Aluminum, Nickel, Titanium, Steel, Copper, Magnesium, Beryllium / Brazing
Carburizing, Nitriding / HIP, Induction Hardening
Hardness Testing / Conductivity Testing
Room Temperature Tensile Testing / Pyrometry Testing

The Heat Treating Task Group coversthe following processes:

Notice 1:All times are approximate and subject to change. Please contact PRI for updated information.

Notice 2:At the beginning of each day and after each break, the meeting will start with Opening Comments consisting of: Call to Order/Quorum Check, Introductions (as needed), Routing of the Attendance List (as needed)

Notice 3:Please bring your agenda with you to the meeting. Copies will not be available on-site.

Best Practices: 1) Start all meetings on time. 2) Follow the agenda. 3) No long-winded discussions

Caution: Export Controlled (e.g. ITAR, EAR) material is prohibited from presentations. It is the responsibility of the presenter to ensure that this material is not included.

Meeting Objectives:

  1. Face-to-face Subscribers, Suppliers and Nadcap Staff
  2. Auditor Consistency
  3. Checklist Comment Discussions
  4. General Nadcap Business

Heat Treating Task Group Meeting AgendaOCTOBER 2013

Closed Meeting in ALL CAPS

Monday 21 October 2013

8:00 AM

1.0OPENING COMMENTS

8:15 AM

2.0PREVIOUS MEETING MINUTES

8:20 AM

3.0OCTOBER AGENDA

8:30 AM

4.0TASK GROUP TUTORIAL

8:45 AM

5.0STAFF ENGINEERS DELEGATION

9:15 AM

6.0LAPSED ACCREDITATIONS

9:20 AM

7.0APPEAL ANALYSIS & POSSIBLE APPEALS

10:00 AM

8.0AUDITOR CONFERENCE DEBRIEF

10:30 AM

9.0AUDITOR CONSISTENCY

12:00 AM – 1:00 PM

LUNCH BREAK

1:00 PM

10.0AUDIT OBSERVERS

1:15 PM

11.0NOP-012

1:45 PM

12.0SUBSCRIBER VOTING MEMBER PARTICIPATION

2:00 PM

13.0PRIME’S SCOPE IN AC7102/S

2:15 PM

14.0FAILURE ANALYSIS & VCA DATA

2:30 PM

15.0QUENCH EFFECTIVENESS

3:00 PM

16.0BRAZING EVALUATION

3:30 PM

17.0NEW PROCESSES

3:45 pm

ADJOURNMENT CLOSED MEETING

4:00 pm

18.0HT-STSTG

6:00 pm

ADJOURNMENT OPEN MEETING

Tuesday 22 October 2013

8:00 am – 9:00 am

Supplier Orientation & Tutorial – An introduction and overview of the Nadcap program

9:00 am

19.0Opening Comments

9:20 am

20.0June 2013 Meeting Minutes

9:25 am

21.0AMS 2759/2 – Start of Soak

9:40 am

22.0RAIL

9:55 am

23.0Closed Meeting Report Out

10:15 am

24.0AC7102/3 Rev. C – New Ballot

11:00 am

25.0AC7102/4 Rev. C – New Ballot

11:45 am

26.0HT-STSTG Report Out

12:00 am – 1:00 pm

Lunch Break

1:00 pm

27.0AC7102 Rev. H

1:30 pm

28.0AC7102/8 Rev. NA - Proposal

1:45 pm

29.0HTTG Pyrometry Guide Update

2:00 pm

30.0HTTG Audit Handbook Update

2:15 pm

31.0NMC Metrics

2:45 pm

32.0Auditor Advisories

3:00 pm

33.0Auditor Advisories to be Added to the HTTG Audit Handbook

3:45 pm

34.0New Possible Processes

4:00 pm

ADJOURNMENT OPEN MEETING

5:00 pm – 7:00 pm

Supplier Support Committee Meeting - All suppliers are encouraged to attend.

5:00 pm – 7:00 pm

Planning & Ops – Task Group Chairs and Staff Engineers are required to attend

WEDNESDAY 23 OCTOBER 2013

8:00 am – 10:00 am

Nadcap Management Council Meeting – All members are encouraged to attend this informative and important meeting.

