蔡建雄教授歷年著作一覽表

一 . 期刊論文

  1. Y. N. Wang, T. T. Lin, J. C. Leong,Y. T. Hsu, C.P. Yeh, P.H. Lee and C.H. Tsai*,”Numerical Investigation of High-Concentration Photovoltaic Module Heat Dissipation,”Renewable Energy,In press (2013) (SCI, IF=2.15) (corresponding author)
  2. Yao-Nan Wang, Jik Chang Leong, Jun-Yi Chen, Shiunn-Cheng Chuang, Chien-Hsiung Tsai*,”Reduction in Motorcyclist Pollutant Exposure Intensity by means ofOptimized Scooter front Fender and Vent Design,”Aerosol and Air Quality Research,(2013) In press (SCI, IF=)
  3. Wei-Hsin Chen, Shan-Wen Du, Chien-Hsiung Tsai, Zhen-Yu Wang,”Torrefied biomasses in a drop tube furnace to evaluate their utilityin blast furnaces,”Bioresource Technology, 111,pp. 433–438,(2012)(SCI, IF=)
  4. Cheng-Peng Yeh1、Shan-Wen Du、Chien-Hsiung Tsaiand Ruey-Jen Yang,”Numerical Analysis of Flow and Combustion Behavior in Tuyere and Raceway of Blast Furnace Fueled with Pulverized Coal and Recycled Top Gas,”,Energy 42 (2012) 233-240(SCI, IF=)
  5. Chien-Hsiung Tsai,Che-Hsin Lin,Lung-Ming Fu, Hui-Chun Chen,” High-performance microfluidic rectifier based on sudden expansion channel with embedded block structure,”BIOMICROFLUIDICS 6, 024108 (2012)(SCI, IF=)
  6. C-HTsai,C-P Yeh,C-H Lin,R-J YangL-M Fu,” Formation of Recirculation Zones in a Sudden Expansion Microchannel with a Rectangular Block Structure over a Wide Reynolds Number Range,” Microfluidics and Nanofluidics, Vol. 12, Numbers 1-4, pp.213-220,(2012)（SCI&EI, I.F.=2.241, 13/46：Nanoscience & Nanotechnology, 4/55：Instrument & Instrumentation）
  7. .-D. Tsai, Y.T. Hsu, T.T. Lin, L.-M. Fu, C.-H. Tsai, J.C. Leong,”Performance of an INER HCPV Module in NPUST,”EnergyProcedia,14, ICAEE 2011: pp893-898 December 2011, Bangkok, Thailand,(2012) (EI)
  8. C.-H. Tsai, J.-S. Kuo and J.C. Leong, “A Theoretical Analysis of MHD Couette Flow in Thin Cylindrical Annulus,” Advanced Science Letters (SCI; IF =)In Press (2012)
  9. WANG Yao-Nan, LIOU Ching-Liang, WU Ming-Chang, TSAI Chien-Hsiung*, FU Lung-Ming* ,”Rapid Detection of Methanol in an Integration Microfluidic Chip,”Key Engineering Materials Vol. 483 (2011) pp 364-369(EI)
  10. HONG Ting-Fu, LEONG Jik-Chang, LIN LIOU Long-Kai,TSAI Chien-Hsiung*, FU Lung-Ming*,”Magnetic Microfluidic Mixer,” Key Engineering Materials Vol. 483 (2011) pp 354-358(EI)
  11. LEE Chia-Yen, TAI Chang-Hsien, CHANG Chin-Lung, TSAI Chien-Hsiung,WANG Yao-Nan *, FU Lung-Ming*,”Numerical Simulation of Electromagnetic Actuator for ImpedancePumping,” Key Engineering Materials Vol. 483 (2011) pp 305-310(EI)
  12. TSAI C.-H., WANG Y.-N., TAI C.-H., MIAO J.-M., and LEONG J. C,”Effects of Heating Vents in a Tunnel-Type Dryer,” Advanced Materials Research Vols. 189-193, pp 1757-1760(EI)(2011)
  13. Lungming Fu, Chiufeng Lin, Chinlung Chang, Jenhao Chang, andChienhsiung Tsai*”Numerical Investigation into Thermal Behavior of Brushless Permanent Magnet Motors”Advanced Materials Research Vols. 199-200,pp 1518-1522(EI)(2011)
  14. Fu, L.M.,Tsai, C.H., Leong, K.P. and Wen, C.Y.* "Rapid Micromixer Via Ferrofluids" Physics Procedia, 9, 270-273, (2010). (SCI_E)
  15. Yeh, C. P.、Tsai, C.H.,Yang, R.J.*,”An Investigation into the Sheltering Performance of Porous Windbreaks under Various Wind Directions,” Journal of Wind Engineering and Industrial Aerodynamics,Vol. 98, Issues 10-11, pp.520-532 (SCI; IF =0.831) ,(2010)
  16. Hong, T.F., Ju, W.J., Leong, J.C., Tai, C.H.,Tsai, C.H.*,Fu, L.M.*, “Rapid Prototyping of PMMA Microfluidic Chips Utilizing a CO2 Laser,”Microfluidics and Nanofluidics, Vol. 9, No. 6,pp. 1125-1133,(SCI; IF =3.314) (2010)
