2.6) Tools for Information Processes Worksheet – Transmitting and Receiving

·  Transmitting and receiving is the…

·  There are two main kinds of digital transmission: ______& ______

·  S______transfer …

·  P______transfer …

·  [FIGURE 2.23, p.70]

·  Serial transfer is used over longer distances for devices such as ______and ______and through such media as ______, ______
______, ______& ______.

·  Serial transmission can be either ______or ______.

·  In asynchronous transmission, each byte…

·  A parity bit is an additional bit that is used to check for errors in transmission.

·  Parity bits can be either odd or even, if an odd parity is chosen then …

·  If an even parity is chosen then…

·  If an error has occurred in a single bit then…

·  Synchronous transmission requires…

·  It is faster…

·  Direction of data flow can be either ______, ______, or ______.

·  [FIGURE 2.24, p.71]

·  Simplex:

·  Half duplex:

·  Full duplex:

·  The speed of data transmission is measured either by its ______rate or the number of ______
______(bps).

·  Baud rate is the …

·  Bps can be different from baud rate because…

HARDWARE

·  Every part of the computer is linked to the CPU via a ______.

·  A ______is a pathway of wires and ______that provides a link between…

·  The size of a bus is called its width. The greater the width, the more data that can be transmitted.

·  E.g.

·  An internal bus…

·  An external bus…

·  Peripheral devices are linked to the CPU through ______and ______.

·  An expansion slot is…

·  An expansion card is…

·  Expansion cards are used to…

·  A port is…

·  Ports can be either serial or parallel.

·  Parallel ports…

·  Serial ports…

·  A modem is a device that enables..

·  The word modem stands for ______/______.

·  A modem …

·  Modems can be either internal or external.

·  The speed of a modem is measured in…

·  Some modems have fax capabilities…

·  Networks exist when…

·  Devices used to send or receive data are called terminals. These terminals can be dumb, smart or intelligent.

·  Dumb terminals…

·  Smart terminals…

·  Intelligent terminals…

·  Networks are classified according to the distance they cover.

·  LAN’s…

·  Three advantages of LAN’s are:

·  WAN’s cover much larger spaces.

·  Because of this they rely…


SOFTWARE

·  Special communications software is used to send and receive data over modems and networks.

·  Communications software manages…

·  A protocol is…

·  Compression …

·  Email…

·  Encryption of data..

Non-computer Tools

·  Conventional tools such as mail, ______, ______, ______and ______are used to transmit and receive.

·  Each of these can be compared and contrasted with computer-based systems.

Social and Ethical Issues

·  The accuracy of data on the Internet…

·  The security of data…

·  ‘Netiquette’…

·  Acknowledgement of sources and ownership of material. Failure to acknowledge the work of others, or trying to pass it off as your own work is considered plagiarism.

·  Privacy…

·  The nature of work has changed…

·  Traditional businesses have been impacted…