SHERWIN-WILLIAMS CO -- B61 W103 KEM A & A EPOXY ENAMEL, MIDTONE BASE -- 8010-00F006829
======Product Identification ======
Product ID:B61 W103 KEM A & A EPOXY ENAMEL, MIDTONE BASE
MSDS Date:01/01/1991
FSC:8010
NIIN:00F006829
MSDS Number: BBWPL
=== Responsible Party ===
Company Name:SHERWIN-WILLIAMS CO
Address:101 PROSPECT AVE N W
City:CLEVELAND
State:OH
ZIP:44115-1042
Country:US
Info Phone Num:(216) 566-2902
Emergency Phone Num:(216) 566-2917
CAGE:54636
=== Contractor Identification ===
Company Name:SHERWIN-WILLIAMS CO THE
Address:101 PROSPECT AVE NW
Box:City:CLEVELAND
State:OH
ZIP:44115-1042
Country:US
Phone:800-251-2486/216-566-2242
CAGE:54636
======Composition/Information on Ingredients ======
Ingred Name:ETHYLENE GLYCOL, GLYCOL
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: <5%
Other REC Limits:10 MG/CUM
ACGIH TLV:C 127 MG/CUM
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Ingred Name:ISOPARAFFINIC HYDROCARBONS (NAPHTHA PETROLEUM),
HYDROTREATED HEAVY, NON AROMATIC HEAVY NAPHTHA) ISOPAR G *92-2*
CAS:64742-48-9
Fraction by Wt: 18%
Other REC Limits:300 PPM EXXON
OSHA PEL:300 PPM
ACGIH TLV:300 PPM
Ingred Name:KEROSENE (PETROLEUM), HYDROTREATED; PETROLEUM DISTILLATE,
HYDROTREATED
CAS:64742-47-8
RTECS #:OA5504000
Fraction by Wt: 26%
OSHA PEL:100 PPM
ACGIH TLV:100 PPM
Ingred Name:MEDIUM ALIPHATIC NAPHTHA (AROMATIC 100), PARAFFIN-NAPTHANES
MINERAL SPIRITS *92/2*
CAS:64742-88-7
Fraction by Wt: 5%
Other REC Limits:100 PPM
OSHA PEL:500 PPM
ACGIH TLV:100 PPM
Ingred Name:XYLENE, DIMETHYLBENZENE, XYLOL
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 1%
Other REC Limits:100 PPM
OSHA PEL:100 PPM
ACGIH TLV:100 PPM, SKIN
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Ingred Name:TALC (POWDER), (ASBESTOS FREE), TALCUM; HYDROUS MAGNESIUM
SILICATE
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 2%
OSHA PEL:20 MPPCF
ACGIH TLV:2 MG/CUM (RESP DUST)
Ingred Name:TITANIUM DIOXIDE, TITANIUM(IV) OXIDE, TIO2
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 11%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293
Ingred Name:WEIGHT PER GALLON IN POUNDS: 8.06
RTECS #:9999999WG
Ingred Name:VOL ORGANIC CMPD: 4.10 LB/GAL
RTECS #:9999999VO
======Hazards Identification ======
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NOOSHA:NO
Health Hazards Acute and Chronic:INHALATION: RESPIRATORY SYSTEM
IRRITATION, NERVOUS SYSTEM DEPRESSION, HEADACHE, DIZZINESS, NAUSEA,
LOSS OF COORDINATION, & POSSIBLY DEATH. SKIN/EYES: IRRITATION,
REDNESS, ITCHING OR BURNING SENSATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: ADVERSE EFFECTS TO LIVER, URINARY
SYSTEMS, PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE. SKIN/EYES:
IRRITATION, REDNESS, ITCHING OR BURNING SENSATION.
======First Aid Measures ======
First Aid:INHALATION: IF AFFECTED, REMOVE FROM EXPOSURE. RESTORE
BREATHING. KEEP WARM/QUIET. SKIN: WASH AFFECTED AREA THOROUGHLY
W/SOAP & WATER. EYES: FLUSH W/PLENTY OF WATER FOR 15 MINS.
INGESTION: OBTAIN MEDI CAL ATTENTION IN ALL CASES.
======Fire Fighting Measures ======
Flash Point Method:PMCC
Flash Point:70F
Lower Limits:0.9%
Upper Limits:6%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:USE FULL PROTECTIVE EQUIP & SCBA. WATER SPRAY:
INEFFECTIVE. FOG NOZZLES: PREFERABLE. USE WATER TO COOL FIRE
EXPOSED CONTAINERS TO PREVENT PRESSURE BUILD-UP.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY BUILD-UP PRESSURE,
EXPLODE OR AUTOIGNITE WHEN EXPOSED TO EXTREME HEAT. APPLICATION TO
HOT SURFACES REQUIRES SPECIAL PRECAUTIONS.
======Accidental Release Measures ======
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE &
REMOVE W/INERT ABSORBENT.
======Handling and Storage ======
Handling and Storage Precautions:KEEP AWAY FROM HEAT/SPARKS/OPEN FLAME.
KEEP AREA VENTILATED. EXTINGUISH FLAMES/PILOT LIGHTS/HEATERS. TURN
OFF STOVES/ELECTRIC TOOLS/APPLIANCES.
Other Precautions:CONSULT NFPA CODE. USE APPROVED BONDING/GROUNDING
PROCEDURES. KEEP CONTAINERS CLOSED WHEN NOT IN USE. TRANSFER ONLY
TO APPROVED CONTAINERS. DON'T TAKE INTERNALLY. KEEP OUT OF REACH OF
CHILDREN. AVOID CONTACT W/SKIN/EYES & BREATHING VAPORS.
======Exposure Controls/Personal Protection ======
Respiratory Protection:USE A NIOSH/MSHA APPROVED PROPERLY FITTED
ORGANIC VAPOR/PARTICULATE RESPIRATOR. USE A NIOSH/MSHA APPROVED
DUST/MIST RESPIRATOR WHEN SANDING OR ABRADING THE DRIED FILM.
Ventilation:LOCAL EXHAUST: PREFERABLE. GENERAL EXHAUST: ACCEPTABLE
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES W/UNPERFORATED SIDESHIELD
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH HANDS AFTER USING.
Supplemental Safety and Health
BOILING RANGE: 240-416F. INTENTIONAL MISUE BY DELIBERATELY
CONCENTRATING & INHALING THE CONTENTS CAN BE HARMFUL OR FATAL.
PRODECT MAY CONTAIN 107-21-1 AS AN INGREDIENT.
======Physical/Chemical Properties ======
Boiling Pt:B.P. Text:SEE SUPP
Vapor Density:>AIR
Spec Gravity:0.91-1.26
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:61-66%
======Stability and Reactivity Data ======
Stability Indicator/Materials to Avoid:YES
NO
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES OR OTHER SOURCES
OF IGNITION
Hazardous Decomposition Products:CO2, CO, OXIDES OF METALS FROM
INGREDIENTS.
======Disposal Considerations ======
Waste Disposal Methods:INCINERATE IN APPROVED FACILITY. DON'T
INCINERATE CLOSED CONTAINER. DISPOSE OF IN ACCORDANCE
W/FED/STATE/LOCAL REGS REGARDING POLLUTION. WASTE MAY BE HAZARDOUS
UNDER RCRA & MUST BE TESTED FOR IGNITABI LITY TO DETERMINE THE
HAZARDOUS WASTE NUMBERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.