  17. Wang, Y.H., Tsai, Y.W.,Tsai, C.H., Lee, C.Y.,Fu, L.M.*,” Design and Analysis of Impedance Pump Utilizing Electromagnetic Actuator,” Sensors,10, 4040-4052,(2010). (SCI; IF =1.870)
  18. Wen, C.Y., Lee, T.L.,Tsai, C.H., Fu, L.M.*, “Rapid Magnetic Microfluidic Mixer Utilizing AC electromagnetic Field,” Electrophoresis,30, 4179-4186,(2009). (SCI; IF =3.509)
  19. Hou, H. H.,Tsai, C.H., Fu, L.M.*,Yang, R.J.** ,”Experimental and Numerical Investigation into Micro-flow Cytometer with 3-D Hydrodynamic Focusing Effect and Micro-Weir Structure,”Electrophoresis,30, 2507-2515, (2009)
  20. Lee, C. Y., Hou,H. H., Tsai, C.H.*, Fu, L. M.,”Design and Characterization of MEMS-Based Flow-Rate and Flow-Direction Microsensor,” Microfluidics and Nanofluidics, 6, 363-371, (2009) (corresponding author)（SCI&EI, I.F.=2.241, 13/46：Nanoscience & Nanotechnology, 4/55：Instrument & Instrumentation）
  21. Tsai, C.H., Fu, L.M., Chang, C.L., Tai, C. H., Huamg, Y.L., Leong, J.C.,”Computational Aero-acoustic Analysis of a Passenger Car with a Rear Spoiler,” Applied Mathematical Modelling,33, 3661-3673, (2009)（SCI&EI, I.F.=0.572, 31/67：Engineering, Multidisciplinary）
  22. Lin, Che-HsinLee, Cheng-Yan,Tsai, C.H., Fu, Lung-Ming,” Novel Continuous Particle Sorting in Microfluidic Chip Utilizing Cascaded Squeeze Effect,”Microfluidics and Nanofluidics, 7, 499-508, (2009)（SCI&EI, I.F.=2.241, 13/46：Nanoscience & Nanotechnology, 4/55：Instrument & Instrumentation）
  23. Chen Wei-Chih, Hong Ting-Fu, Luo Wen-Bo, Tai Chang-Hsien,Tsai,C.H.*, Fu Lung-Ming,"Electrokinetic Instability Flow in Nanofilm-Coated Microcfluidic Channels" Journal of Advance Materials Research. Vol. 60-61, pp.300-303.(2009)(corresponding author)(EI)
  24. Hsi, C.L., Wang, T.Y., Tsai, C.H., Liu, C.H., Chang, Y.C., Kuo, J.T.,” Characteristics of Air-blown Fixed-bed Downdraft Biomass Gasifier,” Energy and Fuels, Vol. 22, pp 4196–4205 (2008).（SCI&EI）
  25. Fu, L.M., Hong, T. F., Wen, C. Y., Lin, C. H., Tsai, C.H.* ,”Electrokinetic instability effects in microchannels with and without nanofilm coatings,” Electrophoresis,Vol. 29, pp. 4871-4879, (2008)(corresponding author)（SCI&EI, I.F.=3.609, 6/70：Chemical, Analytical）
  26. Tsai, C.H.,Hou, H. H., Fu, L.M.,”An Optimal Three-Dimensional Focusing Technique for Micro-Flow Cytometers,” Microfluidics and Nanofluidics,Vol:5, pp. 827–836, (2008)（SCI&EI, I.F.=2.241, 13/46：Nanoscience & Nanotechnology, 4/55：Instrument & Instrumentation）
  27. Chang, C.L., Hou, H. H., Fu, L.M.,Tsai, C.H. *,” A Low-Leakage Sample Plug Injection Scheme for Cross-Form Microfluidic CE Devices Incorporating a Restricted Cross-Channel Intersection,” Electrophoresis,29,3135-3144, (2008) (corresponding author)（SCI&EI, I.F.=3.609, 6/70：Chemical, Analytical）
  28. Tsai, C.H. *,”The Asymmetric Behavior of Steady Laminar Flame Propagation in Ducts,” Combustion Science and Technology, Vol. 180, 3 , pp. 533 - 545, (2008)（SCI&EI, I.F.=0.984, 15/67：Engineering, Multidisciplinary）
  29. Fu, L.M.,Tsai, C.H. *, and Lin, C. H.,”A High-Discernment Micro-Flow Cytometer with Micro-Weir Structure,”Electrophoresis, 29, 1874-1878, (2008)(corresponding author)（SCI&EI, I.F.=3.609, 6/70：Chemical, Analytical）
  30. Chen, H.H., Huang, T.C., Tsai, C.H., Mujumdar,A.S.,”Development and Performance Analysis of a New Solar Energy-Assisted Photocatalytic Dryer,”Drying Technology,Vol. 26, pp. 503~507, (2008)（SCI&EI, I.F.=1.171, 14/107：Engineering, Mechanical）
