Product Code: 2067239

Stereo Cassette Player with AM/FM Radio

Please insert an image
of the
Stereo Cassette Player
with AM/FM Radio
in this box.

INSTRUCTION MANUAL

Please retain for reference.

Contents

2 / Safety Instructions
3 / Parts Description
3 / Stereo Cassette Player Technical Specifications
3 / Getting to know your Stereo Cassette Player
4 / Powering your Stereo Cassette Player
4 / Using batteries
4 / Using an AC Adaptor
4 / Operating the radio
4 / Tips for best radio reception
5 / Playing a cassette tape
5 / How to record onto a blank cassette tape
6 / Cassette tape operating tips
6 / Leader tape
6 / FCC Regulations Compliance
7 / Cleaning & Maintenance

Thank you for purchasing the Neostar® Stereo Cassette Player with AM/FM Radio

Please ensure that you have received all the parts and that no parts are missing or have been damaged during shipment. If in doubt, do not use the Neostar® Stereo Cassette Playerand contact the service department immediately.

To ensure that you get many years of enjoyment from this product, please read the following instructions carefully, and keep in a safe place for future reference.

Safety instructions:

/ WARNING!

Before using your Neostar® Stereo Cassette Playerfor the first time, please take the time to read these instructions carefully.

  • The Neostar® Stereo Cassette Player is intended for indoor, domestic use only. It should not be used for commercial applications.
  • This appliance contains no user serviceable parts. All repairs must be carried out by a qualified person. Incorrect repairs may place the user at risk of harm, and will invalidate any guarantee.
  • Always check that the voltage indicated on the rating plate corresponds with that of the local supply before connecting to the power supply.
  • Do not operate the Stereo Cassette Playerif the power cord or plug is damaged. If the power cord or plug is damaged, contact a qualified person to carry out repairs.
  • Do not operate this appliance after it has malfunctioned, or if it has been dropped or damaged in any way.
  • Do not expose to dripping or splashing.
  • Never place any heavy objects, or any containers filled with liquid on top of the Neostar® Stereo Cassette Player.
  • Do not leave the Neostar® Stereo Cassette Playernear heat sources, or in direct sunlight, or anywhere that is excessively dusty, sandy or humid.
  • Always unplug the unit when it is not in use.
  • Never insert any foreign objects into any of the outlets on the Stereo Cassette Player.
  • The Neostar® Stereo Cassette Playeris not a toy. It shouldonly be used by children more than eight years of age.
  • The Neostar® Stereo Cassette Playershould not be used by anyone with reduced physical, sensory or mental capabilities,unless they have been given supervision or instruction on how to use it safely.

Parts Description:

Stereo Cassette Player Technical Specifications

Product Code / 2067239
Power supply / Two AA (UM-3) batteries or AC adaptor
Rated capacity / 120V/ 60Hz AC power socket

Getting to know your Stereo Cassette Player

(Insert numbered diagram here)

  1. Cassette door
  2. STOP button
  3. REWIND button
  4. FAST FORWARD button
  5. PLAY button
  6. RECORD button (please add this to diagram)
  7. Radio dial scale
  8. Microphone in
  9. Volume control
  10. Power source
  11. Dial Scale
  12. Speaker
  13. Earphone jack
  14. Function selector
  15. Detachable belt clip
  16. Radio tuner
  17. AM/FM Band selector
  18. DC Input Jack
  19. Battery compartment (please add this to diagram)

Powering your Stereo Cassette Player

TheNeostar®Stereo Cassette Player is poweredwith eithertwo AA (UM-3) batteries or an AC adaptor.Please note: Neither the batteriesnor AC adaptor are not included.

Using batteries

  1. Open the battery compartment(18) on the reverse of the cassette player by sliding open and gently pulling upwards the battery door.
  2. Check the polarity (+/-) inside the battery compartment.
  3. Insert two AA (UM-3) batteries according to the polarity.
  4. Re-close the battery door.

For best performance and extended operating time, we recommend using alkaline batteries.

IMPORTANT!

  • Please always ensure batteries are correctly installed. Incorrect polarity can damage your Neostar® Stereo Cassette Player.
  • Never mix old and new batteries.
  • Never mix alkaline, standard (carbon-zinc) and rechargeable (nickel-cadmium) batteries.
  • If you are not planning to use yourNeostar® Stereo Cassette Playerfor an extended period of time, always remove the batteries. Old or leaking batteries can cause damage to the unit and may void the warranty.
  • Never dispose of batteries in a fire -batteries can leak or explode.

Using an AC adaptor(NOT SUPPLIED)

  1. Insert the DC plug (at the end of the AC adaptor cord) into the DC input jack (17) on the reverse of the cassette player.
  2. Plug the AC adaptor into a 120V/ 60Hz AC power socket.
  3. The Stereo Cassette Playerwill automatically disconnect from using battery power and operate using the AC adaptor.

IMPORTANT!

  • Only use an adaptor with an output voltage rated as 3V DC 600mA, with a centre negative plug.

Operating the radio

  1. Insert the earphone plug into the earphone jack (12).
  2. Put on your earphones.
  3. Switch the function selector (13) to ‘Radio’.
  4. Switch the Band selector(16) to ‘AM’ or ‘FM’ for yourdesired band.
  5. Turn the tuning knob(15) to select your desired radio station.
  6. Adjust the volume control(8) to yourpreferred sound level.
  7. Turn the radio off by simply switching the function selector (13) to ‘Tape’.

