The Expanded Polystyrene Association of Southern Africa

SELECTION GUIDE

INTRODUCING

EXPANDED POLYSTYRENE

(EPS)

February 2002

Final Draft

THE EXPANDED POLYSTYRENE ASSOCIATION OF SOUTHERN AFRICA

administered by

ASSOCIATION OF ARCHITECTURAL ALUMINIUM MANUFACTURERS OF SOUTH AFRICA

Incorporating the Architectural Glass Industry

P O Box 15852 Lyttelton 0140

ASSOCIATION OF ARCHITECTURAL ALUMINIUM MANUFACTURERS OF SOUTH AFRICA

Incorporating the Architectural Glass Industry

P O Box 15852 / The AAAMSA Studio
Lyttelton / 261 Retief Avenue
0140 / Lyttelton Manor
(: (012) 664-5570/86
Fax: (012) 664-5659
e-mail:
Web-site: www.epsasa.co.za

Introduction:

The Expanded Polystyrene Association of Southern Africa (EPSASA) under the aegis of AAAMSA promotes that part of the building industry which specializes in home and cold room insulation.

Membership consists of raw material suppliers and converters of expanded polystyrene as well as machinery suppliers.

We are grateful for the information provided by:

·  EUMEPS – European Manufacturers of EPS (Construction) and

·  STYBENEX - Vereniging van Fabrikanten van EPS bouwproducten.

·  EPS International Task Force c/o The British Plastics Federation

All information, recommendation or advise contained in these AAAMSA General Specifications and Selection Guides is given in good faith, to the best of AAAMSA’s knowledge and based on current procedures in effect.

Because actual use of AAAMSA General Specifications and Selection Guides by the user is beyond the control of AAAMSA, such use is within the exclusive responsibility of the user. AAAMSA cannot be held responsible for any loss incurred through incorrect or faulty use of its General Specifications and Selection Guides.

Great care has been taken to ensure that the information provided is correct. No responsibility will be accepted by AAAMSA for any errors and/or omissions, which may have inadvertently occurred.

This Guide may be reproduced in whole or in part in any form or by any means provided the reproduction or transmission acknowledges the origin and copyright date.

Copyright ã AAAMSA 2002

INDEX

PAGE
1. / INTRODUCTION / 1
1.1 / User benefits / 1
1.2 / Environmental benefits / 1
1.3 / Manufacture / 2
1.4 / Application / 2
1.5 / Recycling / Recovery / 3
2. / BEHAVIOUR OF EPS IN CASE OF FIRE / 4
2.1 / Stages of a building Fire / 4
2.2 / The behaviour of EPS in a fire / 4
2.3 / Fire-Retardants / 5
2.4 / Heat Release / 5
2.5 / Smoke / 7
2.6 / Flame Spread / 7
2.7 / Toxicity / 8
2.8 / Protective Coverings / 9
2.9 / Fire Residues of EPS and Disposal / 10
2.10 / General Precautions for Storage of EPS on site / 10
3. / HEALTHY BUILDING WITH EPS / 10
3.1 / Healthy during Production / 10
3.2 / Health during Handling on the Building Site / 11
3.3 / Health in Use-Indoor Environment / 12
3.4 / Health during Demolition and Renovation / 12
4. / LIFE CYCLE ASSESSMENT / 13
4.1 / About LCA – Frequently Asked Questions / 13
4.2 / Life Cycle Assessment of EPS / 13
5. / PHYSICAL PROPERTIES / 14
6. / EPS IN PACKAGING / 15
6.1 / Packaging of Industrial Products / 15
6.2 / Packaging of Foodstuffs / 15
6.3 / Ecobalances or Life-Cycle Analyses / 16
7. / CONCLUSIONS / 17
8. / EPSASA MEMBERS / 18
5.1 / Raw Material Suppliers / 18
5.2 / Converters (Manufacturers of EPS) / 18
5.3 / Associate Members / 18

Page 1

1.  INTRODUCTION

Expanded Polystyrene, or EPS for short, is a lightweight, rigid, plastic foam insulation material produced from solid beads of polystyrene. Expansion is achieved by virtue of small amounts of pentane gas dissolved into the polystyrene base material during production. The gas expands under the action of heat, applied as steam, to form perfectly closed cells of EPS. These cells occupy approximately 40 times the volume of the original polystyrene bead. The EPS beads are then moulded into approximate forms suited to their application.