  31. Tsai, C. H., Lin, C.H., Luo, W.B., Leong, J.C., Liu, Z.J.,Fu, L. M., “Rapid Analysis of Formaldehyde in Food Utilizing Microfluidic Mixer Chip,”Journal of Functional Materials and Devices,14, 367-371, (2008) (EI)
  32. Lao, W.B.,Leong, J.C.,Tsai, C. H., Lin., C.H., Fu, L. M., “Micro Flow Cytometer with 3-D Focusing for Cell/Particle Detection,”Journal of Functional Materials and Devices,14, 436-440, (2008) (EI)
  33. Chang, C.L., Tai, C.H.,Tsai, C.H., Wang, Y.R.and Hon, Q.S., ” Numerical Simulation of Ventilation System Within an Armored Vehicle Cabin,” Journal of Flow Visualization Image Processing, Vol. 14, pp. 201–223, (2007) (EI)
  34. Leong, J. C., Tsai, C. H.,Fu, L. M.,“Design of High-resolution Analysis Technique for Capillary Electrophoresis Microchip,” Japanese Journal of Applied Physics,Vol. 46, No. 10A, 2007, pp. 6865–6870, (2007)（SCI&EI, I.F.=1.247, 50/94：Physics, Applied）
  35. Leong, J. C., Tsai, C. H.,Chang, C. L., Fu, L. M., Lin,C. F.,”A Rapid Microfluidic Mixers Utilizing Dispersion Effect and Interactively Time-Pulsed Injection,” Japanese Journal of Applied Physics, Vol. 46, pp.5345-5352,, (2007)（SCI&EI, I.F.=1.247, 50/94：Physics, Applied）
  36. Fu, L. M.,Leong, J. C., Lin,C. F., Tai, C. H.,Tsai, C. H. *,”High Performance Microfluidic Capillary Electrophoresis Devices,” Biomedical Microdevices, Vol. 9, pp.405-412, (2007) (corresponding author)（SCI&EI, I.F.=3.073, 5/44：Engineering, Biomedecial, 8/46：Nanoscience & Nanotechnology）
  37. Fu, L. M.,Tsai, C. H. *, “Design of Interactively Time-Pulsed Microfluidic Mixers in Microchips using Numerical Simulation,” Japanese Journal of Applied Physics,Vol. 46, No.1 , pp.420-429,(2007) (corresponding author)（SCI&EI, I.F.=1.247, 50/94：Physics, Applied）
  38. Lin. C. H.,Tsai, C. H. *, Pan, C.W.and Fu,L. M., “Rapid Circular Microfluidic Mixer Utilizing Unbalance Driving Force,” Biomedical Microdevices,Vol. 9,pp.43-50 , (2007)(corresponding author)（SCI&EI, I.F.=3.073, 5/44：Engineering, Biomedecial, 8/46：Nanoscience & Nanotechnology）
  39. Tsai,C. H., Chen, H.T., Wang,Y.N.,Lin, C.H. and Fu, L. M.,“Capabilities and Limitations of 2-Dimensinal and 3-Dimensional Numerical Methods in Modeling the Fluid Flow in Sudden Expansion Microchannels,” Microfluidics and Nanofluidics,Vol. 3, pp.13-18 , (2007)（SCI&EI, I.F.=2.241, 13/46：Nanoscience & Nanotechnology, 4/55：Instrument & Instrumentation）
  40. Huang, M. Z., Yang, R. J., Tai, C. H., Tsai, C. H. *, Fu,L. M.,” Application of electrokinetic instability flow for enhanced micromixing in cross-shaped microchanne,” Biomedical Microdevices,Vol 8, pp. 309-315 , (2006) (corresponding author)（SCI&EI, I.F.=3.073, 5/44：Engineering, Biomedecial, 8/46：Nanoscience & Nanotechnology）
  41. Fu, L. M., Tai,C.H., Tsai, C. H., Lin,C.H., Lee, C.Y.,”Fabrication of Micromixers Utilizing Shedding Effect Induced by Electrokinetic Instability,” Journal of Physics: Conference Series 34, pp. 45–50, (2006) (EI)
  42. 蔡建雄,侯輝雄,傅龍明, “微管道流場之二维和三维涡漩仿真分析,” 北京科技大學學報, 第28卷,(2006) (EI)
  43. 蔡循恒,蔡建雄,張金龍,朱尉琮,林秋豐,”一种簡易的指纹辨識方法,”北京科技大學學報, 第28卷,(2006)(EI)
  44. 葉承朋,張金龍,梁智創,蔡建雄*,”機車排氣管之數值模擬分析,” 北京科技大學學報, 第28卷,(2006) (corresponding author)(EI)
  45. Tai, C. H., Yang, R. J., Huang, M. Z., Liu, C. W. Tsai, C. H. * and Fu, L. M., “Micromixer Utilizing Electrokinetic Instability-Induced Shedding Effect,” Electrophoresis,27, 4982-4990, (2006) (corresponding author)（SCI&EI, I.F.=3.609, 6/70：Chemical, Analytical）
  46. Tsai, C. H., Hung, M. F., Chang, C. L., Chen, L. W. and Fu, L. M., “Optimal Configuration of Capillary Electrophoresis Microchip with Expansion Chamber in Separation Channel,” Journal of Chromatography A, 1121, pp.120~128, (2006)（SCI&EI, I.F.=3.641, 5/70：Chemistry, Analytical）
