carried out. When additional inspection, testing or processing is required, extras will be charged.
1.7 Prices and extras or deductions and transport tariffs are those ruling on date of confirmed delivery and are subject to change without prior notice.
1.8 When placing orders, customers must always specify the end use and ensure that this is compatible with the ordered quality or specification. ArcelorMittal South Africa will then endeavour to deliver the material "fit for purpose". However, if the end use is in general terms such as "stock", or "general engineering", the product quality control will be in terms of the quality or specification only.
1.9 After orders have been accepted and confirmed, they cannot be cancelled in whole or in part or altered in any manner whatsoever, except by special agreement with ArcelorMittal South Africa in writing. Should an order be modified, the order as amended, it will be re-priced.
1.10 The publication of this price list does not place ArcelorMittal South Africa under any obligation to supply the quoted qualities and sizes at all times. Availability remains subject to confirmation and the stipulations in both the price list and relevant data sheets.
1.11 Before processing material, customers must ensure that it meets their requirements. Non-compliance in this regard may invalidate a claim. ArcelorMittal South Africa does not prescribe any particular checking or testing methods. Visual checks, simple dimensional checks and reference to test certificates and/or orders should be performed beforehand.
2. PRICE INFORMATION (Definitions)
2.1 ITEM
An item is a product of a single technical specification (i.e. a single quality, width, thickness, zinc coating specification, paint system, colour, coil size and packaging, surface finish or condition, and any additional processing parameters required or requested.)
2.2 ITEM EXTRAS
Item extras apply to the total number of full slab coils ordered per item for delivery in a given calendar month. (Note: All standard colours per standard substrate are combined for BTO item quantity)
(BTO = Best Ttonnage Ordered)
3. GENERAL INFORMATION
3.1 MINIMUM ORDER QUANTITY
The minimum quantity per item ordered shall be in accordance with the following:
Standard Items(Listed Standard qualities and dimensions with a Standard colour)
1 FULL-SLAB-COILS PER DIMENSIONAL SUBSTRATE
Total order quantity per dimensional substrate (colours combined) should be a multiple of the applicable nominal Full-slab-coil mass
PER COLOUR
The 1 Full-Slab-Coil-order may be split into any number of colours, the minimum per colour being one ½- paint line coil.
Order increments per colour should also be a multiple of ½-paint line coils.
3.2 OVERAGE & UNDERAGE
Chromadek:
< 20 ton ordered per colour: +2 ton / -2 ton
20 ton ordered per colour: +10% / -10%
Chromadek Ultim:
< 15 ton ordered per colour: +2 ton / -2 ton
15 ton ordered per colour: +15% / -15%
The principle of delivering the proceeds of full slab coils is applicable in all cases.
3.3 MASS OF COILS
3.3.1 Mass of individual coils:
Orders for coils with a specified exact mass will not be accepted.
Coils may be ordered to the nominal full painted coil mass as per ruling coil mass tables, or smaller split coils (half size).
Customers should indicate and check the maximum coil mass that can be handled, to ensure the correct selection from the available options.
Nominal mass options are shown in the coil mass table per width.
Tolerance on individual Coil mass:
Full mass coils:
Defined as coils with a mass of at least 75% and a maximum of 110% of the specified nominal mass as per ruling coil mass tables.
Light mass coils:
Defined as coils with a mass less than full mass coils, but at least 60% of the nominal mass as per ruling coil mass tables.
4. QUALITY EXTRAS
Specification / Available Slab Widths / Quality Code / R/t(VAT exclusive)
ISQ 230 / 1000; 1300 / 007 000 / 35
ISQ 300 ( 0,58mm) / 1000; 1300 / 005 000 / 90
ISQ 300 (> 0,58mm) / 1000; 1300 / 005 000 / 235
ISQ 550 (3T) (0,47; 0,50; 0,53; 58; 0,80mm) / 1000; 1300 / 006 001 / 235
ISQ 550 (0,30mm) Only Afri-Roof / 960 / 006 000 / 0
5. ITEM EXTRAS
5.1. ITEM EXTRA - ULTIM COLOUR RANGE
Item(Number of full slab coils) 1) / Standard items2)
R/t
(VAT exclusive)
1 - 2 / 410
3 / 270
4 / 0
5.2. ITEM EXTRA - OTHER COLOUR RANGES
Item / Standard items 2)(Number of full slab coils) 1) / R/ton (VAT exclusive)
1 / 520
2 / 410
3 / 270
4 / 0
5.3. ITEM EXTRA - OTHER COLOUR RANGES
Item / Standard items 2)(Number of full slab coils) 1) / R/ton (VAT exclusive)
5 / -140
6 / -280
Complexity cost – Other items subject to extra of R219 per ton in addition to the above item extra.
