SECTION 13700

ACCESS CONTROL SYSTEMS

Logo

Display hidden notes to specifier by using “Tools”/”Options”/“View”/”Hidden Text”.

** NOTE TO SPECIFIER ** Eagle Access Control Systems, Inc.; Gate Operators, Battery Back-up, Gate Hardware and Access Control Accessories.

This section is based on the products of Eagle Access Control Systems, Inc., which is located at:

12953 Foothill Blvd.

Sylmar, CA 91342.

Toll Free Tel: (800) 708-8848 .

Tel: (818) 837-7900.

Fax: (818) 837-7911.

Email: .

Web:

{click Here} for additional information..

Eagle Gate Operators are Rugged, Durable and Installer-Friendly so your satisfaction is guaranteed. They are safe, quiet and smooth. Only Eagle Gate Operators utilize the Diamond Control Board; the most feature-packed control board available. With eagle, the advanced features you most often need come standard.

PART 1 GENERAL

1.1SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

  1. Microprocessor-based vehicular gate operator system including power supply, safety devices and accessories for the following application:
  2. Residential/Lite-Commercial Slide Gate Operators:
  3. Fail Safe: Model No. Eagle-1000-FSF.
  4. Fail Secure: Model No. Eagle-1000-FSC.
  5. Built-in Battery Back-up / Solar Ready: Model No. Eagle-1000-DC.
  6. Commercial Slide Gate Operators:
  7. Fail Safe: Model No. Eagle-2000-FSF.
  8. Fail Secure: Model No. Eagle-2000-FSC.
  9. Fail Secure: Model No. Eagle-2000-1HP.
  10. Fail Secure: Model No. Eagle-2000-DM.
  11. Fail Secure: Model No. Eagle-2000-APT.
  12. Fail Secure: Model No. Eagle-2000-APT-1.5HP.
  13. Fail Secure: Model No. Eagle-2000-APT-DM.
  14. Residential/Lite-Commercial Swing Gate Operators:
  15. Model No. Eagle-100.
  16. Commercial Swing Gate Operators:
  17. Model No. Eagle-200.
  18. Model No. Eagle-200-1HP.
  19. Model No. Eagle-200-DM.

1.2RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

  1. Section 02810 - Fencing.
  1. Section 03330 – Cast In-Place Concrete.
  1. Section 16050 – Basic Electrical Materials and Installation.

1.3REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

  1. Underwriters' Laboratory (UL):
  2. UL 325 - Standard for Safety for Door, Drapery, Gate, Louver, and Window Operators and Systems.
  3. UL 991 - Standard for Tests for Safety-Related Controls Employing Solid-State Devices.
  1. NFPA 70 - National Electrical Code.

1.4SUBMITTALS

  1. Submit under provisions of Section 01300.
  1. Product Data: Manufacturer's data sheets on each product to be used, including:
  2. Product Data Sheets and system description.
  3. Block diagrams.
  4. Equipment list.
  5. Authorized Dealer Certificate and Certified Training Certificates of installers.
  6. Preparation instructions and recommendations.
  7. Storage and handling requirements and recommendations.
  8. Installation methods.
  1. Operation Data: Include two copies of operator manuals.
  1. Maintenance Data: Include maintenance and repair procedures.
  1. Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.

1.5QUALITY ASSURANCE

  1. Manufacturer Qualifications: The access control system shall be from a single-source manufacturer that specializes in the manufacture of electric gate operators of the specified type.
  1. Installer Qualifications: Installer specializing in access control systems with a minimum of three years experience on systems of similar size and scope and acceptable to the manufacturer.
  1. System Requirements:
  2. Design and installation shall comply with applicable codes.
  3. Equipment shall be new, in current production, and a standard product of a manufacture of gate operator equipment.
  4. Manufacturer shall guarantee availability of parts for a minimum of ten years from date of purchase.
  5. Operators shall be built to and fully comply with Underwriter Laboratories Inc. Standard for Safety – Door, Drapery, Louver and Window Operators and Systems, UL325; and Underwriter Laboratories Inc. Standard for Safety – Testes for Safety-Related Controls Employing Solid-State Devices, UL 991.
  6. Safety standards require that multiple external sensors shall be installed that are capable of reversing the gate in either direction according to UL325 and UL991 standards upon sensing an obstruction.
  7. Current safety standards require that vehicular gate operators be designed and labeled for specific usage classes. Operators shall be rated for all Class Standards including Class I, Class II, Class III, and Class IV.