Tips forbest radio reception

FM Radio

  • The earphone cord works as an external FM antenna.
  • For maximum FM tuner sensitivity, keep the earphone cord fully extended.
  • Do not wind or fold the earphone cord while listening to the radio.

AM Radio

  • When tuning in AM reception, place the Stereo Cassette Playerin a vertical position.
  • For maximum AM tuner sensitivity, keep turning the unit slowly while keeping it vertical until the best reception is obtained.

Playing a cassette tape

  1. Insert the earphone plug into the earphone jack (12).
  2. Put on your earphones.
  3. Set the function selector (13) to ‘Tape’.
  4. Open the cassette door (1) and insert a pre-recorded cassette tape face upwards.
  5. Close the cassette door.
  6. Press the PLAY button(5).
  7. Adjust the volume control (8) to your preferred sound level.
  8. Press the FAST FORWARD button(4) if you wish to rapidlyadvance the tape.
  9. Press the REWIND button (4) if you wish to rewind the tape to play a track again.
  10. Press the STOP button(2) to switch off.

IMPORTANT – Earphones!

  • Do not use earphones while driving, cycling or operating any motorised vehicle.
  • Do not play your earphones at high volume while walking, especially when crossing roads.
  • Avoid using earphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce volume or discontinue use.
  • Always keep volume at a moderate level so you are able to hear outside sounds and take those around you into consideration.
  • Keep clean using a soft, dry cloth.
  • Never immerse in water.

How to record onto a blank cassette tape

  1. Open the cassette door (1) and insert a blank tape into the cassette compartment.
  2. Before recording music or conversation, check that the cassette tape has two ‘recording lips’(see diagram below).
  1. Gently close the cassette door.
  2. Select your chosen music and/orradio programme you wish to record.
  3. Adjust the volume (8).
  4. Press the RECORD button(6) to begin recording*.
  5. Press the STOPbutton (2) to stop the recording function.
  6. Press the REWIND button (3) to rewind the tape and listen to your recording at any time.
  7. Press the PLAY button (5) to replay therecorded programme.
  8. If you wish to prevent the recorded programme from being erased, remove the ‘recording lips’ on the cassette tape.

* During recording, you can monitor the recording process through your headphones or speaker.

Automatic stop

  • To protect your cassette tapes and prevent unnecessary wear to the cassette mechanism, this unit is equipped with an automatic stopsystem.
  • When the tape ends during play or fast forwarding, the PLAY button (5) automatically releases, which stops the cassette from running.

Cassette tape operating tips

  • To ensure maximum quality recordings, we recommend that you only use only high quality tapes with the Neostar® Stereo Cassette Player.
  • Tapes with a playing time of 120 minutes (C-120) are not recommended. These contain thinner and longer tape, which has a greater chance of malfunctioning and/or jamming, and may damage the cassette mechanism.
  • To ensure good reproduction, please clean the head after every 10-20 hours of use.
  • Keepthe Neostar® Stereo Cassette Player away from excessive heat or cold.
  • If there is slack in the tape, remove the slack prior to inserting the cassette. To remove the slack, insert a pencil into the hub and rotate clockwise (see below).

Leader tape

  • There is a‘leader tape’ at the beginning on each cassette tape. There is no recording on this area. Always allow the tape to run for about five seconds to reach the recording tape.
  • Always keep the tape head clean. A dirty head can cause distorted sound or improper tape speed.
  • To clean, simply depress the PLAY button (5) and use a small cotton swab with tape head cleaner or alcohol to clean the tape head, capstan and pinch roller (seediagram below).

FCC Regulations Compliance

  • The Neostar® Stereo Cassette Player with AM/FM Radio has been tested, and complies with the limits for a Radio Receiver, pursuant to Part 15 of the FCC Rules.
  • These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • There is no guarantee that interference will not occur in a particular installation.
  • If the Neostar® Stereo Cassette Playerdoes cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on) try to correct theinterference by one or more of the following:
  1. Re-orient or relocate the receiving antenna.
  2. Increase the distance between the Stereo Cassette Player and receiver.
  3. Connect the Stereo Cassette Playerto a different power outlet.
  4. Consult the dealer or an experienced radio technician for help.

WARNING!

Any changes or modifications to the Neostar® Stereo Cassette Player that are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Care & Maintenance

  • Clean with a soft, damp cloth slightly moistened with water or a mild detergent.
  • Do not use any chemical cleaners such as alcohol, benzine or thinners.
  • Never leave the Neostar® Stereo Cassette Player in direct sunlight or in hot, humid or dusty places.
  • Keep the Neostar® Stereo Cassette Playeraway from heating appliances and sources of electrical noise such as fluorescent lamps and motors.

/ The crossed out Wheelie Bin logo is used to highlight electrical products that should not be disposed of with normal household waste. Scotts Ltd has contributed to the funding of an alternative network of UK recycling facilities.
Please visit to find where your nearest recycling point is and recycle this product at the end of its life.

Made in China

for

NEOSTAR

1 / Neostar Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW
Enquiries: 0344 482 9700