Working with Math Content Using JAWS with the BrailleNote and the Braille Sense
CTEBVI Conference March 21, 2015
Presenter: Robert Sweetman.
Sweetman Systems
Phone: 818-893-5887.
Email: .
Introduction
Nemeth Braille on the BrailleNote Apex
Visual Output for the Apex
The Nemeth Tutorial
Writing Nemeth on the Apex.
Printing Your Assignment.
Exporting Your Document to a USB Flash Drive
Nemeth Translation Abbreviations Guide
Nemeth Braille on the Braille Sense
Using Nemeth Mode
Deleting Items When Writing in Nemeth mode.
Writing a Sample Homework File
Exporting the Braille document to Doc Format
Finished Homework
JAWS 16 Supports MathML.
Implications for the Future
Introduction
In this presentation, I will discuss options that are available for using Nemeth on the BrailleNote and the Braille Sense. I will then explain how students can prepare Nemeth content on both devices, as well as preparation of documents that can be read by the teacher or transcriber.I will then demonstrate use of JAWS for reading math content both in Microsoft Word and on the internet.
Nemeth Braille on the BrailleNote Apex
The current version of Keysoft, (version 9.41), allows students to prepare Nemeth Braille in a word processing document and print it to a printer or save it to a document that can be imported into Microsoft Word. It also includes a very extensive tutorial that explains the Nemeth code, shows students how to read Nemeth Braille, and contains exercises that teach students to write Nemeth Braille correctly.
Visual Output for the Apex
To assist teachers, the Apex can provide visual output to a monitor, or to an iPad using VNC Viewer. For this presentation, we will use a monitor as monitors are inexpensive and widely available.
Connect a monitor to the VGA port on the back edge of the Apex and turn it on.
On the Apex, press Spacebar+O for the options menu.
Press V for Visual Display.
Press V again to choose VGA output; then press Enter.
The user will be returned to the Main Menu, and visual output will appear on the monitor.
The Nemeth Tutorial
To get started, press Spacebar+Dots1,2,3,4,5,6 to open the main menu.
Now, press the letter x to open a list of Keysoft extensions.
Tap the Spacebar to select Nemeth Tutorial, then press Enter. The table of contents for the Nemeth tutorial will open.
Press Enter to open the first assignment.This assignment consists of an activity menu that explainshow to use the numeric indicator.
Each assignment in the tutorial consists of four parts.
1. Explanation of the Nemeth symbol and how it is used,
2. Reading exercises in which Nemeth is pronounced correctly after the student reads it,
3. Writing exercises in which the student listens to Nemeth text and writes it correctly, and
4. Proofreading exercisesin which the student corrects errors.
Following is a summary of how students work through these lessons.
Explanation. The student should use the thumb keys to read through the explanation so that he or she understands the concept. When done, press Spacebar+E to exit; then use the Spacebar to navigate to the Reading exercises, and press Enter.
In the reading exercises, the student can use the thumb keys to read each item in Braille; then press Spacebar+I to hear the correct pronunciation of the Nemeth content. At any point, the student can press Spacebar+H to hear context sensitive help.
When done with the exercise, press Spacebar+E to return to the activity menu.
Writing Exercises. Use Spacebar to navigate to the Writing exercises, then press Enter. The student will be instructed to write each item that is spoken. To hear the item again, press Space+C. When done writing, press Enter to be graded.
To abandon your answer so that you can write it again, press Space+R.
To view the correct answer, press Space+i. This allows you to view the answer so that you can see how to write it correctly which is very helpful when working with a new symbol.
When done with the lesson, press Space+E to return to the Activity menu.
Proofreading exercises. Students will be instructed to edit the Braille so that it reads correctly. Press Enter to display the first item that you need to correct. Type the correction and press Enter. You will be advised that it is correct, and a new item will be displayed.
To hear the item again, press Space+C.
To have your answer graded, press Enter.
To abandon your work and rewrite your answer, press Space+R.
To view the correct answer, press Space+I.
For context sensitive help at any point, press Space+H.
To return to the activity menu, press Space+E.