1.6DELIVERY, STORAGE, AND HANDLING

  1. Store vehicular gate operator shall be stored upright in manufacturer's unopened packaging and protected from all weather conditions until ready for installation.

1.7PROJECT CONDITIONS

  1. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's limits.

1.8WARRANTY

  1. Manufacturer’s Warranty: Vehicular Gate Operator shall include factory warranty that all equipment is free from defects in materials and workmanship.
  2. All models in gate operator series Eagle-1000 & Eagle-100.
  3. Standard residential five year warranty.
  4. Standard commercial five year warranty.
  5. All models in series Eagle-2000, Eagle-2000 APT, Eagle-200.
  6. Standard residential seven year warranty.
  7. Standard commercial five year warranty.
  1. Installation Warranty: Installing Contractor shall guarantee equipment and installation for a period of 12 months.

PART 2 PRODUCTS

2.1MANUFACTURERS

  1. Acceptable Manufacturer: Eagle Access Control Systems, Inc.; 12953 Foothill Blvd., Sylmar, CA 91342. ASD. Toll Free Tel: (800) 708-8848. Tel: (818) 837-7900. Fax: (818) 837-7911. Email: . Web:

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

  1. Substitutions: Not permitted.
  1. Requests for substitutions will be considered in accordance with provisions of Section 01600.

** NOTE TO SPECIFIER ** Delete if not required.

2.2RESIDENTIAL/LITE COMMERCIAL SLIDE GATE OPERATORS

  1. Product: Eagle-1000 Series Gate Operators as manufactured by Eagle Access Control Systems, Inc.

** NOTE TO SPECIFIER ** Delete model not required.

  1. Fail Safe: Model No. Eagle-1000-FSF (1/2 HP).
  2. Motor: 1/2 HP continuous duty AC motor 115 VAC at 5.7 A.
  3. Maximum slide gate length 22 feet (6700 mm).
  4. Maximum gate weight is 500 lbs (225 kg).
  5. Manual Release: Fail Safe Model (FSF). Gate operator shall use a fail safe design which allows manual operation of the gate from either inside or out without the use of any tools, keys, or devices. Manual operation of gate shall not result in any injury or damage to gate operator .
  6. Gate Operator speed is 12 inches (305 mm) per second.
  7. Dimensions: 23 inches H by 15-1/2 inches W by 16-1/2 inches D (584 mm by 394 mm by 429 mm).
  8. Weight: 80 lbs (36 kg).
  9. Fail Secure: Model No. Eagle-1000-FSC (1/2 HP).
  10. Motor: 1/2 HP continuous duty AC motor 115 VAC at 5.7 A.
  11. Maximum slide gate length 22 feet (6700 mm).
  12. Maximum gate weight is 500 lbs (225 kg).
  13. Manual Release: Fail Secure Model (FSC). Gate operator shall use a fail secure design which requires use of a hex hand crank to open gate in cases of power outage. Manual release shall be designed in such a way that no injury or damage occurs to the operator or user in case of power being activated during course of manual operation.
  14. Gate Operator speed is 12 inches (305 mm) per second.
  15. Dimensions: 23 inches H by 15-1/2 inches W by 16-1/2 inches D (584 mm by 394 mm by 429 mm).
  16. Weight: 80 lbs (36 kg).
  1. Vehicular Gate Operator:
  2. Housing: Weather resistant black polyethylene cover. .
  3. Power: Primary reduction and power transfer is provided by heavy-duty worm gear running in a continuous oil bath. .
  4. Gear Reducer: Size 50.
  5. Chain Drive: #41 Roller Chain, nickel plated, shall be used as pulling medium. Each gate shall come with 20 feet (6 m) of chain.
  6. No-weld Chain Kit: Each gate operator shall come with chain bracket, chain bolts & hardware for mounting chain.

