(Specifier Note: The purpose of this guide specification is to assist the specifier in correctly specifying JELD-WEN® Premium Wood Siteline 400 Series Sliding Patio Doors and JELD-WEN® Premium Wood Siteline Hinged and French Hinged Patio Doors and their installation. The specifier needs to edit these guide specifications to fit the needs of each specific project. Contact a JELD-WEN representative to assist in appropriate product selections. Throughout the guide specification, there are Specifier Notes to assist in the editing of the file. The term Architect is used throughout these guide specifications and may be revised to read “Design Professional”,” Engineer”, “Owner” or other appropriate designation as required for specific projects.

References have been made within the text of the specification to MasterFormat 2004 Section numbers and titles, specifier need to coordinate these numbers and titles with sections included for the specific project. Brackets []; “AND/OR”; and “OR” have been used to indicate when a selection is required, in most cases the first option is the standard feature, and optional features are indicted in brackets. Some options may require additional lead-time, if this is a consideration, contact a JELD-WEN representative for assistance.)

(Specifier Note: Siteline Hinged, Siteline French Hinged and 400 Series Sliding patio doors all have the same profile. Specify 400 Series when a slider is desired, Siteline Hinged when only one operable panel of a 2 panel patio door is desired, and Siteline French Hinged when 2 operable panels are desired.)

SECTION 08 37 00.00.PREMIUM SITELINE

WOOD PATIO DOORS

JELD-WEN® Premium Wood Siteline 400 Series Sliding Patio Doors

JELD-WEN® Premium Wood Siteline Hinged and French Hinged Patio Doors

PART 1 - GENERAL

1.1SECTION INCLUDES

  1. In-Swing Patio Doors
  2. Out-Swing Patio Doors
  3. Sliding Patio Doors

1.2REFERENCES

  1. American Architectural Manufacturer Association (AAMA)
  2. ANSI/AAMA/NWWDA 101/I.S.2 /NAFS; Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors
  1. National Fenestration Rating Council (NFRC)
  2. NFRC 100; Procedure for Determining Fenestration Thermal Properties
  3. NFRC 200; Solar Heat Gain Coefficient and Visible Transmittance
  4. Window & Door Manufacturers Association (WDMA)
  5. WDMA I.S.4; Water Repellent Preservative Non-Pressure treatment for Millwork

1.3DESIGN REQUIREMENTS

  1. Provide patio doors capable of complying with requirements indicated, based on testing manufacturer’s patio doors that are representative of those specified and that are of test size required by ANSI/AAMA/NWWDA 101 I.S.2/NAFS.

(Specifier Note: Include patio door design pressure (DP) ratings as part of the performance requirements. Required DP will vary dependent on project site, the location in the building and patio door size. Coordinate DP with the Structural Engineer. DP ratings and related patio door size and style are available at or by contacting a JELD-WEN representative.)

  1. Structural Requirements – Provide patio doors capable of complying with requirements indicated:
  2. Design pressure: [Insert value] [As indicated on drawings.]

(Specifier Note: Include NFRC ratings as part of the performance requirements. NFRC ratings qualifying for the Energy Star program are based on the performance of the whole door assembly. Qualifying doors vary to fit the needs of different regions throughout the country. NFRC ratings and related JELD-WEN patio door size and styles are available at or by contacting a JELD-WEN representative.)

  1. NFRC Requirements – Provide patio doors capable of complying with the following total patio door ratings:
  2. U-Factor: [Insert value] in accordance with NFRC 100.
  3. Solar Heat Gain Coefficient (SHGC): [Insert value] in accordance with NFRC 200.
  4. Visible Transmittance (VT): [Insert value] in accordance with NFRC 200.

1.4SUBMITTALS

  1. Refer to Section [01 33 00 Submittal Procedures] [Insert section number and title].
  2. Product Data: Submit patio door manufacturer current product literature, including installation instruction.
  3. Samples: Provide finish samples for all products.
  4. Quality Assurance Submittals

(Specifier Note: DELETE Design Data, Test Reports submittal requirements when propriety specification is used and can be held. MAINTAIN Design Data, Test Reports submittal requirement when other products may be submitted as substitution.)

