Learner name / Assessor name
Michael Cooke
Date issued / Completion date / Submitted on
Qualification / Unit number and title
BTEC level 3 Engineering / Unit 30 - Setting and Proving Secondary Processing Machines
Assignment title / Assignment 1 Producing Components Using Secondary Processing Techniques
In this assessment you will have opportunities to provide evidence against the following criteria.
Indicate the page numbers where the evidence can be found.
Criteria reference / To achieve the criteria the evidence must show that
the student is able to: / Task no. / Evidence
P4 / Set up a secondary processingmachine to safely produce agiven component. / 1 / Product, Observation, Photos, Sketches
P5 / Carry out checks for accuracyof a given component duringthe setup of a secondaryprocessing machine. / 2 / Inspection Record, Observation
Learner declaration
I certify that the work submitted for this assignment is my own and research sources are fully acknowledged.
Learner signature: Date:
Assignment brief
Qualification / BTEC level 3 Engineering
Unit number and title / Unit 30 - Setting and Proving Secondary Processing Machines
Start date
Deadline
Assessor name / Michael Cooke
Scenario
You are approaching the end of your apprenticeship as a machinist in an engineering firm and you are required to demonstrate that you have acquired the necessary skills and knowledge to join the machinist on the production line, to achieve this you need to set up a secondary machining process to produce a given component and check it for accuracy. produce
Assignment title / Assignment 1 Producing Components Using Secondary Processing Techniques
Task 1
You are required to setup one of the secondary machining processes listed below and manufacture one of the optional components using the correct tooling, safety precautions and techniques to the required standard, it is also necessary to take notes and produce sketches or photos as product evidence.
Secondary Machining Process and optional Components
- Turning (Large Tap Wrench Handles, Screw Jack, Plumb Bob)
- Milling ( Tee Nut, Small Clamp, Machined Block)
- Drilling ( Drill Stand)
Task 2
Using appropriate measuring equipment, carry out checks for accuracy at critical stages during the set up and manufacture of the component produced in task one, record your measurements in the chart provided along with any actions required to correct errors
P5
Sources of information
Drawings, inspection sheet, class notes and Knowledge gained in during practical workshop sessions
This brief has been verified as being fit for purpose
Assessor
Signature / Date
Internal verifier
Signature / Date