TYRIL 790 | SAN | The Dow Chemical Company
Rheological properties / Value / Unit / Test Standard
ISO Data
Melt volume-flow rate / 28 / cm³/10min / ISO 1133
Temperature / 220 / °C / ISO 1133
Load / 10 / kg / ISO 1133
Mechanical properties / Value / Unit / Test Standard
ISO Data
Tensile Modulus / 3800 / MPa / ISO 527-1/-2
Yield stress / 76 / MPa / ISO 527-1/-2
Yield strain / 2.6 / % / ISO 527-1/-2
Nominal strain at break / 2.6 / % / ISO 527-1/-2
Charpy impact strength (+23°C) / 17 / kJ/m² / ISO 179/1eU
Charpy impact strength (-30°C) / 18 / kJ/m² / ISO 179/1eU
Tensile notched impact strength (+23°C) / 17 / kJ/m² / ISO 8256/1
Thermal properties / Value / Unit / Test Standard
ISO Data
Temp. of deflection under load (1.80 MPa) / 101 / °C / ISO 75-1/-2
Vicat softening temperature (50°C/h 50N) / 101 / °C / ISO 306
Coeff. of linear therm. expansion (parallel) / 0.5 / E-4/°C / ISO 11359-1/-2
Coeff. of linear therm. expansion (normal) / 0.6 / E-4/°C / ISO 11359-1/-2
Burning Behav. at 1.5 mm nom. thickn. / HB / class / IEC 60695-11-10
Thickness tested / 1.5 / mm / IEC 60695-11-10
UL recognition / UL / - / -
Electrical properties / Value / Unit / Test Standard
ISO Data
Relative permittivity (100Hz) / 2.8 / - / IEC 60250
Relative permittivity (1 MHz) / 2.8 / - / IEC 60250
Dissipation factor (100 Hz) / 0.8 / E-4 / IEC 60250
Dissipation factor (1 MHz) / 1 / E-4 / IEC 60250
Volume resistivity / >1E13 / Ohm*m / IEC 60093
Surface resistivity / >1E15 / Ohm / IEC 60093
Other properties / Value / Unit / Test Standard
ISO Data
Water absorption / 0.1 / % / Sim. to ISO 62
Humidity absorption / 0.6 / % / Sim. to ISO 62
Density / 1080 / kg/m³ / ISO 1183
Material specific properties / Value / Unit / Test Standard
ISO Data
Viscosity number / 91 / cm³/g / ISO 307, 1157, 1628
Rheological calculation properties / Value / Unit / Test Standard
ISO Data
Density of melt / 916 / kg/m³ / -
Thermal conductivity of melt / 0.148 / W/(m K) / -
Spec. heat capacity melt / 1870 / J/(kg K) / -
Test specimen production / Value / Unit / Test Standard
ISO Data
Processing conditions acc. ISO / 4894 / - / ISO ....-2
Injection Molding, melt temperature / 250 / °C / ISO 294
mold temperature / 50 / °C / ISO 10724
injection velocity / 300 / mm/s / ISO 294
Characteristic
Regional Availability
Europe