  1. Design Data, Test Reports: Provide manufacturer test reports indicating product compliance with indicated requirements.
  2. Manufacturer Instructions: Provide manufacturer’s written installation instructions.
  1. Closeout Submittals
  2. Refer to Section [01 78 00 Closeout Submittals] [Insert section number and title].

1.5QUALITY ASSURANCE

  1. Qualifications
  2. Certifications
  3. WDMA Hallmark certification label indicating patio doors meet the design requirements.
  4. Mock-ups
  5. Patio door mock-up shall incorporate surrounding construction, including wall assembly fasteners, flashing, and other related accessories installed in accordance with patio door manufacturer’s approved installation methods.
  6. Mock-up size: [Insert size] [As indicated on drawings.]
  7. Mock-up may [not] remain as part of the work.
  8. Pre-installation Meeting
  9. Refer to Section [01 31 19 Project Meetings] [Insert section number and title].

1.6DELIVERY, STORAGE AND HANDLING

  1. Refer to Section [01 60 00 Product Requirements] [Insert section number and title].
  2. Deliver patio door materials and components in manufacturer’s original, unopened, undamaged containers with identification labels intact.
  3. Store patio doors as recommended by manufacturer.

1.7WARRANTY

  1. Refer to Section [01 78 36 Warranties] [Insert section number and title].

(Specifier Note: DELETE warranty information not specific to project.)

(Specifier Note: Manufacturer standard warranty does not include installation.

Manufacturer standard warranty indicating that the patio door unit will be free from material and workmanship defects from the date of substantial completion for the time periods indicated below:

  1. Patio Door Unit: 20 years

(Specifier Note: SELECT warranty associated with the glazing types specified. Specialty glazing includes patterned and textured glass. Insulated glass that incorporates a specialty glass may be eligible for an extended warranty, but requires input from the manufacturer. Contact a JELD-WEN representative to discuss design options and their effect on the warranty. )

  1. Glazing:
  2. Insulated Glass: 20 years against seal breakage
  3. Specialty Glazing: 5 years against delamination

PART 2 - PRODUCTS

(Specifier Note: Product Information is proprietary to JELD-WEN. If additional products are required for competitive procurement, contact JELD-WEN for assistance in listing competitive products that may be available.)

2.1MANUFACTURER

  1. JELD-WEN® Windows and Doors; 3250 Lakeport Blvd. P.O. Box 1329; Klamath Falls, OR 97601-0268, USA; Phone 541.885.7412, fax 541.884.3331; Toll free
    800.535. 3936; website
  2. Basis of Design: Patio Doors are based on JELD-WEN® Premium Wood Siteline 400 Series Sliding Patio Doors and JELD-WEN® Premium Wood Siteline Hinged and French Hinged Patio Doors.

2.2MATERIALS

(Specifier Note: AuraLast® is a proprietary trademark preservative wood treatment by JELD-WEN and is distinguished from traditional envelope preservation methods due to the vacuum/pressure infused treatment through to the cellular level ensuring a minimum penetration of 92%.)

  1. Exterior Wood: Western Pine, preservative treated with AuraLast® in accordance with WDMA I.S.4.
  2. Interior Wood: Western Pine

2.3MANUFACTURED UNITS

  1. Frame
  2. Select kiln-dried pine AuraLast® treated wood
  1. Jamb Width: 4-9/16 inch (116 mm)
  1. Panels

(Specifier Note: Number of panels per patio door unit varies by door size. INCLUDE number of panels under “Size” in Part 3 Schedule Article.)

  1. Select kiln-dried pine AuraLast® treated wood and engineered wood substrate. Select members have a Timberstrand core.
  2. Panel Thickness: 1-23/32 inch (43.7mm)

(Specifier Note: SELECT 5-5/16 inch bottom rail for 6 foot 8 inch height patio doors OR 8-5/16 inch bottom rail for 6 foot 11 inch and 8 foot height patio doors.)