Students can return to the Main menu at any point by pressing Space+Dots1,2,3,4,5,6. The next time that the student returns to the Nemeth tutorial, he or she will be asked if they want to return to the exercises of the lesson they were on. If the student presses Y for Yes, they will be returned to the point where they left off. If they answer N for No, they will be returned to the tutorial Table of Contents.
Writing Nemeth on the Apex.
When working with a student, it is helpful to have speech turned on as well as visual output from a monitor or an iPad using VNC viewer. That way, the student can hear and the teacher or aidecan see the results. To get started, create a new document in the General folder as follows:
At the Main menu, press W for Word processor.
Press C to create a document.
Use the Spacebar to select the Flash disk, and press Enter.
Select the General folder and press Enter.
Type “practice homework” and press Enter. You are in a blank document.
Type “homework assignment for March 21” and press Enter two times to start a new paragraph.
Type “Problem 1” and press Enter two times to start a new paragraph.
Press Backspace+N to turn on Nemeth Braille.Now, enter the following in Nemeth.
X2+y2 = 29 where y = 2.
X2+4 = 29
X2 = 25
X = 5
Press Backspace+B to return to contracted Braile.
Using contracted Braille, write Problem 2. Compute the area of a circle having a radius of 5 feet. Before starting, note that the formula contains the Greek letter (pi).
To insert a Greek letter like (pi), do the following.
1. Press Backspace+Dots3,5 to open the Nemeth Symbol Table list.
2. Press Spacebar two times to get to Greek symbols; then press Enter.
3. Press Spacebar 15 times to get to (pi) then press Enter to insert the symbol.
4. Shortcut. If you already know how to write (pi) in Nemeth, open the Greek symbols liss, press Spacebar one time to locate Greek indicator and press Enter. Now, type the letter p to complete the expression.
To start problem 2, press Enter two times to create a new paragraph.
Press Backspace+N to switch to Nemeth Braille.
Type the following using Nemeth Braille. The student should have speech turned on when writing Nemeth Braille. With speech turned on, he or she can press Space+C at the end of each line to hear the Nemeth entry spoken. If necessary, the student can pres Space+Dot1 to hear the prior line, or Space+Dot4 to hear the next line.
A = 3.14159 x 52
Press Backspace+B to return to contracted Braille mode.
Type “Answer:” using Contracted Braille. You can compute the answer using the Apex calculator as follows.
1. Press Enter+Backspace+S to open the calculator on the Apex. If necessary, press Backspace+C to clear any previous number.
2. Type 25 x 3.14159 and press Enter.
3. Press Backspace+Enter+W to return to the Word Processor.
4. Press Spacebar+O to open the Options menu.
5. Press the letter I to open the Insert menu.
6. Press the letter C for Calculator. You will be prompted, “Insert result or whole calculation?” At this point, you can press R to insert the result or C to insert the entire computation.
7. Press R for Result. The answer wil be pasted into the document.
Note. If the student presses the letter C for Whole Calculation instead of R for resultonly, the entire computation will be pasted into the document in computer Braille. If this is done,the student will need to rute the cursor past the result so that they can continue typing in contracted Braille.
When done, press Space+Dots1,2,3,4,5,6 to return to the main menu. Your document will be saved.
Note that students can also use a Braille Writer or talking calculator to work through the problems, and then prepare their finished work on the Apex.
Printing Your Assignment.
For printing, you may connect your BrailleNote to a compatible printer (see the list of compatible printers on the Humanware website).
1. Turn on the printer.
2. Plug the USB cable into one of the three USB ports located on the left rear edge of the BrailleNote Apex.
3. On the Apex, press W for Word Processor, then the letter P for Print. The Apex will ask if you want to print or setup printer. Here, press P for Print.
4. At this point, you can select a document in the normal way. However, if the student has just finished writing the document, the correct file name will already be displayed. If this is the case, just press Enter to select the current document.
5. The Apex will ask, “Printer ready?” At this point, press Y for Yes, and printing will begin.
Exporting Your Document to a USB Flash Drive
It may be that no printer is available in the classroom. In this case, a USB flash drive or a card reader comes in handy.The student can export a document to a USB flash drive or to an SD card which can be accessed using a card reader. The document can then be copied onto a computer where it can be read by the teacher.