5.3 item extras: this is only applicable for standard items.
All standard-item orders equal to or more than 4 full slab coils will be invoiced on the basis of the best item extra band being R 0/tonne. The further item extra discounts for larger orders available in table 5.3 will be issued as a credit note at the end of the month. This credit will be determined using the actual volume of the item received during the month of confirmed order delivery.
Notes: 1) Refer to Annexure 2, (page 9) for applicable full slab coil mass according to width.
2) Refer to Annexure 1, (page 9) for applicable Standard items.
3) A minimum of one slab order quantity is required when ordering any combination of standard sizes as per Annexure1, (page 9) and non-standard colours as per paragraph 7.3 (page 6).
4) BTO (Best Tonnage Ordered):
a. Identical standard colour/standard item orders (using a standard item, as per page 8,quality, width, thickness & Zinc coating combination) will be combined when the BTO item extra is determined).
b. Identical other items (non-standard) will be combined when the BTO item extra is determined)
c. (a)and (b) above are therefore BTO’d separately.
5) A minimum of two slab order quantity is required i.r.o. “Other Colour Ranges-Other Items” irrespective
of substrate
“Other items” are:
a. All other quality/dimension combinations available in paragraph 4, but not listed as standard items
as per page 7, even though a standard paint colour is used.
b.Two-sided colour items are “Other (non-standard) Items”
6. WIDTH/THICKNESS EXTRAS
Thickness / Width (mm)(mm) / 914* / 925 & 940 / 1225 / 1250
R/t (VAT exclusive)
0,30 / 1795 / N/A / N/A / N/A
0,47 / N/A / 980 / 860 / N/A
0,50 / N/A / 895 / 775 / N/A
0,53 / N/A / 850 / 730 / 915
0,58 / N/A / 810 / 690 / 770
0,80 / N/A / 685 / 565 / 645
1,00 / N/A / 615 / 495 / 575
Notes: *) Only Afri-Roof
1) Dimensions are available in the above-mentioned width/thickness combinations only.
2) Listing of a price extra does not necessarily imply that the set of dimensions is available for all
qualities. Please refer to Datasheet and slab width availability per quality.
3) Full Hard material is only available in:
Quality - ISQ 550 (3T) code 006 001
Width - 925mm, 940mm & 1225mm
Thickness - 0,47mm, 0,50mm, 0,53mm & 0,58mm
7. PROCESSING EXTRAS
7.1 ZINC COATING EXTRAS
Zinc Coating DesignationThickness / Z100* / Z200
(mm) / R/t (VAT exclusive)
0,30* / 930 / N/A
0,47 / N/A / 1190
0,50 / 1120
0,53 / 1060
0,58 / 970
0,80 / 700
1,00 / 560
Notes: *) Only Afri-Roof
7. PROCESSING EXTRAS(continued)
7.2 CHROMADEK COLOUR COATING EXTRAS
ThicknessAfter
Galvanising
(mm) / Paint Options
Option 2 / Option 3 / Option 6
Top coat:
Chromadek colour range / Top coat:
Chromadek selected colour range / Top coat:
Afri-Roof
Back coat:
Single coat backer / Back coat:
Chromadek selected colour range / Back coat:
Afri-Roof
R/t (VAT exclusive)
0,30 / N/A / N/A / 1808
0,47 / 2035 / 2929 / N/A
0,50 / 1815 / 2696 / N/A
0,53 / 1673 / 2473 / N/A
0,58 / 1532 / 2250 / N/A
0,80 / 1166 / 1691 / N/A
1,00 / 942 / 1349 / N/A
Note: Option 2 are “Other items” (non-std items).
.