** NOTE TO SPECIFIER ** Delete if not required.

2.3COMMERCIAL SLIDE GATE OPERATORS

** NOTE TO SPECIFIER ** Delete if not required.

  1. Product: Eagle-2000 Series Gate Operators as manufactured by Eagle Access Control Systems, Inc.

** NOTE TO SPECIFIER ** Delete model not required.

  1. Fail Safe: Model No. Eagle-2000-FSF (1/2 HP).
  2. Motor: 1/2 HP continuous duty AC motor 115 VAC at 5.7 A.
  3. Maximum slide gate length 45 feet (13716 mm).
  4. Maximum gate weight 1000 lbs (450 kg).
  5. Manual Release: Fail Safe Model (FSF). Gate operator shall use a fail safe design which allows manual operation of the gate from either inside or out without the use of any tools, keys, or devices. Manual operation of gate shall not result in any injury or damage to gate operator .
  6. Dimensions: 27 inches H by 18-1/2 inches W by 19-3/4 inches D (686 mm by 470 mm by 502 mm).
  7. Weight: 125 lbs (56 kg).
  8. Fail Secure: Model No. Eagle-2000-FSC (1/2 HP).
  9. Motor: 1/2 HP continuous duty AC motor 115 VAC at 5.7 A.
  10. Maximum slide gate length 45 feet (13716 mm).
  11. Maximum gate weight 1000 lbs (450 kg).
  12. Manual Release: Fail Secure Model (FSC). Gate operator shall use a fail secure design which requires use of a hex hand crank to open gate in cases of power outage. Manual release shall be designed in such a way that no injury or damage occurs to the operator or user in case of power being activated during course of manual operation.
  13. Dimensions: 27 inches H by 18-1/2 inches W by 19-3/4 inches D (686 mm by 470 mm by 502 mm).
  14. Weight: 125 lbs (56 kg).
  15. Fail Secure: Model No. Eagle-2000-1HP (Twin 1/2 HP).
  16. Motor: 2 x 1/2 HP continuous duty AC motors 115 VAC at 11.4 A. (Both motors power open and close operations).
  17. Maximum slide gate length 45 feet (13716 mm).
  18. Maximum gate weight 2000 lbs (900 kg).
  19. Manual Release: Fail Secure Model (FSC). Gate operator shall use a fail secure design which requires use of a hex hand crank to open gate in cases of power outage. Manual release shall be designed in such a way that no injury or damage occurs to the operator or user in case of power being activated during course of manual operation.
  20. Dimensions: 27 inches H by 18-1/2 inches W by 19-3/4 inches D (686 mm by 470 mm by 502 mm).
  21. Weight: 150 lbs (68 kg).

** NOTE TO SPECIFIER ** High Traffic Applications. Delete if not required.

  1. Fail Secure: Model No. Eagle-2000-DM (Dual 1/2 HP).
  2. Motor: 2 x 1/2 HP continuous duty AC motor 115 VAC at 5.7 A. (One motor to open, one motor to close).
  3. Maximum slide gate length 45 feet (13716 mm).
  4. Maximum gate weight 1000 lbs (450 kg).
  5. Manual Release: Fail Secure Model (FSC). Gate operator shall use a fail secure design which requires use of a hex hand crank to open gate in cases of power outage. Manual release shall be designed in such a way that no injury or damage occurs to the operator or user in case of power being activated during course of manual operation.
  6. Dimensions: 27 inches H by 18-1/2 inches W by 19-3/4 inches D (686 mm by 470 mm by 502 mm).
  7. Weight: 150 lbs (68 kg).