  1. Layout: 4-9/16 inch (116mm) stiles and top rail, [5-5/16 inch (135mm)] [8-5/16 inch (211mm)] bottom rail.

(Specifier Note: Panel options are available on Siteline Hinged and French Hinged units only. DELETE panel options if not project specific.) One horizontal raised panel, or two vertical raised panels.

  1. Panel Options:
  2. [Lock Rail Swing Door]
  3. [Clad Pine Bottom Panel]
  1. Exterior Trim
  2. Drip Cap

(Specifier Note: SELECT standard or only one casings option for construction conditions or aesthetics requirements. Utilize the following casings for indicated applications; Brickmould in conjunction with masonry veneers, Flat Casings for narrow, and Williamsburg Casing for wider aesthetic conditions. Casings may be deleted at the design professional’s option. DELETE casings not project specific)

  1. Casings:
  2. Standard:1-3/32 inch (27.8mm) by 2 inch (50.8mm) brickmould

OR

  1. Options:

1)Flat Casing, 1-3/32 inch (27.8mm) by [2 inch (50.8mm)] [3-1/2 inch (89mm)] [4-1/2 inch (114.3mm)] [5-1/2 inch (139.7mm)]

2)Williamsburg Casing, 1-3/16 inch by 3-1/4 inch

3)Cellular foam PVC (composite) in [standard brickmould] [3-1/2 inch flat] profile

  1. Extension Jambs

(Specifier Note: DELETE extension jambs that are not project specific.)

  1. [400 Series Sliding] [Siteline Out-Swing Hinged] [Siteline French Out-Swing Hinged]: Applied at head and sides of frame interior in wall depths up to 12 inches.
  2. [Siteline In-Swing Hinged] [Siteline French In-Swing Hinged]: Applied at head and sides of frame exterior in wall depths up to 12 inches.
  1. Weatherstripping

(Specifier Note: DELETE weather-stripping for patio door styles not project specific.)

  1. 400 Series Sliding
  2. Head: Ivory colored rigid vinyl parting stop with flexible leaves and rigid vinyl track at operating head.
  3. Meeting Stiles: Ivory colored rigid vinyl interlock sealed with thermoplastic strip and dense pile dust plug at bottom.
  4. Side Jambs: Ivory colored rigid vinyl parting stop with flexible leaves.
  5. Sill: Integral wrapped foam. Dual durometer vinyl at stationary panel.
  6. [Siteline In-Swing Hinged] [Siteline French In-Swing Hinged]
  7. Head: Bronze colored wrapped resilient foam.
  8. Mull Post: Bronze colored wrapped resilient foam.
  9. Side Jambs: Bronze colored wrapped resilient foam.
  10. Sill: Multi-flanged sweep.
  11. [Siteline Out-Swing Hinged] [Siteline French Out-Swing Hinged]
  12. Head: Bronze colored wrapped resilient foam.
  13. Mull Post: Bronze colored wrapped resilient foam.
  14. Side Jambs: Bronze colored wrapped resilient foam.
  15. Sill: Oak extension to contact resilient foam on face of threshold.
  1. Hardware

(Specifier Note: DELETE hardware for patio door styles not project specific.)

  1. 400 Series Sliding
  2. Sliding System: Adjustable, tandem, steel ball bearing rollers on head jamb, interior mounted rigid vinyl track.

(Specifier Note: SELECT standard lock or only one lock option. DELETE locks not project specific.)

  1. Lock (standard): Single point positive locking mechanism with adjustable throw latch.

OR

  1. Lock Options:

1)Lock cylinder with re-key option

2)Multi-point cylinder with solid brass handle

a)Finish: [Antique Brass] [Bright Brass] [Brushed Chrome] [Polished Chrome] [Powder Coat Black] [Powder Coat White] [Oil Rubbed Bronze]

3)Foot activated security lock

(Specifier Note: SELECT standard handle set or only one handle set option. DELETE locks not project specific.)

