SSS CONTACT & CIRCUIT BOARD CLEANER IV
Features: Removes Dirt, Dust, Flux and Light Oils
- Nonflammable, Nonconductive Over 20KV
- Safe for Use on Plastics
- Fast Drying with No Residue
Description:This premium precision cleaner provides a solution for your most demanding industrial and electronics maintenance problems. The completely nonflammable formula utilizes the latest innovations in HFC chemistry to create a high purity, nonresidue, fast dry formula, that is completely plastics safe. Neoprene W., Buna N, Buna S, Silicone rubber, Butyl, Natural rubber, Thiokol FA, Viton A, Adiprene L, Nordel, Delrin resin, Zytel, Nylon, Teflon, PVC, Polyurethane, Styrene, Polystyrene, Polypropylene, ABS, and more are not affected by this product. In addition, it is nonconductive to over 20 KV per ASTM D-877 and will not cause “freeze out” or attract moisture when used as directed. It quickly and easily removes dirt, dust, light oils, flux, and other deposits from contacts, circuit boards, relays, switches, solder joints, and other electronics devices. An excellent choice for the maintenance of all electronic or electrical devices in industry.
Markets:Electronic industry - computers, controllers, tuners, couplings, relays, thermo couples, printed circuits, etc. Health care - precision instrumentation, MRI, catscan, x-ray, info processing, environmental controllers, p.c., printers, office and process machinery. Electronic service companies - elevator service, transportation and automotive, marine industry. Industrial - feed and processing equipment, assembly lines, robotics. Communications & Media - radio, television, film, newspapers and magazine production, printers, vending machines, locks, power tools, engines, motors, aircraft and aeronautics, military, coin mechanisms. Other - crystal chandelier cleaner, degreaser prior to solder and tapping, cutting and tapping cooler, removes grease and grime.
Demonstrations:Obtain a 12”X12” mirror, A00352, a printed Styrofoam cup, a clear polystyrene cup, a cigarette lighter, trash can liner, and paper towels.
- Spread a blot of A00352 across your demo mirror and let set. Using the extension tube, spray a line of solvent through the gear lube and point out to the customer how aggressively our contact cleaner attacks even the toughest of soils.
- Spray again onto clean mirror and point out fast evaporation and lack of residue. Ignite lighter and spray product into flame to extinguish. Point out total nonflammability and plastics safe.
- With the extension tube attached, spray a line through the printing on styrofoam cup and point out to the customer that not only is plastic unaffected by A00369 the printed graphics are also unaffected.
- With the extension tube attached and holding the polystyrene cup upside down, spray a one second burst on to the side of the cup. Point out how quickly A00369 dries with no residue and no effect to the clarity of the plastic.
- Deposit soiled towels from clean up into liner and take with you. Nobody likes a smelly office.
Note: If customer is using 15,000 or lower dielectric product, repeat steps 3 and or 4 with customers product and point out the plastic degradation.
SSS Product #05289
02/03