SECTION 0970 00

WALL FINISHES

PART 1 GENERAL

1.1 SECTION INCLUDES

  1. Pre-engineered wall system including wall panels, mounting extrusions, corner reveals, panels binders and bases. Wall system comes ready to install with fasteners and other materials required for a complete assembly. Fasteners shall be concealed type.
  1. RELATED SECTIONS
  2. Section 14 20 00 - Elevators.
  3. REFERENCES
  4. ASTM International (ASTM): ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials.
  5. SUBMITTALS
  6. Submit under provisions of Section 01 30 00 - Administrative Requirements.
  7. Product Data: Provide manufacturer's data sheets on each product to be used.
  8. Shop Drawings: Details of construction, including relationship with adjacent materials. Include installation and maintenance instructions.
  9. Verification Samples: For each finish product specified, two samples, minimum size 2-1/2 inches (63 mm) by 1-1/2 inches (38 mm).
  10. QUALITY ASSURANCE
  11. Manufacturer Qualifications: Minimum 10 years experience in manufacture of architectural surface materials.
  12. Installer Qualifications: Minimum threeyears experience in the installation of wall systems.
  13. DELIVERY, STORAGE, AND HANDLING
  14. Deliver materials to installation site in manufacturer's original packaging. Handle products in accordance with manufacturer's instructions. Store in dry, secure location, protected against direct sunlight and excessive heat. Protect finished surfaces.
  15. PROJECT CONDITIONS
  16. Maintain environmental conditions (temperature, humidity and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's limits.
  17. WARRANTY
  18. Warranty: Provide manufacturer's standard one-year warranty against defects and workmanship, from the date of Substantial Completion.

PART 2 PRODUCTS

2.1 MANUFACTURERS

  1. Acceptable Manufacturer: SnapCab; located at 175 Titus Ave. Warrington, PA 18976; Phone: 888-766-7834; Email: ; Web:
  1. WALL PANELS
  2. General:
  3. Thin panel system comprised of removable wall panels with rabbeted joints.
  4. Substrate: (determined by face material and fire rating)
  5. 3/8 inch (10 mm) thick high pressure laminate, non-porous, with integral decorative surface.
  6. 5/8 inch (15 mm) minimum thickness fire-rated resin particle board
  7. 1/2 inch (12 mm) thickness fire-rated resin medium density fiberboard.
  8. Class B or better fire rated. When applicable, panel backer sheet and adhesives as per manufacturer to achieve fire rating as tested
  9. 1/8 inch (3 mm) black shadow lines set into surface
  10. Panel Configuration: SnapCab Wall Paneling System. See drawings for panel layout along with patterns, colors and finishes.
  11. Face Materials

** NOTE TO SPECIFIER ** Delete surface types not required.

  1. Corning Gorilla Glass: 5/64” (2.0 mm) thickness Gorilla Glass, Class A fire rated as per ASME E 84 and LEED compliant, as manufactured by Corning.
  2. Colors, adhered to back face of glass:

** NOTE TO SPECIFIER ** Delete solids, patterns, images not required.

1)Solid Color: (enter color)

2)Patterns: Circles Split, Multi-Bulbs, Multi-Circles, Squares Stacked, Vines, Bulbs, Chevron, Circles, Circles Stacked, Mesh, Multi-Drops, Multi-Diamonds, Ovals, Triangles Stacked, Custom Designed.

3)Images: Customer Supplied or Custom Designed.

  1. Compact, 3/8" (10 mm) thickness fire rated high pressure laminate, non-porous, with integral decorative surface, Class B or better fire rated as per ASME E 84 and LEED compliant, as manufactured by Wilsonart.
  2. Decorative Surface, in Matte Finish:

1)Color/Finish: As selected from manufacturer's standard line.

  1. Virtuon CGF grade, 3/8 inch (10 mm) thickness fire rated high pressure laminate, non-porous, with integral decorative surface, Class A fire rated as per ASME E 84 and LEED compliant, as manufactured by Trespa.
  2. Decorative Surface, in Satin Finish:

1)Color/Finish: As selected from manufacturer's standard line.

  1. Athlon CGF grade, 3/8 inch (10 mm) thickness high pressure laminate, non-porous, with integral decorative surface, Class B or better fire rated as per ASME E 84 and LEED compliant, as manufactured by Trespa.
  2. Decorative Surface, in Quartz Finish:

1)Color/Finish: As selected from manufacturer's standard line.

  1. Wilsonart Laminate: Standard finish, 0.039 inch (0.99 mm) minimum thickness Horizontal Grade Postforming Laminate conforming to NEMA standard HGF, with Class B or better fire rating when laminated to fire-rated particle board as per ASTM E 84.
  2. Color/Finish: As selected from manufacturer's standard line.
  3. Stainless Steel Face:
  4. Smooth Surface Panels: Stainless steel, 20 gauge. Panel assembly to be Class B or better fire rated as per ASTM E 84.

** NOTE TO SPECIFIER ** Delete finishes not required.

1)Finish: No. 4 Satin, Random Swirl, RND Non-Directional

  1. Rigidized Textured Metal Surface Panels: Stainless steel, 20 gauge. Assembly to be Class B or better fire rated as per ASTM E 84.

1)Pattern/Color: As selected from manufacturer's standard line.