  47. Tsai, C.H., Wang, Y. N., Lin, C. F., Yang, R. J., and Fu,L.M.,”Experimental and Numerical Investigation into Leakage Effect in Injectors of Microfluidic Devices,”Electrophoresis, 27, 4991-4998, (2006)（SCI&EI, I.F.=3.609, 6/70：Chemical, Analytical）
  48. Lee, C. Y., Tsai, C. H., Chen, L. W., Fu, L. M. and Chen, Y. C., “Elastic-Plastic Modeling of Heat-Treated Bimorph Micro-Cantilevers,” Journal of Microsystem Technologies,12, pp. 979~986,(2006)（SCI&EI, I.F.=0.912, 97/227：Engineering, Electrical & Electronic）
  49. Chen, L. W., Lee, C. Y., Tsai, C. H.,and Chen, Y. C., “Thermal Contact Residual Stress Analysis of Elastic-Plastic Bilayer Micro-Cantilevers with Platinum Electrodes,” Journal of Material Science Forum,Vol. 505-507, 559-564(2006)（SCI&EI, I.F.=0.399, 10/122：Mechanics, 137/178：Materials Science）
  50. Lee, C.Y., Lin, C.F., Hung, M.F., Ma, R. H., Tsai, C. H., Lin, C.H., Fu, L.M.,“Experimental and Numerical Investigation into Mixing Efficiency of Micromixers with Different Geometric Barriers,”Journal of Material Science Forum,Vol. 505-507, 391-396 (2006) （SCI&EI, I.F.=0.399, 10/122：Mechanics, 137/178：Materials Science）
  51. Wang, Y.N., Lin, C.F., Wu, S.T., Chang, C.L., Chen, H.T., Tsai, C.H. and Fu, L.M.,” Experimental Investigation of High-resolution Injection Technique in Microfluidic Chips,” Journal of Material Science Forum,Vol. 505-507, 409-414 (2006)（SCI&EI, I.F.=0.399, 10/122：Mechanics, 137/178：Materials Science）
  52. Tsai, C. H., Tai, C. H., Fu, L. M. and Wu, F. B.,“Experimental and Numerical Analysis of the Geometry Effects of Low-Dispersion Turns in Microfluidic Systems,”Journal of Micromechanics and Microengineering,15,377–385. (2005)（SCI&EI, I.F.=1.930, 10/122：Mechanics, 7/55：Instrument & Instrumentation）
  53. Lin, C. H.,Tsai, C.H. *,and Fu, L.M., “A Rapid 3-Dimensional Vortex Micromixer Utilizing Self-Rotation Effect under Low Reynolds Number Conditions,” Journal of Micromechanics and Microengineering, 15, 935–943. (2005) (corresponding author)（SCI&EI, I.F.=1.930, 10/122：Mechanics, 7/55：Instrument & Instrumentation）
  54. Tsai, C. H., Yang, R. J., Tai, C. H. and Fu, L. M., “Numerical Simulation of Electrokinetic Injection Techniques in Capillary Electrophoresis Microchips,”Electrophoresis, 26,674-686 , (2005)（SCI&EI, I.F.=3.609, 6/70：Chemical, Analytical）
  55. 林秋豐,洪敏發,曾全佑,蔡建雄*,戴昌賢,藍浚嘉, “雨刷系統流場的數值分析與研究,”技術學刊,第二十卷, (2005)(corresponding author)
  56. 曾全佑,蔡建雄*,林秋豐,戴昌賢,吳賦斌, “柴油引擎噴射系統故障與噴射壓力波形之關聯性,”技術學刊,第二十卷, 第一期, pp.7-14, (2005) (corresponding author)
  57. Hsu, U. K., Tai, C. H. and Tsai, C. H., “All Speed and High-Resolution Scheme Applied to Three-Dimensional Multi-Block Complex Flowfield System,” Chinese Journal of Mechanics-Series A., Vol. 20, No. 1, pp.21-33, (2004)(SCI)
  58. 林秋豐,曾全佑,蔡建雄, “柴油車黑煙排放總量之研究,”技術學刊, 第十八卷, 第三期, (2003)
  59. Tsai, C. H., and Lee, S. T., “Flame Propagation in a Rotating Tube, ” Journal of the Chinese Institute of Engineers, Vol. 23, pp.687-695, (2000)（SCI&EI, I.F.=0.183, 60/67：Engineering, Multidisciplinary）
  60. Lee, S. T. and Tsai, C. H., “Numerical Investigation of Steady LaminarPremixedFlame Propagation in a Circular Tube,” Combustion and Flame, Vol. 99, pp.484-490, (1994) （SCI&EI, I.F.=2.184, 4/67：Engineering, Multidisciplinary）
  61. Tsai, C. H., and Lee, S. T., “Transient Burning of a Solid Fuel,” Journal of the Chinese Society of Mechanical Engineers, Vol. 14, No.3, pp.280~188, (1993)------ EI