In this exercise, we will insert a USB flash drive into one of the USB ports on the back edge of the Apex.
Insert the flash drive. The Apex will say, “hard disk ready.”
1. Att the Main menu, press F for File Manager.
2. Press T for Translation menu.
3. Press E for Export document
4. Press Enter to accept the General folder.
5. When prompted for a document name, press Enter to accept “practice homework.”
6. When prompted for a device, press Enter for file.
7. When prompted to export as which file type, press Space+Dots3,4 two times to select Microsoft Word File; then press Enter.
8. When prompted for a destination drive, press Spacebar until Hard Disk is selected; then press Enter.
9. When prompted for a directory name, press Enter for slash; this will export the document to the root of the drive.
10. You will be prompted for a file name and advised that computer Braille is required. Write “practice homework” with no contractions, and press Enter. You will be advised that 1 file was exported.
11. Press Dots1,2,3,4,5,6 to return to the Main menu.
Insert the USB flash drive into the USB port of a computer and open the “practice homework.doc” file. You will see that the Nemeth code has been translated into readable text that can be read and easily understood by a teacher or transcriber.
The result will appear as follows.
Homework Assignment for March 21
Problem 1.
x(superscript)2(endscript) + y(superscript)2 = 29 where y = 2
x(superscript)2(endscript) + 4 = 25
x(superscript)2 = 25
x = 5
Problem 2.
Compute the area of a circle having a radius of 5 feet.
a = (pi) · r(superscript)2
a = 3.14159 · 5(superscript)2
a = 3.14159 · 25
Answer: 78.53975
Entire computation:
25 * 3.14159 = 78.53975
If the entire computation is pasted into the document as shown above, it will be in computer Braille which can be read by the instructor.
To assist with translation, a “nemeth translation abbreviations guide” file has been provided in the General folder of the BrailleNote Apex.It is a good idea for the student to print out this guide and attach it to the homework assignment. The attachment is displayed below.
Nemeth Translation Abbreviations Guide
Certain braille math symbols are not translated exactly to print equivalents. The below list will clarify some of the abbreviations used.
Abbreviation or Symbol / Description(superscript) / SuperScript indicator
(subscript) / Subscript Indicator
(endscript) / Shows end of a superscript or subscript (Base Line Indicator)
(superscript with subscript) / SuperScript With Subscript Indicator
(subscript with superscript) / SubScript With Superscript Indicator
(open frac) / Open Fraction Indicator
(close frac) / Close Fraction Indicator
over / Horizontal Fraction Line
(open mixed num) / Open Mixed Number Indicator
(close mixed num) / CloseMixedNumInd,
(Root) / Open Root Indicator
(EndRoot) / Signifies the end of the root
(RootIndex) / IndexOfRadical
(notIdentitySign) / NotIdentity
(shaded) / Signifies a Shape Is Shaded
(solid) / Signifies a Filled Shape
(script) / Script Indicator
(sigma) / Sigma Sign
lim / Limit
divided into / Curved Division Symbol
(1stORad) / 1st Order Of Radical
(2ndORad) / 2nd Order Of Radical
(3rdORad) / 3rd Order Of Radical
(1stORadEnd) / End Of 1st Order Of Radical
(2ndORadEnd) / End Of 2nd Order Of Radical
(3rdORadEnd) / End Of 3rd Order Of Radical
_/~ / SingleIntegral,
_/~_/~ / DoubleIntegral,
_/~_/~_/~ / Triple Integral
_/~(with circle) / Integral Sup Circle
_/~(with rectangle) / IntegralSupRec,
_/~(with square) / Integral Sup Square
_/~(with infinity) / Integral Sup Infinity
Cancel{ / Opening Cancel Indicator
} / Close Cancel Indicator
(E) / Equivalence
(partial deriv) / Partial Derivative
(infinity) / Infinity Symbol
Roman / Signifies Roman Numerals
ß / Beta,
(sub) / Subscript Special
<--- / Long Left Arrow
---> / Long Right Arrow
| / StraightDivision
>= / Greater Than Or equal To
<= / Less Than Or Equal To
~ / Similar To
~= / Congruent To
!= / Not Equal
!> / Not Greater
!< / Not Less Than
!>= / Not Greater Or Equal
!<= / Not Less Or Equal
!~ / Not Similar
!~= / Not Congruent
'' / Seconds,
' / Minutes,
! / Factorial
Nemeth Braille on the Braille Sense
Nemeth Braille is now supported on the BrailleSense U2 note taker. In the following notes, I will explain how the Braille Sense can be used to write and translate Nemeth Braille.