** NOTE TO SPECIFIER ** Delete if not required.

  1. Product: Eagle-2000-APT Series Gate Operators as manufactured by Eagle Access Control Systems, Inc.
  2. Gate Operator shall be specially designed for commercial purposes such as apartment buildings and public storage facilities. Gate Operator shall be continuous duty and able to handle continuous cycles in high traffic locations.
  3. Fail Secure: Model No. Eagle-2000-APT (1 HP).
  4. Motor: 1 HP continuous duty AC motor 115 VAC at 10.5 A.
  5. Maximum slide gate length 50 feet (15240 mm).
  6. Maximum gate weight 2000 lbs (900 kg).
  7. Manual Release: Fail Secure Model (FSC). Gate operator shall use a fail secure design which requires use of a hex hand crank to open gate in cases of power outage. Manual release shall be designed in such a way that no injury or damage occurs to the operator or user in case of power being activated during course of manual operation.
  8. Dimensions: 27 inches H by 18-1/2 inches W by 19-3/4 inches D (686 mm by 470 mm by 502 mm).
  9. Weight: 160 lbs (73 kg).
  10. Fail Secure: Model No. Eagle-2000-APT-1.5 HP (Twin 3/4 HP).
  11. Motor: 2 x 3/4 HP continuous duty AC motors 115 VAC at 16.6 A. (Both motors power open and close operations).
  12. Maximum slide gate length 50 feet (15240 mm).
  13. Maximum gate weight 2500 lbs (1125 kg).
  14. Manual Release: Fail Secure Model (FSC). Gate operator shall use a fail secure design which requires use of a hex hand crank to open gate in cases of power outage. Manual release shall be designed in such a way that no injury or damage occurs to the operator or user in case of power being activated during course of manual operation.
  15. Dimensions: 27 inches H by 18-1/2 inches W by 19-3/4 inches D (686 mm by 470 mm by 502 mm).
  16. Weight: 175 lbs (79 kg).

** NOTE TO SPECIFIER ** High Traffic Applications Delete if not required.

  1. Fail Secure: Model No. Eagle-2000-APT-DM (Dual 1 HP).
  2. Motor: 2 x 1 HP continuous duty AC motor 115 VAC at 10.5 A. (One motor to open, one motor to close).
  3. Maximum slide gate length 50 feet (15240 mm).
  4. Maximum gate weight 2000 lbs (900 kg).
  5. Manual Release: Fail Secure Model (FSC). Gate operator shall use a fail secure design which requires use of a hex hand crank to open gate in cases of power outage. Manual release shall be designed in such a way that no injury or damage occurs to the operator or user in case of power being activated during course of manual operation.
  6. Dimensions: 27 inches H by 18-1/2 inches W by 19-3/4 inches D (686 mm by 470 mm by 502 mm).
  7. Weight: 185 lbs (83 kg).
  1. Vehicular Gate Operator:
  2. Housing: Weather resistant black polyethylene cover.
  3. Gate Operator shall include power switch and two electrical outlets.
  4. Power: Primary reduction and power transfer is provided by heavy-duty worm gear running in a continuous oil bath. .

** NOTE TO SPECIFIER ** 2000 model. Delete if not required.

  1. Gear Reducer: Size 60.

** NOTE TO SPECIFIER ** 2000-APT model. Delete if not required.

  1. Gear Reducer: Size 70.
  2. Chain Drive: #40 Roller Chain, nickel plated, shall be used as pulling medium.

** NOTE TO SPECIFIER ** This article is a companion to all slide gate applications. Delete if no swing gate application required.

2.4SLIDE GATE OPERATION

  1. System Performance:
  2. Vehicular slide gate operators shall be tested for UL325 and UL991 compliance and be listed by a Nationally Recognized Testing Laboratory.
  3. Vehicular slide gate is not designed to be used for pedestrian access. Separate pedestrian gates shall be provided when pedestrian traffic is present.
  4. Rated for Class Standards I, II, III, & IV.
  5. Vehicular Slide Gate Operator System shall use a microprocessor based control board to control all functions of the Operator.
  6. Gate Operator shall have audible alarm to alert in case of emergency situation.
  1. Processor Control:
  2. The Gate Operator shall use a model Eagle Diamond Control Board to control all functions of the operator.
  3. Control board shall have built in adjustable timer to allow gate to automatically close.
  4. Control board shall have built in selectable Delayed Open/Delayed Close feature.
  5. Control board shall have ability to communicate in a Master Slave dual operator setup using only 2 wires.
  6. Control board shall have Global Inputs, allowing safety devices to be installed on either gate operator in a Master Slave dual operator setup.
  7. Control board shall be able to accept parallel devices on inputs to enable a limitless amount of safety devices to be used.
  8. Control board shall have built in feature selector with DIP-switches allowing user to customize options and operational settings.