二 . 研討會論文

1.J.C. Leong, Y.T. Hsu, T.T. Lin , L.-M. Fu,C.-H. Tsai, B.-D. Tsai,” On-site Measurement of a HCPV Module in NPUST,”2011 The International Conference on Green Technologies,October 12~15, 2011, Taiwan

2.Chien-Hsiung Tsai, Yao-Nan Wang, Chyuan-Yow Tseng , Chiu-Feng Lin and Chin-Lung Chang,”Numerical Investigation into Thermal analysis of Brushless Permanent MagnetMotors,”The 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & ExhibitionEVS-25 Shenzhen, China, Nov. 5-9, 2010

3.C.P.Yeh, T.T.Lin, H.T. Pu, R.J. Yang and C.H. Tsai,” An investigation into the passive cooling of photovoltaic cells under concentrated illumination,”The 21st International Symposium on Transport Phenomena,2-5 November, 2010, Kaohsiung City, Taiwan

4.LM Fu, CH Tsai, KP Leong, CY Wen,” Rapid Micromixer Via Ferrofluids.” The 12th International Conference on Magnetic Fluids (ICMF12), Sendai, Japan 1-5, August, 2010.

5.HC Chen, CH Tsai, LM Fu*, CH Lin, “High performance microfluidic rectifier utilizing self-induced virtual valvesin a sudden expension channel with a block structure, The 23th IEEE International Conference on Micro Electro Mechanical Systems (IEEE-MEMS 2010), Hong Kong, January 24 - 28, 2010.

6.CH Tsai, MX Wang, CH Tai, LM Fu*, “Experimental and Numerical Investigation into Micro-flow Cytometer with 3-D Hydrodynamic Focusing Effect,” The 8th Asian Computational Fluid Dynamics Conference (ACFD2010), Hong Kong, 10-14 January, 2010.

7.蔡建雄，陳君驛，2010，「機車尾流對排氣管廢氣散逸之影響」中華民國第十五屆車輛工程學術研討會， 南台科技大學機械工程系，台灣台南，11月26日

8.黃柏源，王政揚，蔡建雄，2010，「提升水流中擾流現象之裝置」中華民國第十五屆車輛工程學術研討會， 南台科技大學機械工程系，台灣台南，11月26日

9.蔡建雄，楊嘉豪，2010，「機車油冷式排(散)熱管模擬分析」中華民國第十五屆車輛工程學術研討會， 南台科技大學機械工程系，台灣台南，11月26日

10.蔡建雄，李朋勳，2010，「聚光型太陽能電池內流體不對稱性流場分析」中華民國第十五屆車輛工程學術研討會， 南台科技大學機械工程系，台灣台南，11月26日

11.蔡建雄，黃詠竣，2010「空調佈置對於書房汙染物的影響」中華民國第十五屆車輛工程學術研討會，南台科技大學機械工程系，台灣台南，11月26日

12.Leong, J .C. Lee, J. S. Chen, C.D. and Tsai, C. H.*,” Investigation of Windbreak Fence Effectivenesson Dust Depression,” TAIWAN 2008 International Steel Technologies Symposium (2008)

13.CH Tsai, Lee, C.Y.,Chang, C.L., Tai ,C.H., Fu ,L.M., ”Development of High-performance Detection Method for CE Microchips,” 5th International Symposium on Instrument Science and Technology (ISIST2008), Shenyang, China, September 15~18, (2008).

14.Tsai C. H., Lin, C. F., Tseng, C. Y., Fu, L. M., ”Development of High-Discernment Micro-Flow Cytometer,” 5th International Symposium on Instrument Science and Technology (ISIST2008), Shenyang, China, September 15~18, (2008).

