SmartID® MIFARE® and DESFire® Reader Custom Format Request Form
Reader Part Numbers:8030/8100 MIFARE® or DUAL MIFARE / 8030/8100 DESFire®
8031/8101 MIFAREor DUAL MIFARE with Keypad / 8031/8101 DESFirewith Keypad
Description: These custom MIFARE or DESFirereaders offer a complete selection of keys and card formats for adding to existing installations or facilitating companies to manage their own keys and formats. This worksheet will help you gather required information to process orders for these readers.
Please specify the following
A - / Custom Format Number:
B - / New Custom MIFARE Format:
Use MAD (Yes/No): / Yes / No
If Yes, AID (recommended):
If No, Sector:
Block where data is located:
Starting bit:
Number of bits to output:
Block where data is located (2nd, DUAL Only)
Starting bit (2nd, DUAL Only)
Number of bits to output (2nd, DUAL Only)
Custom Keys (Yes/No): / Yes / No
C - / New Custom DESFireFormat:
Specify APPLICATION (AID) or
HID Global’s’ AID (default):
File ID to store data or enter HID Global Default to use HID Global’s’ FILE ID:
File Size, default is 32 Bytes:
File Type, default is 0X00 Standard Data File
Address in file where data is located:
Starting bit:
Number of bits to output:
Custom Keys (Yes/No) : / Yes / No
Security Level: / Plain communication
Plain communication secured by DES/3DES MACing
Fully DES/3DES enciphered communication
Communication mode of the file is used
D - / Output format: / Clock-and-Data / Number of digits:
Wiegand / Number of bits: / Left Parity: / Odd / Even
Calculation First Bit: / Last Bit:
Right Parity: / Odd / Even
Calculation First Bit: / Last Bit:
Serial / Number of chars: / Type (RS232/RS485/RS422): / Baud rate:
E - / User interface:
Card reading beep (Yes/No): / Yes / No
Keypad key press beep (Yes/No): / Yes / No
LED, Left: / Set LED constant green
When combining green and red are combined, the LED will set to yellow. / Set LED green when card is read
Set LED green when key is stroked
Set LED constant red
Set LED red when card is read
Set LED red when key is stroked
LED, Right: / Set LED constant green
When green and red are combined, the LED will set to yellow. / Set LED green when card is read
Set LED green when key is stroked
Set LED constant red
Set LED red when card is read
Set LED red when key is stroked
Input pin 1 (When active to GND): / Used for LED (Left/Right): / Left / Right
LED off
LED to Green
LED to Red
LED to Yellow
Input pin 2 (When active to GND): / Used for LED (Left/Right): / Left / Right
LED off
LED to Green
LED to Red
LED to Yellow
Transfer all keys securely.Do not place keys in this form. All custom formats require time to develop and test. Required is a customer sign-off before fulfilling the first order.
Once your key is encrypted using the HID Key Wrapper program, fill-in the following information:
Wrapped Keys:
Access Key for MIFARE Sector
PICC Master Key
PICC Master Key Settings(Default shown) / Number of keys- 4 (Default shown)
Bit 7 / Bit 6 / Bit 5 / Bit 4 / Bit 3 / Bit 2 / Bit 1 / Bit 0
0 / 0 / 0 / 0 / 1 / 0 / 1 / 1
Bit 3 – Master Key settings are changeable if authenticated with PICC Master Key (ON)
Bit 2 – Create Application / Delete Application is permitted only with PICC Master Key Authentication (OFF)
Bit 1 – GetApplicationIDs and GetKeySettings commands succeed independently of PICC Master Key (ON)
Bit 0 – PICC Master Key Changeable (authentication with the current PICC master key required) (ON)
MAD/Application Master Access Key 0
Application Key Settings (Default shown) / Number of keys- 4 (Default shown)
Bit 7 / Bit 6 / Bit 5 / Bit 4 / Bit 3 / Bit 2 / Bit 1 / Bit 0
1 / 1 / 1 / 0 / 1 / 0 / 1 / 1
Bit 7 – Bit 4 – 0xE Authentication with changed key is necessary (same Key No)
Bit 3 – Configuration settings are changeable if authenticated with Application Master Key (ON)
Bit 2 – Create / Delete File is permitted only with Application Master Key Authentication (OFF)
Bit 1 – GetFileIDs, GetFileSettings and GetKeySettings commands succeed independently (ON)
Bit 0 – Application Master Key Changeable (authentication with current application master key required) (ON)
Application Access Key 1
Application Access Key 2
Application Access Key 3
BIO Application Master Key 0
BIO Application Access Key 3
Wrapping Password (Pass Phrase): / DISTRIBUTED- PHONE ONLY
Using the HID Key Wrapper program keeps your key secure during order processing.
Internal Use: Format Number