  1. Aluminum Face:
  2. Moz: Smooth surface panels of aluminum, 0.040 inch (1.01 mm) thickness, satin finish. Panel assembly to be Class B or better fire rated as per ASTM E 84.

1)Pattern/Color: As selected from manufacturer's standard line.

  1. "GageCarve": Sculpted metal surface panels of aluminum, thickness as per pattern, anodized finish. Panel assembly to be Class B or better fire rated as per ASTM E 84.

1)Pattern/Color: As selected from manufacturer's standard line.

  1. Cast Metal Face:
  2. "GageCast": Textured surface panels of metal particles throughout the casting, thickness as per pattern, high luster finish. Panel assembly to be Class B or better fire rated as per ASTM E 84.

1)Pattern/Color: As selected from manufacturer's standard line.

  1. Bronze Face: Smooth surface panels of bronze, 0.040 inch (1.01 mm) thickness, No. 4 satin finish. Panel assembly to be Class B or better fire rated as per ASTM E 84.
  2. Mirror Face: Clear safety mirror, 1/4 inch (6 mm) thickness, ANSI stamped. Panel assembly to be Class B or better fire rated as per ASTM E 84.
  3. Real Wood Veneer Face: Smooth surface panels of wood veneer on paper backing, satin finish. Panel assembly to be Class B or better fire rated as per ASTM E 84.

** NOTE TO SPECIFIER ** Delete Species not required.

  1. Species and Cut: Afromosia, RT QC;Anigre, FIG QC; Ash, Japanese QC; Bamboo, Narrow;Bamboo Caramel, Narrow; Bamboo Caramel, Wide; Birch, Red FC;Birch, White FC;Cedar, Western Red QC; Cherry, American FC;Cherry, American QC;Cherry, Regal; Cherry, Striawood;Ebony, FT QC;Lacewood, QC;Mahogany, African FC;Maple, Birdseye RC;Maple, QC;Oak, Red FC;Oak, Red RC;Paldao, Figured QC;Rosewood, Andes FC;Rosewood, E. Indian QC; Sapele, Pommele;Sapele, QC;Sycamore, English Figured QC; Teak, QC; Walnut, Burl; Walnut, QC; Wenge, QC; Zebrawood, FT QC
  1. Stone Veneer Face: Stone veneer panels, 1/8 inch (3 mm) thick, on 1/4 inch (6 mm) thick aluminum honeycomb backer. Panel assembly to be Class B or better fire rated as per ASTM E 84. Polished finish.

** NOTE TO SPECIFIER ** Delete types not required.

  1. Stone Type: Absolute Black, Alaska White, Azul Aran, Beige Butterfly, Bianco Gamma, Blue Pearl, BotticinoFiorito, Breccia Onicate, Crema Marfil, Emperador Dark, Emperador Light, Fantasy Brown, GialloNapolene, Giallo Ornamental, Golden Fantasy, Nero Marinace, Vogue, White Carrera, White Ornamental

** NOTE TO SPECIFIER ** First option is standard. Delete types not required.

  1. Base (Toe Kick and Toe Kick Binder for Interlocking Panels):
  2. Satin No. 4 finish 20 gauge stainless steel toe kick with anodized mill finish aluminum binder (standard).
  3. Black powder coat finish 20 gauge stainless steel toe kick with black powder coat finish aluminum binder.
  4. Satin No. 4 finish 0.04 inch (1.01 mm) thick bronze toe kick with anodized mill finish aluminum binder with Satin No. 4 bronze cover.

** NOTE TO SPECIFIER ** First option is standard. Delete types not required.

  1. Top Cap:
  2. Anodized mill finish aluminum top cap (standard).
  3. Black powder coat finish aluminum top cap.
  4. Black powder coat finish aluminum top cap and 0.04 inch (1.01 mm) thick bronze flat insert.

** NOTE TO SPECIFIER ** First option is standard. Delete types not required.

  1. Reveals:
  2. Stainless steel, 20 gauge, No. 4 satin finish (standard).
  3. Black powder coat finish. 20 gauge stainless steel.
  4. Satin bronze. 0.04 inch (1.01 mm) thick, No. 4 finish.

** NOTE TO SPECIFIER ** First option is standard. Delete types not required.

  1. Panel Binders: Standard at exposed panel edges.
  2. Anodized mill finish aluminum (standard).
  3. Black powder coat finish aluminum.
  4. Bronze 0.04 inch (1.01 mm) thick, satin No. 4 finish.

** NOTE TO SPECIFIER ** Delete if not required.

  1. Optional:
  2. Inlay:
  3. Black powder coat finish aluminum inlay set into 1/8 inch (3 mm) shadow lines.
  4. Anodized mill finish aluminum inlay set into 1/8 inch (3 mm) shadow lines.
  5. Satin Stainless inlay set into 1/8 inch (3 mm) shadow lines.

PART 3 EXECUTION

3.1 PREPARATION

  1. Protect wall finishes, fixtures and equipment from damage.
  1. INSTALLATION
  2. Install in accordance with manufacturer's instructions. Install in proper relationship to adjacent materials.
  3. CLEANING AND PROTECTION
  4. Clean exposed surface in accordance with manufacturer's instructions.
  5. Protect exposed surfaces from damage by subsequent construction.

END OF SECTION

0970 00-1