15.蔡建雄,許智倫,周志明,張翔宇,郭景宗,” 生質燃料氣化爐與史特靈引擎之熱電共生系統研究,”2008中國生物質能發展論壇, 北京(2008)

16.杜憲文,蔡建雄,曾懿銓“模擬高爐熱風操作下粉煤燃燒行為之探討”；第18 屆燃燒學術研討會, (2008)

17.陳韋志,蔡建雄,林哲信,傅龍明, “Micro flow cytometer with 3-D focusing for cell/particle detection.” The Conference on Precision Machinery and Manufacturing Technology 2008. (2008精密機械與製造技術研討會), Kenting, May 23-25, (2008).

18.李泰龍,蔡建雄,李佳言,傅龍明,”Enhancing characteristics of gas sensors with NiO thin film.” The Conference on Precision Machinery and Manufacturing Technology 2008. (2008精密機械與製造技術研討會), Kenting, May 23-25, (2008).

19.侯輝雄,蔡建雄,李佳言,傅龍明, “Numerical simulation of micro cantilever-based flow meter for high gas flow velocity Measurement.” The Conference on Precision Machinery and Manufacturing Technology 2008. (2008精密機械與製造技術研討會), Kenting, May 23-25, (2008).

20.鄒忠明,蔡建雄,林哲信,傅龍明, “Analysis of electrokinetic instability in microfluidic systems.” The Conference on Precision Machinery and Manufacturing Technology 2008. (2008精密機械與製造技術研討會), Kenting, May 23-25, (2008)

21.朱偉中,蔡建雄,林哲信,傅龍明, “ Rapid analysis of formaldehyde in food utilizing microfluidic mixer chip.” The Conference on Precision Machinery and Manufacturing Technology 2008. (2008精密機械與製造技術研討會), Kenting, May 23-25, (2008).

22.陳惠君,傅龍明,蔡健雄,林哲信,”阻塊於微流體突擴管道中低壓漩渦生成效應之分析,” (2008精密機械與製造技術研討會), Kenting, May 23-25, (2008).

23.侯輝雄,蔡建雄, 林哲信, 傅龍明, ”具有三維聚焦之微型流式細胞/顆粒計數儀,” 2007中華民國航太學會學術研討會, NPUST, Pingtung, November 16, ( 2007)

24.蔡建雄, 林哲信, 劉展冏, 傅龍明, “應用微流體混合器晶片於食品中甲醛含量快速檢測,” 2007中華民國航太學會學術研討會, NPUST, Pingtung, November 16, ( 2007)

25.何順暉,蔡建雄,戴昌賢,陳炎洲,徐子圭,”氫氣重組之模擬研究分析,” 2007中華民國航太學會學術研討會,( 2007)

26.蔡建雄,張明豪“家禽類建築物自然通風系統風擋效應之影響,” 2007中華民國航太學會學術研討會, ( 2007)

27.杜憲文,蔡建雄,曾懿銓“以沉降管反應爐評估粉煤之燃燒率,”第十二屆車輛工程學術研討會, ( 2007)

28.蔡建雄,葉承朋“機車觸媒單通道流場之數值模擬分析,”第十二屆車輛工程學術研討會, ( 2007)

29.蔡建雄,蘇振權“史特靈引擎流場之數值模擬與研究,”第十二屆車輛工程學術研討會, ( 2007)

30.曾全佑蔡建雄許智翔“使用中機車觸媒效率測試,”第十二屆車輛工程學術研討會, ( 2007)

31.His, C. L.,Tsai, C. H,, Wang, T. Y., Liu, C. H., and Kuo, J.T.,” Characteristics of Air-blown Gasification for Woods in a Fixed-bed Downdraft Gasifier,”International Conference on Power Engineering-2007, October 23-27, 2007, Hangzhou, China, ( 2007)

32.Lao, W. B., Leong, J. C., Tsai, C. H., Lin, C. H., Fu L. M., ” Three-Dimensional Focusing Technique for Micro-Flow Cytometers,” 9th Annual Domestic Conference of Micro-Nano Technology, ShangHai, China, September 20-22,( 2007).

33.Leong , J. C., Tsai, C. H., Chang, C. L., Fu, L. M., Lin, C. H., Tai, C. H., “Rapid Formadehyde detection system in Foods,” 9th Annual Domestic Conference of Micro-Nano Technology, ShangHai, China, September 20-22, ( 2007).

34.Lin, C. H.,Tsai, C. H., Lin, C. F., Fu, L. M., Tai, C. H., “Experimental Investigations into Electrokinetic Instability Phenomena in Nanofilm-Coated Microcfluidic Channels,” International Conference on Nanoscience & Technology, ChinaNANO 2007, Beijing, China, June 4-6.