** NOTE TO SPECIFIER ** Not available on Eagle 24 VDC Solar Ready models. Delete if not required.

  1. Control board shall provide onboard 24V AC output for use with safety devices and other accessories.
  2. Control board shall provide onboard 24V DC output for use with safety devices and other accessories.

** NOTE TO SPECIFIER ** Not available on Eagle-I models. Delete if not required.

  1. Control board shall have a One Pass feature to help eliminate tailgating.
  2. Control board shall have built in selectable Stop-Reverse feature to allow gate to be stopped and re-opened / re-closed while moving.
  1. Reversing Detection:
  2. Gate operator shall be designed in such a way that if any obstruction is met during the opening or closing cycle the gate operator will automatically reverse the gate.
  3. The gate operator control board shall check the entrapment sensing system at every cycle of operation.
  4. The gate operator shall be designed that in a Master Slave dual operator system both gate operators will automatically reverse if either operator senses an obstruction.
  5. The Enhanced Reversing Detection (ERD) system shall be designed into the gate operator control board so that in event of failure of external safety devices the gate operator will still be able to sense obstruction and reverse independently of external safety devices.
  6. The gate operator control board shall have separate ERD adjustable potentiometers to enable fine tuning of ERD settings for both the open and close portions of the cycle to maximize safety in all installations including uphill.
  7. The Enhanced Reversing Detection shall monitor the motor current and reverse the gate upon an increase in current draw.
  1. Entrapment Protection:
  2. Gate operator control board shall have built in entrapment detection.
  3. Upon sensing an entrapment (two sequential activations of ERD), gate operator shall stop and activate an internal alarm. Gate operator shall then require manual activation of the reset switch prior to returning to regular operation.

** NOTE TO SPECIFIER ** Delete if not required.

2.5RESIDENTIAL/LITE COMMERCIAL SWING GATE OPERATORS

** NOTE TO SPECIFIER ** Delete if not required.

  1. Product: Eagle-100 Series Gate Operators as manufactured by Eagle Access Control Systems, Inc.

** NOTE TO SPECIFIER ** Delete model not required.

  1. Model No. Eagle-100 (1/2 HP).
  2. Motor: 1/2 HP continuous duty AC motor 115 VAC at 5.7 A.
  3. Maximum gate weight is 600 lbs (270 kg).
  4. Maximum swing gate length 18 feet (5486 mm).
  5. Manual Release: Quick Release.
  6. Dimensions: 27-1/2 inches H by 16 inches W x 18-1/2 inches D (698 mm by 406 mm by 470 mm).
  7. Weight: 170 lbs (77 kg).
  8. Vehicular Gate Operator:
  9. Housing: Weather resistant dark gray polyethylene cover. .
  10. Access: Gate operator cover shall have a stainless steel access door to allow easy access to board and limit assemblies for installation and service.
  11. Swing Arm: No pinch design.
  12. Gate Operator Speed: 18 seconds to 90 degree open.
  13. Gate Operator shall include power switch and two electrical outlets.
  14. Power: Primary reduction and power transfer is provided by heavy-duty worm gear running in a continuous oil bath. .

** NOTE TO SPECIFIER ** Delete gear reducer size not required.

  1. Gear Reducer: Size 40.
  2. Gear Reducer: Size 60.
  3. Chain Drive: #50 Roller Chain, nickel plated.
  4. Drive: Heavy Duty round bar steel arm is used as pulling medium.

** NOTE TO SPECIFIER ** Delete if not required.

2.6COMMERCIAL SWING GATE OPERATORS

  1. Eagle-200 Series Gate Operators as manufactured by Eagle Access Control Systems, Inc.

** NOTE TO SPECIFIER ** Delete model not required.

  1. Model No. Eagle-200.
  2. Motor: 1/2 HP continuous duty AC motor 115 VAC at 5.7 A.
  3. Maximum gate weight is 750 lbs (338 kg).
  4. Maximum swing gate length 20 feet (6096).
  5. Dimensions: 29-1/2 inches H by 18-1/4 inches W x 22-1/2 inches D (749 mm by 464 mm by 572 mm).
  6. Weight: 200 lbs (91 kg).

** NOTE TO SPECIFIER ** High Traffic Applications. Delete if not required.