(Specifier Note: Sliding four panel door includes dummy handle.)

  1. Handle Set (standard):Legacy with brown oak interior handle and black exterior pull.

OR

  1. Handle Set (option): Legacy set in [Antique Brass] [Bright Brass] [Brushed Chrome] [Polished Chrome] [Powder Coat Black] [Powder Coat White] [Oil Rubbed Bronze]
  2. Sill (standard): Dark bronze one-piece pulltruded fiberglass and bronze anodized aluminum track with oak threshold. [option: Molded ABS plastic sill pan]
  1. [Siteline Hinged] [Siteline French Hinged]
  2. Hinges: Standard [option: adjustable] non-ball bearing.

(Specifier Note: SELECT match handle finish for in-swing doors and brushed stainless steel for out-swing doors.)

1)Finish: [Match Handle Finish] [Brushed stainless steel]

(Specifier Note: Standard lock varies by patio door height. SELECT multi-point locks as standard on doors above 8’-0” in height. SELECT multi-point lock as an option for door heights above 6’-2”and below 7’2-1/2” only.)

  1. Lock: [Single point] [Multi-point] system with handle set activated mortise lock.
  2. Handle Set: [standard: [Antique] [Bright] finished solid brass with heavy gauge mill finish strike plate] [options: [[Brushed Chrome] [Polished Chrome] [Powder Coat White] with stainless steel strike plate] [Oil Rubbed Bronze with Oil Rubbed Bronze Strike Plate]]

(Specifier Note: Fiberglass adjustable threshold is available on in-swing doors only.)

  1. Sill (standard): Dark bronze one-piece fiberglass with oak threshold. [options: [Molded ABS plastic sill pan] [ADA sill height] [Fiberglass adjustable threshold]]
  1. Glazing

(Specifier Note: Various types of glass are available. The most common types have been included here. Contact a JELD-WEN representative when other options are required. DELETE glass not project specific.)

(Specifier Note: Reflective glare from glazing has been found to affect the beach nesting of turtles in coastal environments. Some governing authorities require the use of turtle glass which uses tinted glass to achieve an industry-approved, inside-to-outside visible light transmittance value of 45% or less (visible spectrum = 400 to 700 nanometers). Verify the requirements for turtle glass with local authorities in coastal environments.)

(Specifier Note: Tempered glass is required by code.)

  1. Strength: Tempered
  1. Insulated Glass (standard):
  2. Two panes of tempered glass utilizing a continuous roll formed stainless steelspacer and dual seal sealant.
  3. Overall Nominal Thickness: 3/4 inch (19mm)
  4. Type: [standard: Type 1- Clear] [options: [Type 2 – Tinted Bronze] [Specialty Glass – Obscure]]

(Specifier Note: Low E is standard on all patio doors but may be deleted at the design professional’s option. DELETE coatings if not project specific.)

  1. Coatings: Low E on surface 2

(Specifier Note: Argon option is only available with Low E coating and cannot be used with capillary tubes.)

(Specifier Note: Installations at elevations above 4,000 feet Mean Sea Level require glazing known as High Altitude glazing with capillary tubes to equalize environmental stress.)

  1. Air Space: [Air] [Air with capillary tubes] [Argon]

OR

  1. Monolithic Glass(option):
  2. Overall Nominal Thickness: 1/8 inch to ¼ inch
  3. Type: [standard: Type 1- Clear] [options: [Type 2 – Tinted Bronze] [Specialty Glass – Obscure]]

2.4PATIO DOOR ACCESSORIES

(Specifier Note: DELETE accessories for patio door styles not project specific.)

  1. Exterior Insect Screen

(Specifier Note: Insect screens are not available on Siteline Out-Swing Hinged and Siteline French Out-Swing Hinged doors or doors with ADA sills.)