35.Chen, H. H., Huang, T. C. and Tsai, C. H., “Dehydration of Agri-food Materials by the Concept of Green Drying,” RENEWABLE ENERGY 2006, 9-13 October, 2006 MakuhariMesse, Chiba, Japan, Best paper Award(2006)

36.連一洋,蔡建雄,姜庭隆,蘇振權,”人道撲殺裝置之設計與數值模擬分析,” 中國機械工程學會第二十三屆全國學術研討會, 台南, (2006)

37.張金龍,梁智創,蔡建雄,葉承朋,”機車排氣管之數值模擬分析,”中國機械工程學會第二十三屆全國學術研討會, 台南, (2006)

38.梁智創,蔡建雄,潘志文,何忠根,蔡辛慈,”高爐鼓風嘴流場之特性分析與研究,”中國機械工程學會第二十三屆全國學術研討會, 台南, (2006)

39.Hsu, C. C.,Tsai, C. H., Lin, C. H. and Fu, L. M., “Passive Microfluidic Mixers with Different Geometric Barriers,” The 30thNational Conference on Theoretical and Applied Mechanics, DYU, Changhwa, Taiwan,December 15-16, 2006.

40.Pan, C. J., Tsai, C. H., Lin, C. H., Chang, C. L.andFu, L. M.“Rapid Circular Microfluidic Mixer,” The 30thNational Conference on Theoretical and Applied Mechanics, DYU, Changhwa, Taiwan,December 15-16, 2006.

41.Lin, C. C., Tsai, C. H. andFu, L. M., “Application of Electrokinetic Instability Flow in Microfluidic Mixer,” The 30thNational Conference on Theoretical and Applied Mechanics, DYU, Changhwa, Taiwan,December 15-16, 2006.

42.Hou, H. H.,Tsai, C. H. andFu, L. M., “Leakage Effectin Injectors of Capillary Eelectrophoresis Microchips,” The 30thNational Conference on Theoretical and Applied Mechanics, DYU, Changhwa, Taiwan,December 15-16, 2006.

43.Lee, C. Y.,Tsai, C. H.,Lin, C. F. and Fu, L. M., “Development of semicircular micro-detector in microfluidic biochip, ” International Conference on Bio-Nano-Informatics Fusion & International Forum on Biochip Technologies 2006 (BNI&IFBT2006),” Beijing, China, October 9-12, 2006

44.Su, Y.D., Tsai, C. H., Lee, C.Y. and Fu, L. M., “Development of high-performance biosensor for capillary electrophoresis microchip,” 2006 USTB-NPUST International Conference, Beijing, China, July 1-3, 2006.

45.Huang, M.Z., Yang, R.J., Tai, C.H., Tsai, C. H., and Fu, L. M., “Application of instability of electrokinetic flows for enhanced micromixing in cross-shaped microchannel,” 2006 USTB-NPUST International Conference, Beijing, China, July 1-3, 2006.

46.Lee, C. Y., Lin, C. H., Tsai, C. H.and Fu, L. M., “Design and Fabrication of Contactless Capacitive-Type Detector for Microchip Capillary Electrophoresis,” International MEMS Conference (iMEMS2006), Singapore, May 9-12, 2006.

47.Fu, L. M.,Tai, C.H.,Tsai, C. H.,Lin, C. H. and Lee, C. Y., “Fabrication of Micromixers Utilizing Shedding Effect Induced by Electrokinetic Instability,” International MEMS Conference (iMEMS2006), Singapore, May 9-12, 2006

48.Tsai, C. H., Lee, C. Y. and Fu, L. M.,“Numerical Simulation of High-resolution Analysis Technique in Capillary Electrophoresis Microchip,” The 13th National on Computational Fluid Dynamics, Taipei, August 17-19, 2006.

49.Su, Y. D.,Tsai, C. H., Lee, C. Y., and Fu, L. M., “Development of high-performance detector for CE microchip, The 4th Conference on Precision Machinery and Manufacturing Technology-(2006精密機械與製造技術研討會), Kenting, May 26-28, 2006.

50.Zhong, Y. M., Tsai, C. H.,Chang, C. L. and Fu, L. M., “High-resolution Analysis Technique for CE Microchip,” The 4th Conference on Precision Machinery and Manufacturing Technology-(2006精密機械與製造技術研討會), Kenting, May 26-28, 2006.

51.Huang, M, Z., Yang, R. J., Tai, C. H., Tsai, C. H. and Fu, L. M., “Rapid microfluidic mixer utilizing electrokinetic instability flow,” The 4th Conference on Precision Machinery and Manufacturing Technology-(2006精密機械與製造技術研討會), Kenting, May 26-28, 2006.

52.Tsai, C. H., Lee, C. Y., Tai, C. H., Tseng, C. Y. and Fu, L. M., ” Numerical Simulation of High-resolution Analysis Technique in Microfluidic Chips,” The First Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS 2006), Zhuhai, China, 18-21 Jan ( 2006)

53.Tsai, C. H., Wang, Y. N., Lee, C. Y., Lin, C. F., Tai, C. H. and Fu, L. M.,” Numerical and Experimental Analysis into 2-Dimensinal and 3-Dimensional Effects of Flow Field in a Sudden Expansion Microchannel,” The First Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS 2006), Zhuhai, China, 18-21 Jan (2006)

54.Tsai, C. H., Hu, H., Lu, Z. Y., “An Investigation of Ultralight Aircraft Propeller Design – (I) Aerodynamic Analysis” AASRC/CCAS Joint Conference, Kaohsiung, Taiwan, (December, 2005).