In addition to many significant user benefits, EPS offers substantial environmental advantages. Use of EPS actively contributes to a better environment. Some of the ways in which it does so are outlined below. Moreover, EPS makes this positive contribution at all stages of its life cycle, from manufacture, to application, to recycling or disposal.

Anyone who needs to thermally and acoustically insulate walls, roofs or floors will find EPS the ideal, cost effective and easy-to-use material in all types of buildings, from houses and offices to factories and schools. EPS is used by civil engineers as a lightweight fill or void-forming material. It is also used as a floatation material.

Today, people in all walks of life are concerned about the environment, and measures are being taken in all industries to reduce the impact that activities have on our surroundings.

For today’s building and construction industry, concerns are being addressed by the careful choice of building materials, and in particular, the selection of insulation. One product which can contribute towards a better environment in this field is EPS.

1.1 USER BENEFITS

·  Excellent thermal insulant - EPS is 98 percent air, and is therefore an excellent thermal insulant.

·  Proven acoustic insulant – EPS absorbs sound, both impact sound in floating floors and airborne sounds for walls.

·  Moisture resistant – EPS resists degradation by water.

·  Lifetime durability – EPS does not decompose. It therefore provides lifetime durability.

·  Flexible mechanical properties – With its flexible production process, the mechanical properties of EPS can be adjusted to suit every specified application.

·  Versatile – EPS can be manufactured in almost any shape or size and is compatible with a wide variety of materials.

·  Cost-effective – EPS offers the best price/performance ratio compared to any other insulation material.

·  Easy to transport – EPS is almost as light as air, so it saves fuel in transport.

·  Easy to install – EPS is light, practical, safe and easy to handle and install.

·  Fire retardant – In addition to standard “EPS” there is also a “self extinguishing” version that includes a fire retardant.

1.2  ENVIRONMENTAL BENEFITS

·  Extremely safe – EPS is non-toxic and totally inert. Unlike gas extruded polystyrene (XPS) it contains no Chlorofluorocarbons (CFCs) or Hydrofluorocarbons (HCFCs), and never has at any time during its life cycle. It is also totally absent of any nutritional value, so no fungi or microorganism can grow within EPS.

·  Recycable – EPS can be recycled in many ways once it comes to the end of its life. These include recycling directly into new building products and incineration to recover its inherent energy content. The choice of a recycling method is based on technical, environmental and economic considerations.

·  Health aspects – EPS presents no dangers to health in insulation and use.

Page 2

1.3  MANUFACTURE

THERE ARE FIVE MANUFACTURING STAGES:

1.3.1  PRE-EXPANSION

Polystyrene granules are expanded by free exposure to steam to form larger beads, each consisting of a series of non-interconnecting cells.

1.3.2  CONDITIONING

After expansion, the beads still contain small quantities of both condensed steam and pentane gas. As they cool, air gradually diffuses into the pores, replacing, in part, the other components.

1.3.3  MOULDING

The beads are moulded to form boards, blocks or customized products. The mould serves to shape and retain the pre-foam, and steam is again used to promote expansion. During moulding, the steam causes fusion of each bead to its neighbours, thus forming a homogeneous product.

1.3.4  SHAPING

Following a short cooling period, the moulded block is removed from the machine, and after further conditioning, may be cut or shaped as required using hot-wire elements or other appropriate techniques.

1.3.5  POST-PRODUCTION PROCESSING

The finished product can be laminated with foils, plastics, roofing felt, fibreboard and other facings such as roof or wall cladding material.

1.4  APPLICATION

1.4.1  USE OF EPS PRODUCTS MAKES A POSITIVE CONTRIBUTION TO HEALTH AND SAFETY

It remains effective for the entire life of the construction in which they are used. The energy used in the EPS production process is recovered many times over by the energy saved in the buildings in which it is installed. EPS construction product complies with all building, fire and safety regulations for the application in which they are used.

Some insulation materials are not usually associated with “good health”. EPS, however, is universally recognized as a non-harmful, pleasant material to work with. It is non-toxic, does not sting hands, irritate skin or nostrils, and has no known adverse effective on health. In its end-use condition, EPS presents no health risk whatsoever.

1.4.2  PERFORMANCE

In use, EPS is resistant to moisture and maintains a consistent level of thermal and acoustic performance.