(Specifier Note: 400 Series Sliding 4 panel doors use two sliding screens with field applied astragal. Siteline In-Swing Hinged 2 and 3 panel doors use one sliding screen. Siteline In-Swing Hinged and Siteline French In-Swing Hinged single panel doors use an outward swing hinged screen. DELETE adjustable rollers when only hinged screens are specified.)

(Specifier Note: Applied locking latch is available on Siteline In-Swing Hinged and Siteline French In-Swing Hinged doors only. DELETE applied locking latch if not project specific.)

  1. Material: [standard: Charcoal fiberglass] [option: Aluminum] screen cloth (18 by16 mesh) set in .040 inch (1mm) extruded aluminum frame [with adjustable steel rollers][and applied locking latch].
  2. Frame Color: [Brilliant White] [Chestnut Bronze] [Desert Sand] [French Vanilla] [Hartford Green] [Mesa Red]
  1. Grilles

(Specifier Note: SDL grilles are not available for textured glass, grilles between the glass are not available on monolithic glass. SELECT grilles, profiles, and width based on the desired aesthetic appearance of the patio door.)

  1. Simulated Divided Lites (SDL)
  2. Exterior Muntins

1)Material: Clear pine permanently applied to exterior of insulating glass unit.

2)Pattern:As selected by Architect

3)Width: [7/8 inch (22mm)] [1-1/8 inch (28.5mm)] [1-3/8 inch (34.9mm)] [2-1/8 inch 54mm (for simulated double-hung checkrail)]

4)Finish: Match exterior finish

(Specifier Note: Internal shadow bar will give the appearance of a true divided lite and is standard on all SDL units. Internal shadow bar may be deleted at the design professional’s option. DELETE internal shadow bar if not project specific.)

  1. Internal Shadow Bar: [standard: Light Bronze] [options: Silver]
  2. Interior Muntins

1)Material: Clear pine permanently bonded to interior of insulating glass unit.

2)Profile: Match exterior muntin

OR

  1. Full Surround Wood Grilles
  2. Material: Unfinished clear pine
  3. Profile: Rectangular
  4. Pattern: As selected by Architect
  5. Size: 7/8 inch (22mm)

OR

  1. Grilles Between the Glass (GBG)
  2. Material: Made of roll formed aluminum suspended within the air cavity.

(Specifier Note: Utilize flat for narrow and contour for a wider aesthetic.)

  1. Profile: [Flat] [Contour]
  2. Pattern: As selected by Architect
  3. Width:

1)(Specifier Note: for flat profile) [5/8 inch (22mm)]

OR

2)(Specifier Note: for contour profile) [23/32 inch (18.25mm)] [1 inch (25.4mm)]

  1. Finish: [Brilliant White] [Chestnut Brown] [Desert Sand] [French Vanilla] [Hartford Green] [Mesa Red]

2.5CONSTRUCTION ACCESSORIES

(Specifier Note: Construction Accessories compatible with patio doors and required installation may be specified in this section or in related sections. COORDINATE with related sections to not duplicate information.)

  1. Flashing
  2. Refer to Section [04 20 00 Unit Masonry] [07 60 00 Flashing and Sheet Metal] [Insert section number and title].
  3. Sealants
  4. Refer to Section [07 92 00 Joint Sealants] [Insert section number and title].

OR

(Specifier Note: For sealants specified within this section list recommended products.)

  1. Provide manufacturer recommended sealants maintain watertight conditions.
  2. Products:
  3. [Insert products and manufacturer]

2.6FABRICATION

(Specifier Note: Clear wood construction is not available on all patio door sizes. Contact a JELD-WEN representative to verify availability.)

  1. Frame: [standard: Finger jointed] [option: Clear] wood construction. Corner joints mechanically fastened and sealed with silicone.
  2. Panels: Machine clamped, joined with coped corners and secured with hardwood dowel pins.
  3. Glass: mounted using silicone glazing compound on exterior and acrylic sealant on interior.

2.7FINISH