55.Hu, H., Tsai, C. H., Kuo, H. E., Wang, J., “An Investigation of Ultralight Aircraft Propeller Design – (II) Structural Analysis” AASRC/CCAS Joint Conference, Kaohsiung, Taiwan,(December, 2005)

56.Chen, L. W., Lee, C. Y., Tsai, C. H.and Chen, Y. C., “Thermal Contact Residual Stress Analysis of Elastic-Plastic Bilayer Micro-Cantilevers with Platinum Electrodes,” Proceedings of ICAM2005: International Conference on Advanced Manufacture Nov 28 – Dec 2, Taipei, Taiwan, (2005)

57.Lee, C. Y., Chang, C.L., Ma, R.H.,Tsai, C. H., Lin. C. H. and Fu, L. M.,“Numerical Analysis into the Mixing Performance of Electrokinetically Pulsatile Microfluidic MixersInteractively Time-Pulsed Microfluidic Mixers in Microchips,”Proceedings of ICAM2005: International Conference on Advanced Manufacture Nov 28 – Dec 2, Taipei, Taiwan, (2005)

58.Lee, C. Y., Lin, C. F., Hung,M.F., Tsai, C. H., Lin. C. H. and Fu, L. M.,“Experimental and Numerical Investigation into Mixing Efficiency of Micromixers with Different Geometric Barriers,” Proceedings of ICAM2005: International Conference on Advanced Manufacture Nov 28 – Dec 2, Taipei, Taiwan, (2005)

59.Wang, Y. N., Wu, S. T., Chen, H. T., Tsai,C.H., Lin, C.H. and Fu, L.M.,” Experimental Investigation of High-resolution Injection Technique in Microfluidic Chips,” Proceedings of ICAM2005: International Conference on Advanced Manufacture Nov 28 – Dec 2, Taipei, Taiwan, (2005)

60.Tsai, C. H., Leong, J. C. and Tai, C. H., “The Asymmetric Behavior of Flame Propagation inside Tubes,” The Sixteenth International Symposium,on Transport Phenomena (ISTP-16), Prague, Czech Republic, (2005)

61.Leong, J. C., Tsai, C. H. and Tai, C. H., “Couette Flow in a Partially Porous Curved Channel Which is Slightly Eccentric,” The Sixteenth International Symposium,on Transport Phenomena (ISTP-16), Prague, Czech Republic, (2005)

62.Wang, Y. N., Lin, C. H., Tsai, C. H. andFu, L.M., ”Capabilities and Limitations of 2-Dimensinaland 3-Dimensional Numerical Methods in Modeling the Fluid Flow in Sudden Expansion Microchannels,” The 29thNational Conference on Theoretical and Applied Mechanics, NTHU, Hsinchu, Taiwan,December 16-17, 2005.

63.Fu, L. M., Tai, C. H., Tsai, C. H., Yang, R. J. andLin, C. H., “A Rapid DNA Digestion System Utilizing a High-Throughput Microfluidic Mixer,” The 12th National on Computational Fluid Dynamics, Kaohsiung, Taiwan, August 19-21, 2005.

64.Fu, L.M., Yang, R. J.,Lin, C. H.,Tsai, C. H. and Hsu, K. L., “Numerical and Experimental Analysis into 2-Dimensinal and 3-Dimensional Effects of Flow Field in a Sudden Expansion Microchannel,” The 12th National on Computational Fluid Dynamics, Kaohsiung, Taiwan, August 19-21, 2005.

65.蔡建雄,鄭文欽”抽風扇應用於室內之流場分析”第十二屆CFD研討會Kaohsiung, Taiwan, August 19-21, 2005

66.戴昌賢,蔡建雄,林志儒,”汽車車內外輻射熱流場耦合分析” 第十二屆CFD研討會Kaohsiung, Taiwan, August 19-21, 2005

67.Lee, C. Y., Fu, L. M., Tsai, C. H., Chen, L. W. and Chen, Y. C., “Elastic-Plastic Modeling of Heat-Treated Bimorph Micro-Cantilevers”, Symposium on Design, Test, Integration and Package of MEMS/MOEMS 2005, Jun. 1-3, Montreux, Switzerland, (2005)

68.Lin, C. H., Tsai, C. H. and Fu, L. M., “Electrokinetic Injection Techniques in Capillary Electrophoresis Microchips,” The 28th Conference on Theoretical and applied Mechanics, Taipei, 3-4 December, (2004)