1.4.3  REDUCED FIRE RISK

EPSASA EPS grades are fire retardant. These are more difficult to ignite than standard grades, offering further protection during installation.

The gases and vapours given off by EPS in a fire are less dangerous than those from many natural materials, such as timber or cork.

In almost all applications, EPS is covered by other building materials, such as concrete, brickwork or plasterboard, therefore minimizing the fire risk to EPS.

Page 3

1.5  RECYCLING / RECOVERY

EPS can be treated in the most environmentally appropriate manner via a range of waste management options.

1.5.1  REDUCTION

It is a common misconception that many of our waste problems are caused by plastics. In fact, the total amount of plastics in our municipal solid waste is only seven percent by weight. Of this, EPS accounts for only a very small fraction – just 0.1 percent. EPS products used in the construction industry have a very long effective lifetime because of their durability, so disposal of the product is minimized.

1.5.2  RECYCLING / DISPOSAL SCHEMES

There are several options to treat EPS building and demolition waste, each with environmental, technical and economic implications to consider when choosing the best option to implement in any one place.

Generally the most beneficial is direct re-use by grinding clean EPS waste and adding it to virgin material during production. This waste can also be used to improve soil condition.

Alternatively, EPS can be melted and extruded to make compact polystyrene, for items such as plant pots, coat hangers and a wood substitute. Medium toughened polystyrene from which sheets for thermoformed articles, such as trays, can also be made. As part of mixed plastic waste, EPS can be recycled to make, for example, park benches, fence posts and road signs, ensuring the plastic material has a long and useful second life.

1.5.3  ENERGY RECOVERY

This involves the recovery of energy, usually in the form of heat from incineration. This gives EPS-waste a genuine post-consumer use. The calorific value of EPS available for heat recovery is slightly more than that of coal by weight.

In a modern incinerator, EPS releases most of its energy as heat, aiding in the burning of municipal solid waste and emitting only carbon dioxide, water vapour and a trace of non-toxic ash. The fumes are non-toxic and are not harmful to the environment as no dioxins or furans are emitted. The energy gained can be used for local heating and generation of electricity.

1.5.4  LIGHTWEIGHT CONCRETE

EPS is used successfully as an aggregate for lightweight concrete for both
structural and thermal insulation applications. Optimum physical and thermal
properties are achieved with low density spherical EPS aggregate due to it's
effective "arching properties within the cement matrix, low moisture absorption
to minimize water/cement ratios and maximum strength/weight ratios and a permanent
uniform resistance to the flow of heat. Consequently, lightweight concrete
containing EPS aggregate has captured a growing market throughout the world for
such structural and thermal insulation applications including sandwich panels,
precast concrete building systems, insulation roof fill and decorative
architectural and landscaping products.

1.5.5  LANDFILL

Although currently a large proportion of EPS waste is disposed of in landfill, it is EPSASA’s least preferred option since it does not create a “second life” and is therefore not an optimal use of natural resources.

However, landfill-using EPS does bring advantages. EPS waste is inert and non-toxic, so the landfill site becomes more stable. EPS aerates the soil, encouraging plant growth or reclaimed sites. EPS does not degrade and will not leach any substances into ground water, nor will it form explosive methane gas.

Page 4

2.  BEHAVIOUR OF EPS IN CASE OF FIRE

The purpose of this chapter is to clearly quantify the fire performance of expanded polystyrene (EPS) when used as an insulation material in buildings. This chapter will consider all aspects of the fire performance of EPS in terms of heat release, flame spread, smoke production and toxicity and its contribution to the propagation of fire. Detailed information is provided on the characteristics of EPS foam as a basis for evaluating its behaviour when subjected to ignition sources. The performance of fire retardant additives is also evaluated. This information can be used for hazard assessment taking into account the complexity of a real fire and the difficulty of modeling real fire situations from scaled tests.

Expanded polystyrene is derived mainly from styrene monomer and expanded to form a cellular structure substantially of closed cells. When considering the fire behaviour of any building material it is important to realize that the assessment thereof is based on its performance in end-use conditions. This performance will depend on not only the chemical nature of the material but to a greater extent on its physical state.

Thus the important factors which must be considered in determining the potential fire hazard of EPS are:

·  The foam density and shape of the products.

·  Its configuration relative to an ignition source.

·  The use of any bonding to a substrate of facing.

·  The location of the product (which will influence the heat transport)

·  The availability of oxygen (ventilation).