When teaching Nemeth Braille, it is helpful to use visual output in order to see what the student is working on.The Braille Sense can display output visually on either its LCD display or on a monitor. You can display output on a VGA monitor as follows:
1. Press Space+O to open Global Options.
2. Press Space+Dot4 until you get to the VGA setting.
3. Press Spacebar to turn on VGA output.
4. Press Enter to save the settings.
Like the BrailleNote Apex, the Braille Sense has a Perkins-style keyboard with Enter on the right and Backspace on the left.
Function keys are located on either side of the Spacebar. F1 and F2 are on the left; F3 and F4 are on the right. The function keys have the following uses.
1. F1. Open main program menu.
2. F2. Open menus for the program that you are running.
3. F3. Same as pressing Tab key; pressing Space+F3 is Back-Tab.
4. F4. Same as pressing Escape.
F2+F3: Cycle through running programs.
Two programmable keys are located on either side of the Braille display. On either side, the bottom key pans forward through a document; the upper key pans backward. These keys can be set to pan through Braille one display width at a time, as well as by line, sentence, or paragraph.
Before writing Nemeth Braille, make sure that the Braille Sense is set to save documents in the default .hbl format.Do this as follows
1. Press Space+O for the Global Options menu.
2. The item that you want to change is near the bottom of the options list, so press Spacebar+Dots456 to get to the bottom.
3. Press Spacebar+Dot1 seven times to move up to the Default Document type setting; or you can just press the letter Q to get there immediately.
4. Press Spacebar until the default document type is set to Sense Document; then press Enter to save the settings.
Using Nemeth Mode
Press Backspace+N to enter Nemeth mode. This is a toggle, so pressing Backspace+N a second time will exit Nemeth mode.
While in Nemeth mode, pressing Spacebar+H will bring up a listing of Nemeth symbols including operations, Comparative symbols, punctuation, measurement symbols, fractions, roots, superscripts and subscripts, limits symbols, integral symbols, data set symbols, geometric symbols, and more. Press Enter on any symbol to hear the dotcombinations; example, Shape indicator, (Dots1,2,4,6). Or Infinity sign, (press Dot6 then Dots1,2,3,4,5,6).
When done with Help, press Space+E one or two times depending on whether you are in a sub listing. The Braille Sense will say “Help closed.”
Note that Help chapter 5 on word processing also has a description of the Nemeth symbols.
Deleting Items When Writing in Nemeth mode.
At present, pressing Backspace multiple times while writing in Nemth mode locks up the system and requires a reset. For the time being, press Space+D to delete the current character. Or, you can delete an entire line by pressing Backspace+C.
Writing a Sample Homework File
1.Press the F1 key to open the main program menu.
2. Press W for Word Processor; a blank document will open.
3. Press Spacebar+S to open the Save As dialog. You will see that the default name is noname.hbl.
4. For the file name, type Homework 03-21-2015 and press Enter. Be sure to use dropped computer Braille numbers when you write the date portion of the file name.
The student can then type the assignment description and date using standard contracted Braille. Here, type “Homework for March 21, 2015,” and press Enter two times to start a new paragraph.
5. Type “Problem 1,” and press Enter two times to start a new paragraph.
6. Now, press Backspace+N to switch to Nemeth mode. Speech and Braille will show a “Start Nemeth Mode,” message if messages are turned on.
Now, type the following using Nemeth Braille. Note that the student should have speech turned on when writing Nemeth. That way, he or she can press Spacebar+C to have the current line spoken in order to verify that the Nemeth is correctThe student can also use Spacebar+Dot1 or Spacebar+Dot4 to hear the previous or next line whenever necessary.