MÖJJ ENGINEERING SYSTEMS LTD.

81-B/15, M.I.D.C, BHOSARI, PUNE 411 026.

Tel : 27120835 / 27122837 / 27122838 / 27127478

Fax : +91 - 20 – 27127198 EMAIL :

QUESTIONNAIRE FOR SPRAY DRYING SYSTEM
Name of Company :
Address :
Phone & Fax :
Email Address
Concerned Person & Designation
MATERIAL TO BE DRIED :
CAPACITY / Feed / Kgs/hr / Qty / day
Evaporation / Kgs/hr / Qty / day
Product Output / Kgs/hr / Qty / day
FEED CHARACTERISTICS
Form / Solution / / Slurry / Suspended Solids / Present / Absent
Nature / Pumpable / / Abbrasive / / Corrosive
Composition / Weight (%) / Material / Water Solvent (Specify name)
PHYSICAL PROPERTIES :
- Density / pH (Corrosion data)
- Viscosity / Specific Heat
Latent heat of solvent
PRODUCT CHARACTERISTICS
Final Retained Moisture / Solvent / Maximum (%)
Is the material sensitive to heat? / Yes / No
Physical Properties : / Particle density / Bulk density
Is particle size critical / Yes / No If yes, specify the size range & weight % in each range
SOLVENT CHARACTERISTICS
Is solvent / vapours Inflammable ? / Yes / No / If yes, flash point / _____ 0C
Is the solvent toxic? / Yes / No / Is solvent / vapour recovery required : / Yes / No
PROPOSED MODE OF HEATING
Hot Air Generator : / Direct Fired / Indirect Fired with LDO / Furance Oil / Kerosene / Gas
Steam heaters / with dry saturated Steam at______Kgs. / cm2g
Electricity /

Thermic Fluid System

UTILITIES AVAILABLE / Power : 380 / 415V 3 Ph 50 / 60 Hz + 5%
Compressed air at / ______Kgs./cm2g / Cooling water at / ____ 0C at_____ Kgs./cm2g
Dry saturated steam at / ______Kgs. / cm2g / Brine at / ___ 0C______Kgs. / cm2g
SITE CONDITIONS
Altitude / ______Mtrs. / Ambient Temperature / Min : ____ 0C Max : ____0C Avg. : ____0C
Relative Humidity / Max ______% / Installation / Indoor / Outdoor
EXISTING METHOD OF DRING USED
ANY OTHER RELEVANT INFORMATION