7.3 COLOUR ITEM EXTRA SURCHARGES (OTHER ITEMS)
Categories for Other items / ExtraR/ton (VAT exclusive)
Standard Item (Quality, Dimensions and Zinc coating) with a listed “Other
Available Colour” or Paint system (not a standard colour & standard paint
system)
(Minimum 1 full-slab-coil orders)
OR
Other available dimension, Zinc-coating and/or quality combination with a
Listed available colour (not a standard colour)
(Minimum 2 full-slab-coil orders) / 359
Note: Each Colour/dimension/quality combination will be considered as separate items for BTO
(Best Tonnage Ordered) purposes for the items depicted in paragraph 2 Option 3.
1 colour only per full slab coil for standard and non-standard items as per the stipulated minimum
8. PACKAGING EXTRA
Coil Size / ^Un-protectivePackaging:
Codes 06 & 07 *
R/t (VAT exclusive) / ^Advanced Protective Packaging:
#Code 41 & 32*
R/t (VAT exclusive) / ^Advanced Protective Packaging:
Code 42*
R/t (VAT exclusive)
½ Paint-Line-Coil / 0 / 425 / 228
Full-Paint-Line-Coil / 0 / 220 / 57
Note: *) Refer to Packaging Specification (Data Sheet) for code descriptions.
#) Code 41 & 32* available on enquiry only.
^) Packaging extra for 6ton coil same as ½ Paint Line-Coil.
9. STANDARD PAINT COLOURS
9.1 CHROMADEK - ROOFING
Colour range and Primer (top-side) and back side covered with a Single Coat Backer
Code / Name / Gloss / ArcelorMittal Ref.Number / Colour
Full coat
Top / Back
1722 / - / Fish Eagle White / 30% / N14128 / White
1724 / - / White Lion / 30% / N15010 / Cream
1024 / - / Sandstone Beige / 30% / N15365 / Beige
5327 / - / Gemsbok Sand / 30% / Y15366 / Beige
1029 / - / Buffalo Brown / 30% / N09412 / Brown
0021 / - / Kalahari Red / 30% / N06551 / Red (Oxide)
1578 / - / Azure Blue / 30% / Y01109 / Blue
2118 / - / Kingfisher Blue / 30% / Y01029 / Bright Blue
1744 / - / Umhlanga Wave / 30% / N02103 / Turquoise
1575 / - / Traffic Green / 30% / Y03002 / Green
0014 / - / Aloe Green / 30% / N03286 / Light Green
1577 / - / Charcoal Grey / 30% / Y13012 / Dark Grey
1576 / - / Dark Dolphin / 30% / Y13030 / Grey
2119 / - / Dove Grey / 30% / Y13637 / Light Grey
- / 1367 / Single Coat Backer /
Pebble Grey / 30% / B13049 / Off White
9. STANDARD PAINT COLOURS
9.2 AFRI-ROOF
Single colour coat on both sides, no primer
Code / Name / Gloss / ArcelorMittal Ref.Number / Colour
Full coat
Top / Back
0310 / - / Beachwood Brown / 30% / P 09451 / Brown
- / 0311 / Midnight Blue / 30% / P 01110 / Blue
0310 / - / Beachwood Brown# / 30% / P 09451 / Brown
- / 1367 / Pebble Grey / 30% / B13049 / Off White
OR
0312 / - / Palm Green / 30% / P 03312 / Green
- / 0313 / Cool Grey / 30% / P 13641 / Grey
Note: #) The above combination is available without enquiry (other available item).
10. OTHER AVAILABLE COLOURS / PAINT SYSTEMS (not standard colours)
Note: All items with these colours or colour combinations are “ Other Available
Items”, irrespective of the substrate.
10.1 CHROMADEK COLOUR RANGE ON ONE SIDE ONLY (Top) and with back side Single Coat backer
Code / Name / Gloss / ArcelorMittal Ref.Number / Colour
Full coat
Top / Back
1729 / - / Okavango Sunset / 30% / N06544 / Red
1740 / - / Bateleur Brown / 30% / N06545 / Red-Brown
1731 / - / Knysna Wilderness / 30% / N03304 / Dark Green
- / 1367 / Single coat backer / 30% / B13049 / Pebble Grey
Colour item extra surcharge paragraph 7.3 (page 5) applies (Non-std paint colour)
10.2 CHROMADEK COLOUR RANGE ON BOTH SIDES
Any combination of 2-sided colour on enquiry.
Only colours listed in paragraph 6 (page 4) will be considered.
Two Sided Colour combinations are “Other Available Items” i.e. non standard items, irrespective of substrate or colour (Non-std Paint System) and a minimum of two slabs required per order.