10:15 am

35.0Opening Comments

10:20 am

36.0SSC Report

10:35 am

37.0AMEC Report

10:50 am

38.0Planning and Ops Debrief

11:05 am

39.0Failure Analysis & VCA Data

11:30 am

40.0Auditor Conference Debrief

11:45 am

41.0Supplier Voting Member Participation

12:00 am – 1:00 pm

Lunch Break

1:00 pm

42.0SAT & Alternate SAT

1:45 pm

43.0Top 10 NCRs

2:30 pm

15 Minute Break

2:45 pm

44.0Process Control System

3:30 pm

45.0Question & Answer Session

4:30 pm

ADJOURNMENT WORKSHOP
THURSDAY 24 OCTOBER 2013

8:00 am

46.0Opening Comments

8:10 am

47.0Open Meeting Tabled Subjects

8:30 am

48.0New Business

8:45 am

49.0RAIL New Actions

9:00 am

ADJOURNMENT OPEN MEETING

9:00 am

10 Minute Break

9:10 am

50.0Opening Comments

9:20 am

51.0Audit Allocation

9:45 am

52.0Closed Meeting Tabled Subjects

10:00 am

53.0New Business

10:30 am

54.0Finalize February 2014 Agenda

11:00 am

ADJOURNMENT CLOSED MEETING

Heat Treating Task Group Meeting AgendaOCTOBER 2013

Monday 21 October 2013

8:00 am / CLOSED / 1.0Opening Comments
1.1.Call to Order/Quorum Check
  • Verify only Subscriber Members are in attendance
  • Introductions
  • Code of Ethics/Antitrust and Meeting Conduct
/ Thomas Norris
Marcel Cuperman
8:15 am / 2.0Previous Meeting Minutes
  • Review the minutes from June 2013
/ Thomas Norris
8:20 am / 3.0October Agenda
  • Review the Agenda for the week
/ Marcel Cuperman
8:30 am / 4.0Task Group Tutorial
4.1.P-frm-10
  • Subscribers Matrix
/ Marcel Cuperman
8:45 am / 5.0Staff Engineers Delegation
5.1.New Delegation / Marcel Cuperman Thomas Norris
9:15 am / 6.0Lapsed Accreditations / Jerry Aston
9:20 am / 7.0Appeal Analysis & Possible Appeals / Marcel Cuperman
9:45 am / 15 Minute Break
10:00 am / 8.0Auditor Conference Debrief / Thomas Norris
10:30 am / 9.0Auditor Consistency
9.1.+/- 4 NCRs
9.2.Auditors Variation Data
9.3.The Most/Least 10 NCRs / Thomas Norris
Marcel Cuperman
Doug Matson
Robert Faticanti
12:00 am – 1:00 pm / LUNCH BREAK
1:00 pm / CLOSED / 10.0Audit Observers / Marcel Cuperman
1:15 pm / 11.0NOP-012 / Jerry Aston
1:45 pm / 12.0Subscriber Voting Member Participation / Marcel Cuperman
Thomas Norris
2:00 pm / 13.0Prime’s Scope in AC7102/S / Cyril Vernault
2:15 pm / 14.0Failure Analysis & VCA Data / Marcel Cuperman
2:30 pm / 15.0Quench Effectiveness – A Common Approach / Cyril Vernault
2:45 pm / 15 Minute Break
3:00 pm / 16.0Brazing Evaluation / Martin Day
3:30 pm / 17.0New Processes / Marcel Cuperman
Jeff Thyssen
3:45 pm / ADJOURNMENT CLOSED MEETING
4:00 pm / OPEN / 18.0HT-STSTG
18.1.Review Agenda
18.2.Suppliers’ Activity/STSTG Projects
18.3.New Business
18.4.Questions / Johanna Lisa
6:00 pm / ADJOURNMENT OPEN MEETING

