SuperMax Receiver’s Dongle & Biss Procedures
1.Sm2300 HD
Dongle (Micro Box) Support : Direct open if not press 9339 and select SSSP(twin)
Biss Support:
Keep the biss channel and press RED button.
Put the correct Biss key, channel will be open
------
2.SM 9400PIP
Dongle (Micro Box) Support :
Direct open if not Press ‘9339’ by remote and select SSSP(TWIN)
Biss Support:
Press information 2 times and RED button
Put the correct Biss key,channel will be open
------
3.SM 9900CA
Dongle (Micro Box) Support :
Direcet open if not Press ‘9339’ by remote and select SSSP(TWIN)
Biss Support:
Automatically biss open,If not open
Press 9339 and enter into key edit.
Go biss option and put the correct key.
------
4.FT 2050/2070/2090 Biss Procedure
Dongle (Micro Box) Support :
Press ‘9339’ by remote and select SSSP(TWIN)
Biss Support:
1. First keep the biss channel
2. Press information by remote & press OK and then put biss key ,channel will be open
Biss Support: (OLD RECEIVER)
1. First keep the biss channel
2. Press Ok button by RCU to see the TV list page
3. Then Press 3 as edit by RCU & can see the Biss option
4. Select the zero’s bar & press ok and then delete all zero’s and put the biss number correctly
5. Press Ok as save and again ok for confirmation
6. Wait until the biss channel will open
------
5.SM 550 & 650 Biss Procedure
Dongle (Micro Box) Support : Direct open
Biss Support:
1. First keep the biss channel
2. Press the Reverse button (<) by Remote to see the Biss option.
3. To edit the biss key press ok and put correct Biss key
4. Do the Exit as save & biss channel will be open Surely.
6.9950,9200 and 1x1 Power Plus
Dongle (Micro Box) Support
Go menu ->interface ->cas-> choose SSSP
Biss Support:
Go Menu ->interface ->config-> CAS-YES
Keep the biss channel and press RED button
Put the correct Biss key,channel will be open
------
7. 9300 UHC
Dongle (Micro Box) Support : Direct open
Biss Support:
Press menu and press 6000 by remote controller
New menu came and just enter into const CW
U can see biss option and put it
------
8. HD 5000
Dongle (Micro Box) Support : Direct open
Biss Support:
First Keep the Biss channel
Press Menu & 4132 by Remote controller and u can see Biss menu
Red button is add biss key and put biss key and press OK,Exit.
Biss channel will be open.
(Note:if not open,delete all keys by pressing blue key and again put biss key.)
------
9. SM 750
Dongle (Micro Box) Support : Direct open
Biss Support:
First Keep the Biss channel
Press Blue key by remote controller
Press ADD after that Enter the channel Name &Biss key
press ok (Yellow button)
And then Save (Blue button)
------
10.SM 2350 HDCASMHD 2370CA
Dongle (Micro Box) Support : Direct open
Biss Support:
First Keep the Biss channel
Press Ok & keep channel list
Then Press blue button by Remote controller
Hereafter press Ok and then Enter the Biss key & press ok (Yellow button)
And then Save (Blue button)
------
11.SM 9650 USPI
Dongle (Micro Box) Support : Direct open if not press 9339 and select SSSP(twin)
Biss Support:
Press information 2 times and RED button
Put the correct Biss key,channel will be open
12.SM 2425HD, SM 2350 Power Tech and SM 2560 Brilliant
Dongle (Micro Box) Support : Direct open
Biss Support:
First Keep the Biss channel
Press Ok & keep channel list
Then Press blue button by Remote controller
Hereafter press Ok and then Enter the Biss key & press ok (Yellow button)
And then Save (Blue button)
13.SM 3100 HD AND SM 3150 HD
Dongle (Micro Box) Support :
Enter Plugin menu in the main menu
You can see the ExSIM function under plugin menu
Press RED (Start Type- AUTO type) and then press GREEN (Start)
ExSIM:You can connect external modules which is using twin protocol, Y4, KNJ... (start > OK button > Set the module)
Satellite module "A" is for twin protocol and Satellite module "B" is for Y4
Biss Support:
Enter Plugin menu in the main menu
You can see the “ COCONUT” function under plugin menu
Press RED (Start Type- AUTO type) and then press GREEN (Start)
Just press exit button by remote controller.
Now keep the biss channels first
press 2 times information button and then RED button
Now New window appered,
press OK & put biss keys and saved
14.SM340HD Dream liner ,SM380 HD super jumbo SM390 Ultra max
Dongle (Micro Box) Support : Direct open
Biss Support:
1.Press “OPT+” in remote controller
2.Choose Biss option and press ok
3.put the Biss number and press RED button to save.
15.HD 2550 CA MINI
Dongle (Micro Box) Support : Direct open
Biss Support:
1.FIRST KEEP BISS CHANNEL
2.MENU-> CONDITIONAL ACCESS-> CA SETTING ->KEY EDIT -> BISS -> PRESS OK
3.DELETE OLD BISS KEYS
4.ADD - GREEN BUTTON
5.PUT FREQ & BISS KEY AND THEN SAVE
6.CHANNEL WILL BE OPEN
16.FT 2750 HD
Dongle (Micro Box) Support : Direct open
Biss Support:
First Keep the Biss channel
Press Ok & keep channel list
Then Press blue button by Remote controller
Hereafter press Ok and then Enter the Biss key & press ok (Yellow button)
And then Save (Blue button)
17.SM 3000 HD
“””Upgrade the new software from ””””
Dongle (Micro Box) Support : Direct open
Biss Support:
Menu ->Installation -> patch Menu -> Manual key -> press ok
Press Green button to add biss code
Exit to save
G-share : Direct open
If not open
Menu ->Installation -> patch Menu -> Server settings -> press ok -> press F1 in remote (Load default Server)
18.SM 4110 HD MINI
“””Upgrade the new software from ””””
Dongle (Micro Box) Support : No Support
Biss Support:
Press “8899” by remote controller then it shows “EMU Enable”
Press this ( )button to see Biss function,
Press add (Red button) to add biss keys & Ok button.
19.SM 4120 HD FTA
“””Upgrade the new software from ””””
Dongle (Micro Box) Support : No Support
Biss Support:
Press “8899” by remote controller then it shows “EMU Enable”
Press this ( )button to see Biss function,
Press add (Red button) to add biss keys & Ok button.
20. SM 9700GOLD + CA HD
“””Upgrade the new software from ””””
Dongle (Micro Box) Support : Direct open if not press 9339 and select SSSP(twin)
Biss Support:
Keep the biss channel and press RED button.
Put the correct Biss key, channel will be open
21.FT 9700 Diamond and SM 9700 CA Gold Plus
“””Upgrade the new software from ””””
Dongle (Micro Box) Support : Direct open
Biss Support:
First Keep the Biss channel
Press Ok & keep channel list
Then Press blue button by Remote controller
Hereafter press Ok and then Enter the Biss key & press ok (Yellow button)
And then Save (Blue button)
------