Tuesday 22 October 2013

8:00 am – 9:00 am / Supplier Orientation & Tutorial– An introduction and overview of the Nadcap program
9:00 am / OPEN / 19.0Opening Comments
19.1.Call to Order/Quorum Check
19.2.Introductions
19.3.Code of Ethics/Antitrust and Meeting Conduct
19.4.Review Agenda / Thomas Norris
Marcel Cuperman
9:20 am / 20.0June 2013 Meeting Minutes
  • Review and Accept the minutes from June 2013 meeting
/ Thomas Norris
9:25 am / 21.0AMS 2759/2 – Start of Soak / Thomas Norris
AMEC Members
9:40 am / 22.0RAIL / Marcel Cuperman
9:55 am / 23.0Closed Meeting Report Out / Thomas Norris
10:15 am / 24.0AC7102/3 Rev. C –New Ballot Comments / Marcel Cuperman
10:45 am / 15 Minute Break
11:00 am / 25.0AC7102/4 Rev. C –New Ballot Comments / Marcel Cuperman
11:45 am / 26.0HT-STSTG Report Out / Johanna Lisa
12:00 am – 1:00 pm / Lunch Break
1:00 pm / OPEN / 27.0AC7102 Rev. H
  • Sub-Team Proposal
/ Marcel Cuperman
Sub-Team
1:30 pm / 28.0AC7102/8 Rev. NA - Proposal / Marcel Cuperman
1:45 pm / 29.0HTTG Pyrometry Guide Update / Marcel Cuperman
2:00 pm / 30.0HTTG Audit Handbook Update / Marcel Cuperman
2:15 pm / 31.0NMC Metrics / Marcel Cuperman
2:30 pm / 15 Minute Break
2:45 pm / 32.0Auditor Advisories / Marcel Cuperman
3:00 pm / 33.0Auditor Advisories to be Added to the HTTG Audit Handbook / Marcel Cuperman
3:45 pm / 34.0New Possible Processes / Marcel Cuperman
4:00 pm / ADJOURNMENT OPEN MEETING
5:00 pm – 7:00 pm / Supplier Support Committee Meeting - All suppliers are encouraged to attend.
5:00 pm – 7:00 pm / Planning & Ops – Task Group Chairs and Staff Engineers are required to attend.

WEDNESDAY 23 OCTOBER 2013

8:00 am – 10:00 am / Nadcap Management Council Meeting– All members are encouraged to attend this informative and important meeting.
10:15 am / OPEN / 35.0Opening Comments
35.1.Call to Order/Quorum Check / Thomas Norris
10:20 am / 36.0SSC Report / Roy Adkins
10:35 am / 37.0AMEC Report / Doug Matson
10:50 am / 38.0Planning and Ops Debrief / Thomas Norris
11:05 am / 39.0Failure Analysis & VCA Data / Marcel Cuperman
11:30 am / 40.0Auditor Conference Debrief / Thomas Norris
11:45 am / 41.0Supplier Voting Member Participation / Marcel Cuperman
12:00 am – 1:00 pm / Lunch Break
OPEN / WORKSHOP
1:00 pm / 42.0SAT & Alternate SAT / Cyril Vernault
1:45 pm / 43.0Top 10 NCRs / TBD
2:30 pm / 15 Minute Break
2:45 pm / 44.0Process Control System / Doug Matson
3:30 pm / 45.0Question & Answer Session / Task Group
4:30 pm / ADJOURNMENT WORKSHOP

THURSDAY 24 OCTOBER 2013

8:00 am / OPEN / 46.0Opening Comments
46.1.Call to Order/Quorum Check / Thomas Norris
8:10 am / 47.0Open Meeting Tabled Subjects / Bruce Brownfield
Jerry Aston
8:30 am / 48.0New Business / Thomas Norris
8:45 am / 49.0RAIL New Actions / Marcel Cuperman
Bruce Brownfield
Jerry Aston
9:00 am / ADJOURNMENT OPEN MEETING
9:00 am / 10 Minute Break
9:10 am / CLOSED / 50.0Opening Comments
50.1.Call to Order/Quorum Check
  • Verify only Subscriber Members are in attendance
/ Thomas Norris
9:20 am / 51.0Audit Allocation / Marcel Cuperman
9:45 am / 52.0Closed Meeting Tabled Subjects / Bruce Brownfield
Jerry Aston
10:00 am / 53.0New Business / Thomas Norris
10:30 am / 54.0Finalize February 2014 Agenda / Marcel Cuperman
11:00 am / ADJOURNMENT CLOSED MEETING